docker info
Client:
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc., v0.10.0)
compose: Docker Compose (Docker Inc., v2.15.1)
dev: Docker Dev Environments (Docker Inc., v0.0.5)
extension: Manages Docker extensions (Docker Inc., v0.2.17)
sbom: View the packaged-based Software Bill Of Materials (SBOM) for an image (Anchore Inc., 0.6.0)
scan: Docker Scan (Docker Inc., v0.23.0)
Server:
ERROR: Error response from daemon: open \\.\pipe\docker_engine_windows:
The system cannot find the file specified.
errors pretty printing info**
I tried switch docker and re-installed docker multiple times , haven't added the system path variable. Can you guide or provide me example what I needs to add in system's path var?
Related
I am a beginner at Docker. I need to create two containers for mongo and mongo-express. But, I'm getting an error as error during connect: This error may indicate that the docker daemon is not running.
Then I tried below steps:
I run the cmd as administrator. Then I run the command "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchDaemon. It didn't work for me. then I tried with 'C:\Program Files\Docker\Docker\DockerCli.exe' -SwitchDaemon way. Then I enabled hypervisor also. Still, I am getting the same error. When I ran the docker version command in cmd I received the below-mentioned outputs:
Then after I tried with cd "C:\Program Files\Docker\Docker" and ./DockerCli.exe -SwitchDaemon separately.
docker info command gives below mentioned error:
C:\Windows\system32>docker info
Client:
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc., v0.10.0)
compose: Docker Compose (Docker Inc., v2.15.1)
dev: Docker Dev Environments (Docker Inc., v0.0.5)
extension: Manages Docker extensions (Docker Inc., v0.2.17)
sbom: View the packaged-based Software Bill Of Materials (SBOM) for an image (Anchore Inc., 0.6.0)
scan: Docker Scan (Docker Inc., v0.23.0)
Server:
ERROR: error during connect: In the default daemon configuration on Windows, the docker client must be run with elevated privileges to connect.: Get "http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/info": open //./pipe/docker_engine: The system cannot find the file specified.
errors pretty printing info
Did you install the Docker Desktop on your Windows PC? If not please install it and Run it. If you already installed it, please run it first!
Then you can see whether the docker engine is starting or not!
After the docker engine started check whether this error is still there. Most probably error will fix after doing that!
If the docker engine is not started, please uninstall docker and delete everything from Registry.
Press Win+R and %appdata%\Docker to go and delete all the files.
Then reinstall the docker, if better you can install the docker desktop. Because with the docker desktop, the docker provides a whole bundle with it! Then you will be able to install the docker for windows smoothly.
Because this error usually getting when the docker engine is not started. Also, this may happen missing Linux kernel on windows. Both issues will address with the correct installation of the Docker Desktop.
You can check whether you have a docker Linux subsystem running on your windows pc by running the following command on cmd,
wsl -l
If you get a result like this,
C:\Users\gayan>wsl -l
Windows Subsystem for Linux Distributions:
docker-desktop-data (Default)
docker-desktop
Then you are okay and ready to go.
If not, please try to uninstall and install the docker desktop
Make sure you delete the previous registry, To do that press Win+R and type Regedit Then go to HKEY_LOCAL_MACHINE -> SOFTWARE -> Docker Inc and delete that folder.
If still you are getting the same error, try to troubleshoot the docker desktop. you can refer to the docker documentation.
Just testing on local machine. Windows 7 x64, Minikube 1.14, docker toolbox.
$docker image ls does show the image I would like to use.
REPOSITORY myname/hello-service
TAG 0.0.6
IMAGE ID xxxxxxxxxxx
In my Pod yaml:
spec:
containers:
-name: my-pod
image: myname/hello-service:0.0.6
After running $kubectl create -f pod.yaml. It failed
Error: ImagePullBackOff
Failed to pull image "xxxxx" rpc error: code = ... manifest for myname/hello-service:0.0.6 not found
But the previous version :0.0.5 works just fine.
Both image are build on my machine and store in "default" of docker.
Can it be that myname/hello-service:0.0.6 is only on your windows host? If so, minikube cannot find it.
You have a few options to access in Minikube. One of them is building your local image with minikube's Docker daemon. Another is running a private local Docker registry.
A few examples for this and more I found are [well described here].(https://www.edureka.co/community/17481/local-docker-image-on-minikube)
Try to push it on DockerHub first
docker tag <imageid> <usrDockerHub>/<image_name>:<version>
docker push <usernameDockerHub>/<nome immagine>:<tag>
and try again kubectl create -f pod.yaml
Error on the Rancher server UI side
[workerPlane] Failed to bring up Worker Plane: Failed to create
[kubelet] container on host [ip-address]: Error response from daemon:
invalid mount config: must use either propagation mode "rslave" or
"rshared" when mount source is within the daemon root, daemon root:
"/var/lib/docker", bind mount source: "/var/lib/docker", propagation:
"rprivate"
Docker Version: Docker version 17.12.1-ce
OS: Centos 7
At the time of writing, 17.03 is the latest version of Docker officially supported by K8S/Rancher, and is the latest version from Centos repositories that will function without this error.
However, if you pull from EPEL, docker-ce-17.12.0 will also work.
I have installed docker on windows 10.
Docker version:
Docker version 17.09.0-ce, build afdb6d4
I tried to pull latest ubuntu and ubuntu:16.04 using the bellow two commands
docker pull ubuntu
docker pull ubuntu:16.04
But I am getting the below error.
docker pull ubuntu
Using default tag: latest
latest: Pulling from library/ubuntu
no matching manifest for windows/amd64 in the manifest list entries
So is there any way to fix this issue?
You can't run linux images with a windows daemon.
If you are running Docker for Windows, it gives you the ability to switch between running a Windows Docker daemon and a Linux Docker daemon inside a hyper-v VM.
To run Linux workloads, make sure you have chosen "Switch to Linux Containers" in the Docker for Windows whale icon menu.
please follow the Docker tutorial here
In this case the problem is it requires adding the --experimental flag when starting dockerd.exe.
My platform is :
OS: Ubuntu-16.04
Docker version: 1.12.6, build 78d1802
When I ran docker run swarm create, it failed with following output:
Unable to find image 'swarm:latest' locally
latest: Pulling from library/swarm
ebe0176dcf9a: Pull complete
19f771faa982: Pull complete
902eeedf931a: Pull complete
Digest: sha256:815fc8fd4617d866e1256999c2c0a55cc8f377f3dade26c3edde3f0543a70c04
Status: Downloaded newer image for swarm:latest
<html><body><h1>**503 Service Unavailable**</h1>
**No server is available to handle this request.**
</body></html>
I was doing POC on swarm to orchestrate different docker containers but not able to proceed. Please help in resolving this issue.
The might be some confusion in what you've done.
docker run swarm create is not how you can create a swarm cluster with docker 1.12+.
I don't know precisely what the library/swarm container is for, but definitely not for operating a swarm cluster (maybe an old way for it?).
The command to create a swarm cluster with Docker version 1.12+, on your manager node, is :
docker swarm init --advertise-addr <MANAGER-IP>
You can have a look at this official docker swarm tutorial to do your POC.