I'm using Query and Importrange to pull details from other tabs on a Google Sheet.
The other tabs are linked to individual Google Forms.
I'd like to include the name of the sheet the data came from in the query but can't figure out a way to do this.
Any ideas?
I did try having a column on each sheet that contained the name of the sheet i.e. a column on sheet1 where all the entries are sheet1. Then with the query have that column included in the selection.
However, when new Google Forms submissions are made, a new row is added (I think) and the column that contains the sheet name now has a empty entry where the new row was added.
I'm not able to share the sheet as it contains student info from school and it's not-shareable outside my organisation.
Most likely you are using a drag-down style formula within the form responses tab which would cause this rows not aligning with your already included formula as & when new responses pop in!
You could just use an arrayformula accommodated in the first row_cell itself as shown in the screenshot and it should fix this thing. Please do test it out and let us know if its solved or aint.
=INDEX(IF(LEN(A:A),"SHEET 1",))
Related
Suppose that we have the following Google Sheet (called File_1):
And we import all the columns (A to C) via IMPORTRANGE("https://docs.google.com/spreadsheets/...", "Sheet1!A:C") into another sheet (called File_2), which also contains an additional column New_col with some data in it:
Now, suppose that the source sheet changes like this, i.e., a new row is added in-between the existing rows:
The destination sheet will become like this, in essence keeping Column D in its previous state and 'breaking' the relation of the 'test' value in cell D2 with the A1-B1-C1 row.
What I would like to have instead is the following destination sheet:
Is there a way to do that from within Google Sheets?
You are describing how formula results get misaligned with manually entered data. There is no turn-key solution to work around the issue. Lance has given a thorough treatment of the row misalignment issue and how it can be dealt with in some cases.
I have a Google Sheet that has a main master sheet, with a column for users to fill in their Name to show they are "working" on that row, then that row gets populated to their own tab based on a =QUERY(Master!A3:AA,"select * Where L='Name'") for each of the users' tabs, there is 8 total tabs where users are updating information. This is already quite a bit of processing on Googles part, so I am trying to generate a separate Google Sheet that pulls in the information that the users are entering on each of their tabs so the management can monitor that sheet for updates and then both sheets will run a lot faster/smoother.
I have tried using a VLookup with this syntax: =vlookup(A3,importrange("sheetID",{"Name1!$A$3:$N";"Name2!$A$3:$N";"Name3!$A$3:$N";"Name4!$A$3:$N";"Name5!$A$3:$N";"Name6!$A$3:$N";"Name7!$A$3:$N";"Name8!$A$3:$N"}),12,FALSE) which gives me an #N/A Error, cannot find Value '1' in VLOOKUP evaluation.
I have also tried using a =QUERY({importrange("sheetID"x8 with the ranges)}, "Select Col12,Col13,Col14 where Col2 matches '^.\*($" &B3 & ").\*$'")
That only returns headers, I am trying to get the query to basically find the unique key in Column A then spit out what is in Col 12-14, but that doesn't seem to work either. Columns 1-11 are static, but Columns 12-14 are what I am trying to populate for the management, which is the work that the staff is inputting on each of their tabs.
I can get the query working if I keep it on the same worksheet as the one the staff is working on, but then it bogs down the whole sheet so I would like to keep it separate if possible. Any ideas? I can't provide a sample sheet at this time since it has financial info on it, but I can add more details if I know what to look for.
your formula should be:
=VLOOKUP(A3, {
IMPORTRANGE("sheetID1", "Name1!A3:N");
IMPORTRANGE("sheetID2", "Name2!A3:N");
IMPORTRANGE("sheetID3", "Name3!A3:N");
IMPORTRANGE("sheetID4", "Name4!A3:N");
IMPORTRANGE("sheetID5", "Name5!A3:N");
IMPORTRANGE("sheetID6", "Name6!A3:N");
IMPORTRANGE("sheetID7", "Name7!A3:N");
IMPORTRANGE("sheetID8", "Name8!A3:N")}, 12, 0)
keep in mind that every importrange needs to be run as a standalone formula where you connect your sheets by allowing access. only then you can use the above formula
I'm building a spreadsheet to track my macronutrients and calories. I made a google form for inputting information and it populates a "responses" sheet on google sheets. I made a different sheet within the same spreadsheet to perform all the calculation and generate graphs.
But every time I enter a new response into the form, it creates a new row and changes all the cell references in the calculations sheet. For example, I reference cell A2 from the responses
='Form Responses'!A2
and when I actually fill out the form and it populates, A2 in the responses sheet is filled in but the reference in my calculations sheet has been changed to A3.
='Form Responses'!A3
I tried using $ but it did the same thing, automatically changes the cell that I referenced.
Any way to have my calcuations sheet reference the newly created rows automatically?
In a new tab use for example, = {'Form Responses'! A: Z} and use this data to do your calculations and you will have no problems!
Solution
To avoid the row value to change reference when adding a new response, you will need to add the $ next to the number instead of next to the column value (A):
='Form Responses'!A$2
Moreover, an easy way to reference your whole column is to reference a range instead such as:
='Form Responses'!A:A
And then just drag it through your column. If you want it to be more specific (select the range you want):
='Form Responses'!A2:A999
I hope this has helped you. Let me know if you need anything else or if you did not understood something. :)
I would like to use the text from a cell in a formula in Google Sheets.
I have a document with multiple sheets that a variety of people can edit with a H,M,L (high, medium, low) value from a drop-down list. Each person has their own tab in the Google Sheet.
I then have a dashboard that populates based on their choices of H,M,L. I know that I can use the formula =('Jay Delacruz'!C6) for example to populate a cell in another sheet by manually selecting the cells on the other sheet.
However, I am looking to make quite a few of these documents automatically with another Google Script that I am running that creates the individual sheets from a roster of names on the first tab.
My question is, is it possible to have a =('Jay Delacruz'!C6) type formula that instead of the sheet reference it can pull the name of the person from the roster, as this will match exactly the sheets that are automatically generated by the script I have running.
So I would essentially have a pre-populated dashboard of formulae that would become valid once the sheets are created with the names, as created by the other script.
If it makes it a little clearer, there is a link below to make a copy of the Sheet I am working with. All names were randomly generated, so don't reference any real people or data.
https://docs.google.com/spreadsheets/d/1NiXqko8SibD6VsfrnFcj7e7c99Hg-RoSlHVAYWb0E94/copy
Thank you in advance!
Liam
Try
=INDIRECT(C1&"!C6")
Also see here for more info on INDIRECT() function.
I'm new to programming and would really appreciate some help.
I have two different spreadsheets, one named Database (this is where we put all the details) and the other is named Checklist, both have 1 worksheet each named Sheet1.
Now, what I wanted to do is to get the last populated row from the Database spreadsheet into the Checklist spreadsheet.
I know a formula like:
=FILTER('Sheet 2'!A:A , ROW('Sheet 2'!A:A) =MAX( FILTER( ROW('Sheet 2'!A:A) , NOT(ISBLANK('Sheet 2'!A:A)))))
This gets the last populated row, but this only works within one spreadsheet and doesn't work when I'm working on two different spreadsheets.
How can I get this formula to work with 2 different spreadsheets?
Thank you so much
To access data from another spreadsheet, you can use IMPORTRANGE() (documentation). I suggest you create a new sheet in your Checklist spreadsheet and import the sheet you need from Database into it. Then you'll be able to use your formula.
In Checklist, create a new sheet called "[IMPORTED] Database" (or something like that)
In cell A1 of "[IMPORTED] Database", enter =IMPORTRANGE("database_spreadsheet_url", "Sheet1!A:Z") (modify the range to be what you actually need)
Now adjust your formula for getting the last value to be =FILTER('[IMPORTED] Database'!A:A, ROW('[IMPORTED] Database'!A:A)=MAX(FILTER(ROW('[IMPORTED] Database'!A:A), NOT(ISBLANK('[IMPORTED] Database'!A:A)))))