I'm new to Docker, and I'm not sure how to quite deal with this situation.
So I'm trying to run a docker container in order to replicate some results from a research paper, specifically from here: https://github.com/danhper/bigcode-tools/blob/master/doc/tutorial.md
(image link: https://hub.docker.com/r/tuvistavie/bigcode-tools/).
I'm using a windows machine, and every time I try to run the docker image (via: docker run -p 80:80 tuvistavie/bigcode-tools), it instantly closes. I've tried running other images, such as the getting-started, but that image doesn't close instantly.
I've looked at some other potential workarounds, like using -dit, but since the instructions require setting an alias/doskey for a docker run command, using the alias and chaining it with other commands multiple times results in creating a queue for the docker container since the port is tied to the alias.
Like in the instructions from the GitHub link, I'm trying to set an alias/doskey to make api calls to pull data, but I am unable to get any data nor am I getting any errors when performing the calls on the command prompt.
Sorry for the long question, and thank you for your time!
Going in order of the instructions:
0. I can run this, it added the image to my Docker Desktop
1.
Since I'm using a windows machine, I had to use 'set' instead of 'export'
I'm not exactly sure what the $ is meant for in UNIX, and whether or not it has significant meaning, but from my understanding, the whole purpose is to create a directory named 'bigcode-workspace'
Instead of 'alias,' I needed to use doskey.
Since -dit prevented my image from instantly closing, I added that in as well, but I'm not 100% sure what it means. Running docker run (...) resulted in the docker image instantly closing.
When it came to using the doskey alias + another command, I've tried:
(doskey macro) (another command)
(doskey macro) ^& (another command)
(doskey macro) $T (another command)
This also seemed to be using github api call, so I also added a --token=(github_token), but that didn't change anything either
Because the later steps require expected data pulled from here, I am unable to progress any further.
Looks like this image is designed to be used as a command-line utility. So it should not be running continuously, but you run it via alias docker-bigcode for your tasks.
$BIGCODE_WORKSPACE is an environment variable expansion here. So on a Windows machine it's %BIGCODE_WORKSPACE%. You might want to set this variable in Settings->System->About->Advanced System Settings, because variables set with SET command will apply to the current command prompt session only. Or you can specify the path directly, without environment variable.
As for alias then I would just create a batch file with the following content:
docker run -p 6006:6006 -v %BIGCODE_WORKSPACE%:/bigcode-tools/workspace tuvistavie/bigcode-tools %*
This will run the specified command appending the batch file parameters at the end. You might need to add double quotes if BIGCODE_WORKSPACE path contains spaces.
Related
I have a debian package I am deploying that comes with a docker image. On upgrading the package, the prerm script stops and removes the docker image. As a fail safe, I have the preinst script do it as well to ensure the old image is removed before the installation of the new image. If there is no image, the following error reports to the screen: (for stop) No such image: <tag> and (for rmi): No such container: <tag>.
This really isn't a problem, as the errors are ignored by dpkg, but they are reported to the screen, and I get constant questions from the users is that error ok? Did the install fail? etc.
I cannot seem for find the correct set of docker commands to check if a container is running to stop it, and check to see if an image exists to remove it, so those errors are no longer generated. All I have is docker image tag to work with.
I think you could go one of two ways:
Knowing the image you could check whether there is any container based on that image. If yes, find out whether that container is running. If yes, stop it. If not running, remove the image. This would prevent error messages showing up but other messages regarding the container and image handling may be visible.
Redirect output of the docker commands in question, e.g. >/dev/null
you're not limited with docker-cli you know? you can always combine docker-cli commands with linux sh or dos commands as well and also you can write your own .sh scripts and if you don't want to see the errors you can either redirect them or store them to a file such as
to redirect: {operation} 2>/dev/null
to store : {operation} 2>>/var/log/xxx.log
We have some local installers and zip files that we use to build our docker images. It is easy to get this to work in a Dockerfile:
FROM mcr.microsoft.com/windows/nanoserver
COPY myinstaller.exe .
RUN myinstaller.exe; \
del myinstaller.exe
The problem here is that it produces a layer for the COPY line, which increases the size of the image. A common work-around for this is to have one RUN line, that downloads the file from the Internet, runs commands, and then deletes the installation file. The problem, as written above, is that the installers are on the local filesystem.
I found that there is a --squash command for docker:
docker build --squash -t mytestimage .
This does exactly what I want: It gives me an image without this extra installer file that is not necessary. To run this command, you need to enable experimental features though. There is also an open issue to simply remove this feature:
https://github.com/moby/moby/issues/34565
Is there some alternative way of using local installers in a Dockerfile when running on Windows, that doesn't involve setting up a server to provide the files?
We ended up setting up nginx to provide files when building. On our build server, the machine building our docker images and the server that has the installer files have a very good connection between them, so downloading huge files is not a real problem.
When it comes to --squash, it is bugged for Docker on Windows. Here is the relevant issue for it:
https://github.com/moby/moby/issues/31468
There is an issue to move --squash out of experimental, but it doesn't seem to have a lot of support:
https://github.com/moby/moby/issues/38657
The alternative that some people propose instead of --squash is multi stage build, discussion here:
https://github.com/moby/moby/issues/34565
There is an alternative to --squash, if you have local installer files, you don't want to set up a web server, and you would like your docker image to be small, and you are running Windows: Use mapped drives.
In Windows, you can share folders with other users on your network. Docker containers are like another computer that is running on your physical machine, and it can access these network drives.
First set up a new user, for example username share and password password1. Create a folder somewhere on your computer. Then right click it, click properties, and then go to the Sharing tab and click "Share". Find the user that you have just created, using the little dropdown menu and Find people ..., and share the folder with this user.
Create a folder somewhere for your test project. Create a batch file setupshare.bat that looks like this:
#echo off
for /f "tokens=2 delims=:" %%i in ('ipconfig ^| findstr "Default Gateway"') do (
set hostip=%%i
goto :end
)
:end
set hostip=%hostip: =%
net use O: \\%hostip%\vms /USER:share password1
The first part of this file is only to find the ip address that the docker container can use to access its host computer. It is not the most pretty thing I've ever put together, so let me know if there's a better way!
It uses a for-loop, as that is the way to save the output of a command to a variable in batch files. The command is ipconfig, and we pipe it to findstr and searches for Default Gateway. We need to use ^| instead of just | because it is in a for-loop. The first part of the for-loop divides each line from the command on the delimiter, which is : in this case, and we only take the second token. The for-loop only handles the first line, if there are multiple entries with a Default Gateway. This script doesn't work if there are multiple entries and the first one is not the correct one.
The line set hostip=%hostip: =% is to remove a space at the start of the string.
We then have the IP address that we want to use stored in hostip. We use this in the net use command, which will map O:\ to shared folder vms on the machine with IP hostip. We use the username share and the password password1. Note that this is a very bad way of handling passwords, as they kind of should be secret!
With a batch file like this, we can set up a Dockerfile in this way:
# escape=`
FROM mcr.microsoft.com/dotnet/core/sdk:3.0
COPY setupshare.bat .
RUN setupshare.bat && `
copy O:\file.txt file.txt
The RUN command will first call setupshare.bat that sets up the network share properly. We can then use any file that we shared, for example a huge installer, and install the things that we want. In this case I have only shared a test file file.txt to see that it works, so just change that line.
I would still advice everyone to just set up a little web server, for example nginx, and use the standard way of writing Dockerfiles, with downloading files and running it in the same RUN command. That's what people expect when they see a Dockerfile, and it should be a more robust solution.
We can also hope that the Docker people either makes a COPY command that can copy, run, and delete installers in the same layer, or that --squash is implemented properly.
I'm trying to get a task defined in ConEmu to run multiple instance of Ubuntu bash using the WSL layer of Windows 10.
I followed the examples to set up a task to split the UI the way I want, and that part works great. My problem is that I'm trying to use environment variables to pass through commands to run after logging in, and I want different things to run in each panel.
Here is the task command I'm using:
set "STARTUP_CMD='gfp && make server' " & set "PATH=%ConEmuBaseDirShort%\wsl;%PATH%" & %ConEmuBaseDirShort%\conemu-cyg-64.exe --wsl -cur_console:p -cur_console:d:C:\xxx\yyy
On the Linux side I have code in my ~/.bash_aliases file that looks for the STARTUP_CMD env var and tries to execute it. I found code that can pull env vars from the Windows side, which is where the 'set' commands appear to be storing things. Problem is, Windows doesn't know what to do with these, and it tries to expand them when they are read, so it all blows up.
I had this working before, but had to wipe and rebuild my machine recently, and unfortunately didn't have the working command backed up anywhere.
I thought this was the recommended way to run bash with WSL, but I would rather have a way to send stuff directly to the Linux layer as env vars (or if someone has a better way to queue up different commands for each pane, I'm all for that too). Any help would be much appreciated.
Thanks!
Oh course I find the answer right after posting the question... posting here to help others that hit the same issue (or my future self if I forget and have to wipe my machine again).
set "PATH=%ConEmuBaseDirShort%\wsl;%PATH%" & %ConEmuBaseDirShort%\conemu-cyg-64.exe --wsl -eSTARTUP_CMD="gfp && make server" -cur_console:p -cur_console:d:C:\xxx\yyy
You just have to prefix the env var you want with -e and pass it as a param to conemu-cyg. It goes through without any modification on the Windows side and you can read it just like any other env var on the Linux side.
I use Java S2I image for a container running in Openshift (on premise). My problem is that the output of the image is page-buffered and oc logs ... does not show me the last logs.
I could probably spin up my docker image that would do stdbuf -oL -e0 java ... but I would prefer to stick to the 'official' image (just adding the jar to /deployments). Is there any way to reduce buffering (use line-buffering instead of page-buffering), or flush the output on demand?
EDIT: It seems that I could update deployment config and pass stdbuf in there, but that means that I'd have to compose all the args myself. Ideal solution would be passing --tty do Docker, but I can't see how a custom arguments could be passed that way in Openshift.
In your repo, try creating the file .s2i/bin/run. In it add:
#/bin/bash
exec stdbuf -oL -e0 /usr/local/s2i/run
I always forget where the S2I assemble and run scripts are in the Java S2I image, so you may need to replace /usr/local/s2i with the correct path.
What adding this file does is that it will be run as the startup command instead of the original run script. You can then run the original script with stdbuf. Ensure you use exec so that the sub process replaces the current one, else signals will not be propagated through properly.
Even though this might work, am surprised logging isn't working in an unbuffered mode already. I expect there would be a better way of controlling it through some Java config instead.
First off, I really lack a lot of knowledge regarding Docker itself and its structure. I know that it'd be way more beneficial to learn the basics first, but I do require this to work in order to move on to other things for now.
So within a Dockerfile I installed wget & used it to download a file from a website, authentification & download are successful. However, when I later try move said file it can't be found, and it doesn't show up using e.g explorer either (path was specified)
I thought it might have something to do with RUN & how it executes the wget command; I read that the Id can be used to copy it to harddrive, but how'd I do that within a Dockerfile?
RUN wget -P ./path/to/somewhere http://something.com/file.txt --username xyz --password bluh
ADD ./path/to/somewhere/file.txt /mainDirectory
Download is shown & log-in is successful, but as I mentioned I am having trouble using that file later on as it's not to be located on the harddrive. Probably a basic error, but I'd really appreciate some input that might lead to a solution.
Obviously the error is produced when trying to execute ADD as there is no file to move. I am trying to find a way to mount a volume in order to store it, but so far in vain.
Edit:
Though the question is similiar to the "move to harddrive" one, I am searching for ways to get the id of the container created within the Dockerfile in order to move it; while the thread provides such answers, I haven't had any luck using them within the Dockerfile itself.
Short answer is that it's not possible.
The Dockerfile builds an image, which you can run as a short-lived container. During the build, you don't have (write) access to the host and its file system. Which kinda makes sense, since you want to build an immutable image from which to run ephemeral containers.
What you can do is run a container, and mount a path from your host as a volume into the container. This is the only way how you can share files between the host and a container.
Here is an example how you could do this with the sherylynn/wget image:
docker run -v /path/on/host:/path/in/container sherylynn/wget wget -O /path/in/container/file http://my.url.com
The -v HOST:CONTAINER parameter allows you to specify a path on the host that is mounted inside the container at a specified location.
For wget, I would prefer -O over -P when downloading a single file, since it makes it really explicit where your download ends up. When you point -O to the location of the volume, the downloaded file ends up on the host system (in the folder you mounted).
Since I have no idea what your image or your environment looks like, you might need to tweak one or two things to work well with your own image. As a general recommendation: For basic commands like wget or curl, you can find pre-made images on Docker Hub. This can be quite useful when you need to set up a Continuous Integration pipeline or so, where you want to use wget or curl but can't execute it directly.
Use wget -O instead of -P for specific file download
for e.g.,
RUN wget -O /tmp/new_file.txt http://something.com --username xyz --password bluh/new_file.txt
Thanks