error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> [11 lines of output]
DEPRECATION: --no-binary currently disables reading from the cache of locally built wheels. In the future --no-binary
will not influence the wheel cache. pip 23.1 will enforce this behaviour change. A possible replacement is to use the --no-cache-dir option. You can use the flag --use-feature=no-binary-enable-wheel-cache to test the upcoming behaviour. Discussion
can be found at https://github.com/pypa/pip/issues/11453
Collecting setuptools
Using cached setuptools-65.6.3-py3-none-any.whl (1.2 MB)
Collecting wheel
Using cached wheel-0.38.4-py3-none-any.whl (36 kB)
Collecting cython!=0.27,!=0.27.2,<=0.29.28,>=0.24
Using cached Cython-0.29.28-py2.py3-none-any.whl (983 kB)
Collecting kivy_deps.gstreamer_dev~=0.3.3
Using cached kivy_deps.gstreamer_dev-0.3.3-cp311-cp311-win_amd64.whl (3.9 MB)
ERROR: Could not find a version that satisfies the requirement kivy_deps.sdl2_dev~=0.4.5 (from versions: 0.5.1)
ERROR: No matching distribution found for kivy_deps.sdl2_dev~=0.4.5
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip
install kivy in vscode from windows
Related
I was trying to create a docker image for a sentiment analysis application. I have the dependencies as follows:
flask
transformers
optimum[onnxruntime]
gunicorn
I have the dockerfile as below:
#Using the base image with python
FROM python:3.8-alpine3.15
#Set our working directory as app
WORKDIR /app
#Installing python dependencies
RUN pip install --upgrade pip
#COPY requirements.txt /
RUN pip install flask transformers optimum[onnxruntime] gunicorn
# Copy the models directory and app.py files
COPY ["./models", "app.py", "./"]
#Exposing the port 5000 from the container
EXPOSE 5000
#Starting the python application
ENTRYPOINT ["gunicorn", "--bind=127.0.0.1:5000", "app:app"]
But I get some errors while executing the following command:
sudo docker build -t sentiment-analysis:v001 .
The error as follows:
Downloading optimum-0.1.2-py3-none-any.whl (33 kB)
Downloading optimum-0.1.1.tar.gz (17 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Downloading optimum-0.1.0.tar.gz (16 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'error'
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> [24 lines of output]
Traceback (most recent call last):
File "<string>", line 7, in <module>
FileNotFoundError: [Errno 2] No such file or directory: 'optimum/version.py'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/lib/python3.8/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in <module>
main()
File "/usr/local/lib/python3.8/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
File "/usr/local/lib/python3.8/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 130, in get_requires_for_build_wheel
return hook(config_settings)
File "/tmp/pip-build-env-z7_0v3f_/overlay/lib/python3.8/site-packages/setuptools/build_meta.py", line 338, in get_requires_for_build_wheel
return self._get_build_requires(config_settings, requirements=['wheel'])
File "/tmp/pip-build-env-z7_0v3f_/overlay/lib/python3.8/site-packages/setuptools/build_meta.py", line 320, in _get_build_requires
self.run_setup()
File "/tmp/pip-build-env-z7_0v3f_/overlay/lib/python3.8/site-packages/setuptools/build_meta.py", line 482, in run_setup
super(_BuildMetaLegacyBackend,
File "/tmp/pip-build-env-z7_0v3f_/overlay/lib/python3.8/site-packages/setuptools/build_meta.py", line 335, in run_setup
exec(code, locals())
File "<string>", line 10, in <module>
AssertionError: Error: Could not open 'optimum/version.py' due [Errno 2] No such file or directory: 'optimum/version.py'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
The command '/bin/sh -c pip install flask transformers optimum[onnxruntime] gunicorn' returned a non-zero code: 1
What could be the problem? Thank you in advance.
I have run my application using gunicorn with no error. Then I tried to create a docker image to deploy the application. But while creating the docker image I got the error mentioned in the post. I was expecting a docker image that could be deployed.
Running on M1 Mac, macOS Monterey 12.4, Python 3.10.3
pip install tables
Collecting tables
Using cached tables-3.7.0.tar.gz (8.2 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... error
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> [12 lines of output]
/var/folders/6g/9c7g_2tx2sb7lp8ttwtfky640000gn/T/H5closew_79lujq.c:2:5: error: implicit declaration of function 'H5close' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
H5close();
^
1 error generated.
cpuinfo failed, assuming no CPU features: No module named 'cpuinfo'
* Using Python 3.10.3 (v3.10.3:a342a49189, Mar 16 2022, 09:34:18) [Clang 13.0.0 (clang-1300.0.29.30)]
* Found cython 0.29.30
* USE_PKGCONFIG: False
.. ERROR:: Could not find a local HDF5 installation.
You may need to explicitly state where your local HDF5 headers and
library can be found by setting the ``HDF5_DIR`` environment
variable or by using the ``--hdf5`` command-line option.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
I tried the following from this GitHub Issue:
pip install cython
brew install hdf5
brew install c-blosc
export HDF5_DIR=/usr/local/
export BLOSC_DIR=/usr/local/
pip install tables
But still getting the same error. Not sure if it's due to Homebrew using a different path on M1 Macs?
The issue is that Homebrew puts the files in opt/homebrew/opt/
This fixed it for me:
export HDF5_DIR=/opt/homebrew/opt/hdf5
export BLOSC_DIR=/opt/homebrew/opt/c-blosc
Again in completion to remove confusion. Running the following in terminal on Mac M1 should work.
pip install cython
brew install hdf5
brew install c-blosc
export HDF5_DIR=/opt/homebrew/opt/hdf5
export BLOSC_DIR=/opt/homebrew/opt/c-blosc
pip install tables
A solution from here solved the issue for me:
https://github.com/freqtrade/freqtrade/issues/4162
Scroll down and see "solution" provided by camxus
I'm working on a cloud-based robotic application with AWS RoboMaker. I'm using ROS Kinetic, with the build tool colcon.
My robot application depends on a custom python module, which has to be in my workspace. This python module is built by colcon as a python package, not a ROS package. This page explains how to do that with catkin, but this example shows how to adapt it to colcon. So finally my workspace looks like that :
my_workspace/
|--src/
|--my_module/
| |--setup.py
| |--package.xml
| |--subfolders and python scripts...
|--some_ros_pkg1/
|--some_ros_pkg2/
|...
However the command : colcon build <my_workspace> builds all ROS packages but fails to build my python module as a package.
Here's the error I get :
Starting >>> my-module
[54.297s] WARNING:colcon.colcon_ros.task.ament_python.build:Package 'my-module' doesn't explicitly install a marker in the package index (colcon-ros currently does it implicitly but that fallback will be removed in the future)
[54.298s] WARNING:colcon.colcon_ros.task.ament_python.build:Package 'my-module' doesn't explicitly install the 'package.xml' file (colcon-ros currently does it implicitly but that fallback will be removed in the future)
--- stderr: my-module
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'egg_info'
---
Failed <<< my-module [0.56s, exited with code 1]
I found this issue that seems correlated, and thus tried : pip install --upgrade setuptools
...Which fails with the error message :
Collecting setuptools
Using cached https://files.pythonhosted.org/packages/7c/1b/9b68465658cda69f33c31c4dbd511ac5648835680ea8de87ce05c81f95bf/setuptools-50.3.0.zip
Complete output from command python setup.py egg_info:
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "setuptools/__init__.py", line 16, in <module>
import setuptools.version
File "setuptools/version.py", line 1, in <module>
import pkg_resources
File "pkg_resources/__init__.py", line 1365
raise SyntaxError(e) from e
^
SyntaxError: invalid syntax
----------------------------------------
Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-uwFamt/setuptools/
And with pip3 install --upgrade setuptools, I get :
Defaulting to user installation because normal site-packages is not writeable
Requirement already up-to-date: setuptools in /home/ubuntu/.local/lib/python3.5/site-packages (50.3.0)
I have both Python 3.5.2 an Python 2.7, but I don't know which one is used by colcon.
So I don't know what to try next, and what the real problem is. Any help welcome !
I managed to correctly install my package and its dependencies. I develop the method below, in case it may help someone someday !
I have been mainly inspired by this old DeepRacer repository.
The workspace tree in the question is wrong. It should look like this:
my_workspace/
|--src/
|--my_wrapper_package/
| |--setup.py
| |--my_package/
| |--__init__.py
| |--subfolders and python scripts...
|--some_ros_pkg1/
|--some_ros_pkg2/
my_wrapper_package may contain more than one python custom package.
A good setup.py example is this one.
You shouldn't put a package.xml next to setup.py : colcon will only look at the dependencies declared in package.xml, and won't collect pip packages.
It may help sometimes to delete the folders my_wrapper_package generated by colcon in install/ and build/. Doing so you force colcon to rebuild and bundle from scratch.
[MIRROR] containerd.io-1.2.0-3.el7.x86_64.rpm: Downloading successful, but checksum doesn't match. Calculated: ece851b2b2defa24eb3b817b14d97f31f4043a713d7367972bd2c1ef4f2788b8(sha256) Expected: 7bd1d8da7d896ead55fdea3a42100eac4c4d7800f958d3ae056d40268dec4636(sha256)
(8/21): python3-policycoreutils-2.9-9.el8.noarch.rpm 107 kB/s | 2.2 MB 00:21
[MIRROR] containerd.io-1.2.0-3.el7.x86_64.rpm: Downloading successful, but checksum doesn't match. Calculated: 3928fc6c58817b02602a249e512d7e99b7c3fe06ea5d9ff3ad46e25984ff8141(sha256) Expected: 7bd1d8da7d896ead55fdea3a42100eac4c4d7800f958d3ae056d40268dec4636(sha256)
[MIRROR] docker-ce-18.09.1-3.el7.x86_64.rpm: Downloading successful, but checksum doesn't match. Calculated: 3ddabd445a05b85aeba128da42283d3285ca8055e6a201139ee49b682942ba43(sha256) Expected: 6034f83c3bf3d5d31120ef36b3172dbb28d1ac8ae3699ed8cb33924dcef0d17a(sha256)
[MIRROR] containerd.io-1.2.0-3.el7.x86_64.rpm: Downloading successful, but checksum doesn't match. Calculated: 3914815a5c9756672d6f046929335ddff86607c29ac8a3c3fc12452a69952bf7(sha256) Expected: 7bd1d8da7d896ead55fdea3a42100eac4c4d7800f958d3ae056d40268dec4636(sha256)
[FAILED] containerd.io-1.2.0-3.el7.x86_64.rpm: No more mirrors to try - All mirrors were already tried without success
(10-11/21): docker-ce-18.09.1-3.el7.x86_64.rpm 50% [============================================== ] 1.4 MB/s | 50 MB 00:35 ETA
The downloaded packages were saved in cache until the next successful transaction.
You can remove cached packages by executing 'yum clean packages'.
Error: Error downloading packages:
Cannot download Packages/containerd.io-1.2.0-3.el7.x86_64.rpm: All mirrors were tried
Error: Transaction test error: package selinux-policy-targeted-3.14.3-41.el8_2.5.noarch does not verify: Header SHA1 digest: BAD (Expected ab8b3fe6b75faa65c89e64ec34986ee49924f982 != 3716bcc257255e43bc9ace1b9c4aecb6fcba3e61) package python3-policycoreutils-2.9-9.el8.noarch does not verify: Header SHA1 digest: BAD (Expected af32d12b99154706740619e0ac39289c009f1aa9 != faa84ee41c25523f2a05358d172f124370c18f99) package containerd.io-1.2.6-3.3.el7.x86_64 does not verify: no digest
''' Please help me to install docker on centos8 to fix this issue SHA1 digest: BAD '''
Try installing packages containerd manually:
yum clean packages #clean packages from failed install
dnf install https://download.docker.com/linux/centos/7/x86_64/stable/Packages/containerd.io-1.2.6-3.3.el7.x86_64.rpm #install newest containerd manually
sudo yum install docker-ce docker-ce-cli #install Docker daemon and CLI
Links:
Install Docker on CentOS
Docker documentation for installation
on CentOS
Docker CentOS repository
I install ubuntu-14.04.4-server-amd64.iso in my VirtualBox,then I use some way to get its rootfs. after that i can the rootfs to create my docker image.the Dockerfile as following:
FROM scratch
COPY rootfs /
RUN chmod u+s /usr/bin/sudo && chmod u+s /bin/mount && chmod u+s /bin/umount
I start my docker container,then I install some tools,like minicom,wget ...,but error,the following is error msg:
root#20ca319c51e6:~$ apt-get install minicom
Reading package lists... Done
Building dependency tree
Reading state information... Done
minicom is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up libpam-systemd:amd64 (204-5ubuntu20.19) ...
initctl: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused
invoke-rc.d: unknown initscript, /etc/init.d/systemd-logind not found.
runlevel:/var/run/utmp: No such file or directory
dpkg: error processing package libpam-systemd:amd64 (--configure):
subprocess installed post-installation script returned error exit status 100
Errors were encountered while processing:
libpam-systemd:amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
I also try to "apt-get update；apt-get upgrade",but get same error msg too,
what's should i do.need you help! thanks all :)