I have got a variable containing \ and cannot grep properly.
I am making a snippet to connect to wifi spots.
I scan all wifi spots and keep that info in /tmp/wifi.spots
then copy the spot I am interested in (with mouse right click)
then paste the spot name into an input command:
make some other things:
a. grep /tmp/wifi.spots to select the ap with the best Quality (=70/70 if possible)
b. grep /tmp/wifi.spots to configure wpa_conf if there is a password
Here is my code:
iwlist <wifi device> scan > /tmp/wifi.spots
grep /tmp/wifi.spots | grep -i essid
read -rp "what essid you want to connect to?" ESSID
Here comes the problem: Let's say I want to connect to a spot called "G\xC3\x92TIC". In order to grep correctly in /tmp/wifi.spots,I need to rewrite the ESSID variable to:
G\\xC3\\x92TIC
So what I need is the following. After having pasted my essid in ESSID, I need to check it out for any '\' and rewrite the variable if necessary before going through step 4.
Related
I downloaded very huge list of hosts to block ads.
The problem is some sites are broken its functionality, like forum/discussion and/or pics. So i wanna remove some sites in hosts file.
Let say I wanna remove a.com and b.com from hosts.
These methods work.
grep -ve a.com -e b.com hosts > new_hosts
or
egrep -v 'a.com|b.com' hosts > new_hosts
Both are working fine. But if pattern increase, I wanna write the pattern in file.
If I use this
grep -vf pattern.txt hosts > new_hosts
Only the last pattern will be removed.
If pattern.txt contain
a.com
b.com
Only b.com omitted from new_hosts, a.com still written in new_hosts.
So what grep command to use using pattern file?
If you have a hosts file that you want to compare with another file containing entries you want to eliminate, this will be easier with uniq than with grep.
Just combine the files and run something like this:
cat hosts badfile badfile | sort | uniq -u > new_hosts
Badfile is added twice because if an entry is not already present in hosts, it will remain. Duplicating guarantees all copies are eliminated.
Thx for the feedback guys. Since most of you suspect the error from pattern.txt, then I suspect it could be windows notepad which made the error.
New line from Windows notepad is terminated by 0D 0A (hex).
I read somewhere the new line for grep shoud be 0A (hex).
After editing the pattern.txt using Notepad++, this command finally works :-)
grep -vf pattern.txt hosts > new_hosts
Or maybe this is better
fgrep -vf pattern.txt hosts > new_hosts
Both are working perfectly :-)
This question already has answers here:
Match two strings in one line with grep
(23 answers)
Closed 3 years ago.
How do I grep for lines that contain two input words on the line? I'm looking for lines that contain both words, how do I do that? I tried pipe like this:
grep -c "word1" | grep -r "word2" logs
It just stucks after the first pipe command.
Why?
Why do you pass -c? That will just show the number of matches. Similarly, there is no reason to use -r. I suggest you read man grep.
To grep for 2 words existing on the same line, simply do:
grep "word1" FILE | grep "word2"
grep "word1" FILE will print all lines that have word1 in them from FILE, and then grep "word2" will print the lines that have word2 in them. Hence, if you combine these using a pipe, it will show lines containing both word1 and word2.
If you just want a count of how many lines had the 2 words on the same line, do:
grep "word1" FILE | grep -c "word2"
Also, to address your question why does it get stuck : in grep -c "word1", you did not specify a file. Therefore, grep expects input from stdin, which is why it seems to hang. You can press Ctrl+D to send an EOF (end-of-file) so that it quits.
Prescription
One simple rewrite of the command in the question is:
grep "word1" logs | grep "word2"
The first grep finds lines with 'word1' from the file 'logs' and then feeds those into the second grep which looks for lines containing 'word2'.
However, it isn't necessary to use two commands like that. You could use extended grep (grep -E or egrep):
grep -E 'word1.*word2|word2.*word1' logs
If you know that 'word1' will precede 'word2' on the line, you don't even need the alternatives and regular grep would do:
grep 'word1.*word2' logs
The 'one command' variants have the advantage that there is only one process running, and so the lines containing 'word1' do not have to be passed via a pipe to the second process. How much this matters depends on how big the data file is and how many lines match 'word1'. If the file is small, performance isn't likely to be an issue and running two commands is fine. If the file is big but only a few lines contain 'word1', there isn't going to be much data passed on the pipe and using two command is fine. However, if the file is huge and 'word1' occurs frequently, then you may be passing significant data down the pipe where a single command avoids that overhead. Against that, the regex is more complex; you might need to benchmark it to find out what's best — but only if performance really matters. If you run two commands, you should aim to select the less frequently occurring word in the first grep to minimize the amount of data processed by the second.
Diagnosis
The initial script is:
grep -c "word1" | grep -r "word2" logs
This is an odd command sequence. The first grep is going to count the number of occurrences of 'word1' on its standard input, and print that number on its standard output. Until you indicate EOF (e.g. by typing Control-D), it will sit there, waiting for you to type something. The second grep does a recursive search for 'word2' in the files underneath directory logs (or, if it is a file, in the file logs). Or, in my case, it will fail since there's neither a file nor a directory called logs where I'm running the pipeline. Note that the second grep doesn't read its standard input at all, so the pipe is superfluous.
With Bash, the parent shell waits until all the processes in the pipeline have exited, so it sits around waiting for the grep -c to finish, which it won't do until you indicate EOF. Hence, your code seems to get stuck. With Heirloom Shell, the second grep completes and exits, and the shell prompts again. Now you have two processes running, the first grep and the shell, and they are both trying to read from the keyboard, and it is not determinate which one gets any given line of input (or any given EOF indication).
Note that even if you typed data as input to the first grep, you would only get any lines that contain 'word2' shown on the output.
Footnote:
At one time, the answer used:
grep -E 'word1.*word2|word2.*word1' "$#"
grep 'word1.*word2' "$#"
This triggered the comments below.
you could use awk. like this...
cat <yourFile> | awk '/word1/ && /word2/'
Order is not important. So if you have a file and...
a file named , file1 contains:
word1 is in this file as well as word2
word2 is in this file as well as word1
word4 is in this file as well as word1
word5 is in this file as well as word2
then,
/tmp$ cat file1| awk '/word1/ && /word2/'
will result in,
word1 is in this file as well as word2
word2 is in this file as well as word1
yes, awk is slower.
The main issue is that you haven't supplied the first grep with any input. You will need to reorder your command something like
grep "word1" logs | grep "word2"
If you want to count the occurences, then put a '-c' on the second grep.
git grep
Here is the syntax using git grep combining multiple patterns using Boolean expressions:
git grep -e pattern1 --and -e pattern2 --and -e pattern3
The above command will print lines matching all the patterns at once.
If the files aren't under version control, add --no-index param.
Search files in the current directory that is not managed by Git.
Check man git-grep for help.
See also:
How to use grep to match string1 AND string2?
Check if all of multiple strings or regexes exist in a file.
How to run grep with multiple AND patterns?
For multiple patterns stored in the file, see: Match all patterns from file at once.
You cat try with below command
cat log|grep -e word1 -e word2
Use grep:
grep -wE "string1|String2|...." file_name
Or you can use:
echo string | grep -wE "string1|String2|...."
I am trying to create a script, and one part requires showing lines with numeric values.
My basic syntax is:
echo $i | grep [0-9]
For example, I set i=12345, it should output 12345.
But on one server, it doesn't output anything (exactly the same commands).
I do not know how to Google this issue, I have tried "grep output different on other server", to no avail.
When using a regexp, either use egrep or grep -e to make sure the pattern is not treated as a plain string.
maybe it's a shell issue? some shells interpert [] differently
try
echo "1234" | grep "[0-9]"
(with quotes)
also try
grep --version
to see if there is a different grep version
Well, I have a file test.txt
#test.txt
odsdsdoddf112 test1_for_grep
dad23392eeedJ test2 for grep
Hello World test
garbage
I want to extract strings which have got a space after them. I used following expression and it worked
grep -o [[:alnum:]]*.[[:blank:]] test.txt
Its output is
odsdsdoddf112
dad23392eeedJ
test2
for
Hello
World
But problem is grep prints all the strings that have got space after them, where as I want it to stop after first match on a line and then proceed to second line.
Which expression should I use here, in order to make it stop after first match and move to next line?
This problem may be solved with gawk or some other tool, but I will appreciate a solution which uses grep only.
Edit
I using GNU grep 2.5.1 on a Linux system, if that is relevant.
Edit
With the help of the answers given below, I tried my luck with
grep -o ^[[:alnum:]]* test.txt
grep -Eo ^[[:alnum:]]+ test.txt
and both gave me correct answers.
Now what surprises me is that I tried using
grep -Eo "^[[:alnum:]]+[[:blank:]]" test.txt
as suggested here but didn't get the correct answer.
Here is the output on my terminal
odsdsdoddf112
dad23392eeedJ
test2
for
Hello
World
But comments from RichieHindle and Adrian Pronk, shows that they got correct output on their systems. Anyone with some idea that why I too am not getting the same result on my system. Any idea? Any help will be appreciated.
Edit
Well, it seems that grep 2.5.1 has some bug because of which my output wasn't correct. I installed grep 2.5.4, now it is working correctly. Please see this link for details.
If you're sure you have no leading whitespace, add a ^ to match only at the start of a line, and change the * to a + to match only when you have one or more alphanumeric characters. (That means adding -E to use extended regular expressions).
grep -Eo "^[[:alnum:]]+[[:blank:]]" test.txt
(I also removed the . from the middle; I'm not sure what that was doing there?)
As the questioner discovered, this is a bug in versions of GNU grep prior to 2.5.3. The bug allows a caret to match after the end of a previous match, not just at beginning of line.
This bug is still present in other versions of grep, for instance in Mac OS X 10.9.4.
There isn't a universal workaround, but in the some examples, like non-spaces followed by a space, you can often get the desired behavior by leaving off the delimiter. That is, search for '[^ ]*' rather than '[^ ]* '.
grep -oe "^[^ ]* " test.txt
If we want to extract all meaningful input before garbage and actually stop on first match then -B NUM, --before-context=NUM option may be useful to "print NUM lines of leading context before matching lines".
Example:
grep --before-context=999999 "Hello World test"
This question is based on this answer.
Why do you get the same output from the both commands?
Command A
$sudo grep muel * /tmp
masi:muel
Command B
$sudo grep -H muel * /tmp
masi:muel
Rob's comment suggests me that Command A should not give me masi:, but only muel.
In short, what is the practical purpose of -H?
Grep will list the filenames by default if more than one filename is given. The -H option makes it do that even if only one filename is given. In both your examples, more than one filename is given.
Here's a better example:
$ grep Richie notes.txt
Richie wears glasses.
$ grep -H Richie notes.txt
notes.txt:Richie wears glasses.
It's more useful when you're giving it a wildcard for an unknown number of files, and you always want the filenames printed even if the wildcard only matches one file.
If you grep a single file, -H makes a difference:
$ grep muel mesi
muel
$ grep -H muel mesi
masi:muel
This could be significant in various scripting contexts. For example, a script (or a non-trivial piped series of commands) might not be aware of how many files it's actually dealing with: one, or many.
When you grep from multiple files, by default it shows the name of the file where the match was found. If you specify -H, the file name will always be shown, even if you grep from a single file. You can specify -h to never show the file name.
Emacs has grep interface (M-x grep, M-x lgrep, M-x rgrep). If you ask Emacs to search for foo in the current directory, then Emacs calls grep and process the grep output and then present you with results with clickable links. Clickable links, just like Google.
What Emacs does is that it passes two options to grep: -n (show line number) and -H (show filenames even if only one file. the point is consistency) and then turn the output into clickable links.
In general, consistency is good for being a good API, but consistency conflicts with DWIM.
When you directly use grep, you want DWIM, so you don't pass -H.