I am new to Biml and I recently installed it using Manage Extension in Visual Studio 2019
but cannot find it in the bar like below:
Varigence has stopped providing support for the BIML Engine in BI Developer Extensions. They now have their own BimlExpress extension
Go to the Varigence website to download the BimlExpress VSIX file, and install it. While opening Visual Studio, you may see a yellow bar with a warning:
The warning says:
Visual Studio did not load one or more extensions that were using
deprecated APIs.
”Click “Allow synchronous autoload” and restart Visual Studio. BimlExpress will now load without the warning.
Where did the BimlExpress menu go?
Another change in Visual Studio is that individual extension menus are now grouped under the main Extensions menu on the toolbar:
It seems that current version of BIMLExpress (5.0.64108.0) isn't compatible with latest Integration Service-Extension from MS.
Download Version 3.16 (noted as last GA-Version) directly from marketplace and it should work.
Related
I have a VSIX extension (https://github.com/eduelias/AssociateRecentWorkItems) that worked really well on my VS2015 but, as I built/run it on VS2017 (yeah, I've put the prerequisites on the .csproj properties), it is not appearing at 2017's TFS Pending Changes tab.
I've tried updating MIcrosoft.TeamfoundationServer.Controls to the 2017 version but still no success.
As I try to debug it, it seems that VS2017 isn't loading the extension at all. (Breakpoints aren't not been loaded)
Any help is welcome. Thanks!
Give a try with another new extension on VS2017(from marketplace) in your side. If this could also not installed successfully and you are using VS2017 RC.
You may encountered this issue--Unable to install extensions after updating VS2017 RC
Either update to latest VS version or use Stefan Z Camilleri 's workaround in above link.
If only your old extension could not be installed, since
Huge changes have been made by Microsoft on the installation, so
previous approaches of detecting VS won't work any more. For example,
to detect VS installation folder, now a few extra tools or scripts are
required, https://github.com/Microsoft/vswhere
So guides such as How to: Migrate Extensibility Projects to Visual
Studio
2017
are critical and you can follow the tips.
You could also refer more details in this similar question Visual Studio 2017 is not detected by extensions for installation
Looking through the log, I was able to find that some of my references were asking for Microsoft.TeamFoundation.Client Version=14.0.0, in fact, It was the Microsoft.TeamFoundation.VersionControl version=12.0 that were looking for it.
To solve it, I've made a 'binding redirect' like this:
[assembly: ProvideBindingRedirection(AssemblyName = "Microsoft.TeamFoundation.Client", NewVersion = "15.0.0.0", OldVersionLowerBound = "12.0.0.0", OldVersionUpperBound = "14.0.0.0")]
It started appearing at the Exp instance and I was able to debug it.
Note that I strongly advise against doing such kind of workaround but, in my case, it was the only way I could make it load my extension so I could debug it.
As of the VS 2015 SDK, they seem to have switched to NuGet as the source of the SDK reference assemblies, in order to make extension solutions more portable (i.e. developers don't need the whole SDK installed to work on extensions). However, I'm attempting to build a Team Explorer extension, which, according to the only tutorial I could find on the subject, requires objects from the Microsoft.TeamFoundation.Controls assembly. Is there some version of this available from NuGet, so I can continue to avoid referencing the Reference Assemblies directly?
Yes, there is one. You need to run the command: Install-Package Microsoft.TeamFoundation.ReferenceAssemblies . Check this.
You can also install it via Package Manager, see:
However, as you checked, there is only 12.0 version, no 14.0 version available.
I just installed Visual Studio 2013 Ultimate trial version for completing the MVC5 tutorial by Rick Anderson, which worht doing it.
The tutorial: http://www.asp.net/mvc/tutorials/mvc-5/introduction/getting-started.
However, I created a blank solution first and then try to add an ASP.Net Application project, which is going to be my MVC5 tutorial project. And I got this weird message:
Error: this template attempted to load component assembly
'Microsoft.VisualStudio.Web.Project, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a'. For more information on this problem
and how to enable this template, please see documentation on
Customizing Project Templates.
But I´m not customizing, I´m just creating a project out of a built in template.
Do you know how can I solve it?
Here is the solution:
In Visual Studio 2013, select Tools > Extensions and Updates
Check for updates. You should have the Azure SDK update available.
Download and install the Azure SDK. After this, everything should work fine.
If your updates are not turned on, enable your auto detection of updates in Tools > Options > Environment > Extensions.
If you have unspecified error related to E_fail(code), try this:
When creating a new MVC 5 application, change the framework version from 4.5.1 to 4.5, if that did not work change it to 4. Check the below image if it is not clear.
Another approach:
This is really important if you are installing Visual Studio 2013 on un-updated Windows 7.
there reason i am calling out "not updated is",
The reason that 'un-updated' matters is because Visual studio 2013 does not update the powershell that is required by VS2013 for most of the stuff.
The simple solution is to update Powershell to the latest version.
If you are not sure how to update powershell, you can use this tutorial.
So I stumbled upon this issue as well and would like to share how I was able to resolve this problem.
Tools -> Extensions and Updates -> Online -> NGet Package Manager: Click the download button once you have the NGet Package Manager selected. Make sure to restart your Visual Studio after you have downloaded the Manager.
This should do the trick
Close Visual Studio, run the VS executable with the command line option as shown below (you will likely have to supply the full path), and relaunch VS normally. This should re-initialize the templates, including the one that you are having problems with.
devenv.exe /installvstemplates
So I faced the same problem with Visual Studio 2013, and I don't know what's the problem but it appears that it only occurs when creating a new project, and choosing "Web" from the panel.
What I did was simply clicking on "Visual Studio 2012" just below it, and it worked !
I am using Xamarin's Visual Studio pluggin. I have a Xamarin iOS Library project and it needs to use System.Net.Http in order to compile. However, I cannot seem to add it as a reference. I have updated my Xamarin Studio to the Alpha version, but still cannot see System.Net.Http in the Assemblies list when attempting to Add Reference.
Any help here would be GREATLY appreciated as I am inches away from getting this thing implemented, but am stuck on this one reference.
Is this available in Visual Studio (with Xamarin Pluggin installed), or is it only in Xamarin Studio?
Thanks in advance for your help !!
WOW !! What a work around.
Ok, here's the solution. Looks like the Visual Studio pluggin does NOT get updated when you update Xamarin Studio on your windows box. HOWEVER, when you go to your mac build server and update Xamarin to the Alpha version, then open a Xamarin Project in Visual Studio, it will prompt you that the build server and Pluggin are different versions and will allow you to upgrade. When you upgrade, after closing visual studio, then open visual studio again, VOILA!!! The System.Net.Http reference is now available under Assemblies when adding a reference.
So, the solution is to update your MAC Xamarin Studio to the Alpha version and then Visual Studio will prompt you for an update. Update it and you're golden !!
Seems like there should be an easier way, but this one worked.
i think you cant add The System.Net.Http reference.you should try this RestSharp
A simple REST client for consuming HTTP APIs..
RestSharp makes it easy to consume the wide array of services on the web over HTTP, like: Amazon, Facebook, or even Twitter...
http://components.xamarin.com/view/restsharp
I'm using Visual Studio 2010 Ultimate and I after searching for XNA Download on google, I found this page:
http://blogs.msdn.com/b/xna/archive/2010/09/16/xna-game-studio-4-0-available-for-download.aspx
Following the link there, I get to this page:
http://create.msdn.com/en-US/SiteError.aspx?404;aspx&404;http://create.msdn.com:80/launchcenter?lc=1033
So this is kind of confusing for someone starting out.
What is the latest release version of XNA I can use for PC/WP7 game development?
Where can I find the installer to download it?
I don't need a bootstrapper to download Visual Studio for me, as I already has the IDE installed. Thank you!
Here: Microsoft XNA Game Studio 4.0 download.
Also see Windows Phone Developer Tools: Offline ISO Image.
But note that the Web Installer available here will only download and install what you need. Since you already have Visual Studio, it will just integrate itself nicely.
The latest version is XNA 4.0. The bootstrapper is a smart installer and only installs the components you are missing. For example if you have Visual Studio 2010 Ultimate then it is not going to install the Express version as well. It also includes a Windows Phone emulator if you are interested in that. And here's the direct link to the installer.