I've been working with Jetty's Continuations API and just figured out a very frustrating bug (* at least I think this was the reason*).
If I had read more closely, I would have seen this:
The timeout should be set before the suspend, by a call to
continuation.setTimeout(long); if no timeout is set, then the default
period is used.
So in my code, I was simply suspending a continuation without setting a timeout. When I read this in the documentation...
A timeout of <=0 means the continuation will never expire.
... and then tried setting the timeout to something negative, things started working (* at least it seems so *).
Unfortunately, I haven't been able to figure out what the "default period" is for a timeout. Where can I find this out?
I guess I figured this out while stepping through the debugger... the default time period is 30 seconds. I found the source code...
http://www.jarvana.com/jarvana/view/org/eclipse/jetty/aggregate/jetty-all/8.0.4.v20111024/jetty-all-8.0.4.v20111024-sources.jar!/org/eclipse/jetty/continuation/FauxContinuation.java?format=ok
... and it seems like this FauxContinuation implementation of a Continuation was being constructed and the timeout is initialized to 30 seconds.
private long _timeoutMs = 30000;
Related
I have been seeing below error message for quite some time now but could not figure out what leads to the failure.
Error:
concurrent.futures._base.CancelledError: ('sort_index-f23b0553686b95f2d91d4a3fda85f229', 7)
On restart of dask cluster it runs successfully.
If running a dask-cloudprovider ECSCluster or FargateCluster the concurrent.futures._base.CancelledError can result from a long-running step in computation where there is no output (logging or otherwise) to the Client. In these cases, due to the lack of interaction with the client, the scheduler regards itself as "idle" and times out after the configured cloudprovider.ecs.scheduler_timeout period, which defaults to 5 minutes. The CancelledError error message is misleading, but if you look in the logs for the scheduler task itself it will record the idle timeout.
The solution is to set scheduler_timeout to a higher value, either via config or by passing directly to the ECSCluster/FargateCluster constructor.
The deprecated UpdateSystemActivity() works by "notifying the Power Manager that activity has taken place and the timers used to measure idle time should be updated to the time of this call."
The documentation recommends using IOPMAssertionCreateWithName(...) but this method doesn't reset the timer for the idle time; it prevents the machine from sleeping forever until IOPMAssertionRelease(...) is called. Using IOPMAssertionCreateWithName(...) is unsuitable for my current codebase.
Are there any non-deprecated methods that reset the timer for measuring idle time?
Thanks!
"it prevents the machine from sleeping forever until IOPMAssertionRelease(...) is called"
I don't observe this behavior with macOS 10.15, not for IOPMAssertionCreateWithName(...) . In contrast to documentation IOPMAssertionDeclareUserActivity(...) seems to behave like UpdateSystemActivity() and needs to be called periodically.
See snippet of Screen Saver timer event
examples/common/ScreenSaver.cpp
I ran into this same problem and discovered this closely related question which points to the IOPMAssertionDeclareUserActivity function.
You can use this:
IOPMAssertionID assertionID;
IOPMAssertionDeclareUserActivity(CFSTR(""), kIOPMUserActiveLocal, &assertionID);
Here is the answer in Swift 3.x:
var assertionID : IOPMAssertionID = 0
_ = IOPMAssertionDeclareUserActivity("TeslaWatcher" as CFString, kIOPMUserActiveLocal, &assertionID)
My code is: http://ideone.com/nVXIQ.
recv() functions always idling (it works very slow); it takes several seconds to get the result, and recv() should handle quickly such small amount of data.
Is your question about recv's blocking behavior? If so, then investigate using non-blocking IO with something like a select/poll loop.
Suppose I use QTPs recovery scenario manager to set the playback synchronization timeout to 0. The handler would return with "continue with next statement".
I'd do that to make sure that any following playback statements don't waste their time waiting for the next non-existing/non-matching step before failing:
I have a lot of GUI tests that kind of get stuck because let's say if 10 controls are missing, their (consecutive) playback steps produce 10 timeout waits before failing. If the playback timeout is 30 seconds, I loose 10x30 seconds=5 minutes execution time while it really would be sufficient to wait for 30 seconds ONCE (because the app does not change anymore -- we waited a full timeout period already).
Now if I have 100 test cases (=action iterations), this possibly happens 100 times, wasting 500 minutes of my test exec time window.
That's why I come up with the idea of a recovery scenario function setting the timeout to 0 after/upon the first failed playback step. This would accelerate the speed while skipping the rightly-FAILED step, yet would not compromise the precision/reliability of identifying the next matching GUI context (which creates a PASSED step).
Then of course upon the next passed playback step, I would want to restore the original timeout value. How could I do that? This is my question.
One cannot define a recovery scenario function that is called for PASSED steps.
I am currently thinking about setting a method function for Reporter.ReportEvent, and "sniffing" for PASSED log entries there. I'd install that method function in the scenario recovery function which sets timeout to 0. Then, when the "sniffer" function senses a ReportEvent call with PASSED status during one of the following playback steps, I'd reset everything (i.e. restore the original timeout, and uninstall the method function). (I am 99% sure, however, that .Click and .Set methods do not call ReportEvent to write their result status...so this option might probably not work.)
Better ideas? This really bugs me.
It sounds to me like you tests aren't designed correctly, if you fail to find an object why do you continue?
One possible (non recovery scenario) solution would be to use RegisterUserFunc to override the methods you are using in order to do an obj.Exist(0) before running the required method.
Function MyClick(obj)
If obj.Exist(1) Then
obj.Click
Else
Reporter.ReportEvent micFail, "Click failed, no object", "Object does not exist"
End If
End Function
RegisterUserFunc "Link", "Click", "MyClick"
RegisterUserFunc "WebButton", "Click", "MyClick"
''# etc
If you have many controls of which some may be missing and you know that after 10 seconds you mentioned (when the first timeout occurs), nothing more will show up, then you can use the exists method with a timeout parameter.
Something like this:
timeout = 10
For Each control in controls
If control.exists(timeout) Then
do something with the control
Else
timeout = 0
End If
Next
Now only the first timeout will be 10 seconds. Each and every subsequent timeout in your collection of controls will have the timeout set to 0 which will save your time.
I changed the JTA transaction timeout from admin console and set to 300, even after changing it fails saying JTA transaction unexpectedly rolled back (maybe due to a timeout) with a:
weblogic.transaction.RollbackException: Transaction timed out after 181 seconds`
To make sure whether my changes (timeout value 300) got reflected for that domain or not I checked under domain config.xml it got reflected with 300.
My question is, is there any other place also do I need to update the transaction timeout value and do I need to restart the server ?
Full stack trace after the exception from server below:
Caused by: org.springframework.transaction.UnexpectedRollbackException: JTA transaction unexpectedly rolled back (maybe due to a timeout); nested exception is weblogic.transaction.RollbackException: Transaction
timed out after 180 seconds
BEA1-160A800A149091F72E5E
at org.springframework.transaction.jta.JtaTransactionManager.doCommit(JtaTransactionManager.java:1031)
at org.springframework.transaction.support.AbstractPlatformTransactionManager.processCommit(AbstractPlatformTransactionManager.java:709)
at org.springframework.transaction.support.AbstractPlatformTransactionManager.commit(AbstractPlatformTransactionManager.java:678)
at org.springframework.transaction.interceptor.TransactionAspectSupport.completeTransactionAfterThrowing(TransactionAspectSupport.java:359)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy103.saveRegistryData(Unknown Source)
at gov.cms.pqri.arch.submission.registry.bean.RegDataAccessManager.persistRegistry(RegDataAccessManager.java:54)
... 14 more
Caused by: weblogic.transaction.RollbackException: Transaction timed out after 180 seconds
BEA1-160A800A149091F72E5E
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1818)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:333)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:227)
at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:281)
at org.springframework.transaction.jta.JtaTransactionManager.doCommit(JtaTransactionManager.java:1028)
... 22 more
after changing the stuck Thread Max time to 300 under servers -> configuration -> tuning (tab) from admin console it is getting updated and working fine.
I have also came across this issue and have resolved the same, since this is related to JTA transaction so we need to increase the timeout of JTA as well along with the time out for stuck max thread. Please click on JTA from the weblogic console home and increase the JTA timeout from 30(by default) to 300.
We met same issue on Weblogic 12.1.2 [JTA transaction unexpectedly rolled back (maybe due to a timeout)] after all investigation we found the root cause of the problem.In my opinion it occurs due to huge dataset processing transactional and near the end of the process If an exception is thrown, JTA is rolling back data as expected.But it does not give the details of the error.In our case ,it mostly cause because of the database integrity (e.g we try to insert data a column with smaller size than data.)
In summary,it will be the best way to investigate db logs instead of increasing stuck Thread Max time.Thread max time can be a solution,but not a proper solution for real enterprise systems.
Also this issue discussed on another stackover link and hibernate jira issue
And solution suggested:
This is a default behaviour of Weblogic JTA realization. To obtain
root exception you should set system property
weblogic.transaction.allowOverrideSetRollbackReason to true.
One of the solution is add this line into
/bin/setDomainEnv.cmd:
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.transaction.allowOverrideSetRollbackReason=true
I got my JTA timeouts increased by adding jta.properties file into config folder of my app with lines:
com.atomikos.icatch.default_jta_timeout=600000
com.atomikos.icatch.max_timeout=600000