I am using Ubuntu 22.04 version on my Raspberry Pi 4B(RAM 8GB).
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 22.04.1 LTS
Release: 22.04
Codename: jammy
I tried to install Jenkins here and set it up, but if I do installation, the following error is confirmed.
$ sudo apt-get install -y jenkins
Reading package list... Completion
Creating dependency tree... Completion
Reading status information... Completion
We will install the next new package:
jenkins
Zero upgrades, one fresh installation, zero removal, and seven upgrades.
You must receive 0 bytes/92.9 M bytes of archive.
After this operation, 93.6 M bytes of disk space will be used.
Selecting previously unselected package jenkins.
(Reading database...)There are currently 224160 files and directories installed.)
Preparing to unpack .../jenkins_2.375.1_all.deb ...
Unpacking jenkins (2.375.1) ...
Setting jenkins (2.375.1)...
sed: -e expression 1st row, 65th character: invalid contrast character
Created symlink /etc/systemd/system/multi-user.target.wants/jenkins.service → /lib/systemd/system/jenkins.service.
Job for jenkins.service failed because a timeout was exceeded.
See "systemctl status jenkins.service" and "journalctl -xeu jenkins.service" for details.
invoke-rc.d: initscript jenkins, action "start" failed.
● ● jenkins.service - Jenkins Continuous Integration Server
Loaded: loaded (/lib/systemd/system/jenkins.service; enabled; vendor preset: enabled)
Active: activating (auto-restart) (Result: timeout) since Thu 2022-12-15 22:49:44 KST; 24ms ago
Process: 459913 ExecStart=/usr/bin/jenkins (code=exited, status=143)
Main PID: 459913 (code=exited, status=143)
Status: "Jenkins stopped"
CPU: 3min 20.145s
dpkg: error processing package jenkins (--configure):
installed jenkins package post-installation script subprocess returned error exit status 1
There was an error processing:
jenkins
E: Sub-process /usr/bin/dpkg returned an error code (1)
I've tried many things, but I haven't found an answer yet.
If anyone has experienced or solved a similar phenomenon, could you tell me how to solve it?
① I deleted the package and reinstalled it, ② deleted the apt or dpkg cache, and tried to reinstall it, but the same error continues to appear.
In addition, ③ the same error occurs when performing the same operation after rebooting, and if force the Jenkins service to start while installed as above, java accounts for 99% of the CPU and waits indefinitely as shown.
As CPU occupancy continues, Jenkins moves to Bad Message 431.
Related
I am relatively new to Arch Linux.
So i have been dealing with this issue for quite a long time now. I got this new RTL8188FTV wireless USB network adapter and i have tried installing the drivers for it with Paru AUR helper. The installation seems to fail, as it throws this error at the end :
==> ERROR: Missing 5.15.70-1-lts kernel modules tree for module 8188fu/r112.89d7288.
I can confirm the wireless adapter is functional, since it works on Windows
Package Name: 8188fu-kelebek333-dkms-git
Is there a way to install this "kernel modules tree" so i could finish the installation?
Thanks!
Edit: back with more errors
Building module:
Cleaning build area...
'make' all KVER=6.0.5-arch1-1.............(bad exit status: 2)
Error! Bad return status for module build on kernel: 6.0.5-arch1-1 (x86_64)
Consult /var/lib/dkms/8188fu/r113.f5df53d/build/make.log for more information.
error: command failed to execute correctly
:: Running post-transaction hooks...
(1/3) Arming ConditionNeedsUpdate...
(2/3) Install DKMS modules
==> dkms install --no-depmod 8188fu/r113.f5df53d -k 6.0.5-arch1-1
Error! Bad return status for module build on kernel: 6.0.5-arch1-1 (x86_64)
Consult /var/lib/dkms/8188fu/r113.f5df53d/build/make.log for more information.
==> WARNING: `dkms install --no-depmod 8188fu/r113.f5df53d -k 6.0.5-arch1-1' exited 10
==> ERROR: Missing 5.15.75-1-lts kernel modules tree for module 8188fu/r113.f5df53d.
(3/3) Performing snapper post snapshots for the following configurations...
The command
echo 'alias usb:v0BDApF179d*dc*dsc*dp*icFFiscFFipFFin* rtl8188fu' | sudo tee /etc/modprobe.d/r8188eu-blacklist.conf
doesn't seem to do much.
Installation still fails.
Your on kernel 5.15 so you have to backlist the rl8188eu driver. You can do that with this command
echo 'alias usb:v0BDApF179d*dc*dsc*dp*icFFiscFFipFFin* rtl8188fu' | sudo tee /etc/modprobe.d/r8188eu-blacklist.conf
The code was taken from the same repo the aur package was made from
https://github.com/kelebek333/rtl8188fu
I am testing MongooseIM v.5.0.0 for my project.
I download the deb file for Ubuntu Xenial from this link
And I deployed it under Ubuntu 16.04 Xenial AMD in VM.
I haven't customized its config files and just simply run it. My problem is: after restarting my VM a few times, the MongooseIM doesn't want to start and throws an error like below
root#ubuntu:~# mongooseimctl foreground
Root: /usr/lib/mongooseim
Exec: /usr/lib/mongooseim/erts-12.1/bin/erlexec -noshell -noinput +Bd -boot
/usr/lib/mongooseim/releases/5.0.0/start -embedded -config /etc/mongooseim/app.config -
args_file /etc/mongooseim/vm.args -args_file /etc/mongooseim/vm.dist.args -- foreground
fips.c(139): OpenSSL internal error, assertion failed: FATAL FIPS SELFTEST FAILURE
/usr/bin/mongooseimctl: line 165: 856 Aborted
"$RUNNER_SCRIPT_DIR"/mongooseim foreground
I search for this error, but none seems to answer my problem.
Can anybody help me?
[MIRROR] containerd.io-1.2.0-3.el7.x86_64.rpm: Downloading successful, but checksum doesn't match. Calculated: ece851b2b2defa24eb3b817b14d97f31f4043a713d7367972bd2c1ef4f2788b8(sha256) Expected: 7bd1d8da7d896ead55fdea3a42100eac4c4d7800f958d3ae056d40268dec4636(sha256)
(8/21): python3-policycoreutils-2.9-9.el8.noarch.rpm 107 kB/s | 2.2 MB 00:21
[MIRROR] containerd.io-1.2.0-3.el7.x86_64.rpm: Downloading successful, but checksum doesn't match. Calculated: 3928fc6c58817b02602a249e512d7e99b7c3fe06ea5d9ff3ad46e25984ff8141(sha256) Expected: 7bd1d8da7d896ead55fdea3a42100eac4c4d7800f958d3ae056d40268dec4636(sha256)
[MIRROR] docker-ce-18.09.1-3.el7.x86_64.rpm: Downloading successful, but checksum doesn't match. Calculated: 3ddabd445a05b85aeba128da42283d3285ca8055e6a201139ee49b682942ba43(sha256) Expected: 6034f83c3bf3d5d31120ef36b3172dbb28d1ac8ae3699ed8cb33924dcef0d17a(sha256)
[MIRROR] containerd.io-1.2.0-3.el7.x86_64.rpm: Downloading successful, but checksum doesn't match. Calculated: 3914815a5c9756672d6f046929335ddff86607c29ac8a3c3fc12452a69952bf7(sha256) Expected: 7bd1d8da7d896ead55fdea3a42100eac4c4d7800f958d3ae056d40268dec4636(sha256)
[FAILED] containerd.io-1.2.0-3.el7.x86_64.rpm: No more mirrors to try - All mirrors were already tried without success
(10-11/21): docker-ce-18.09.1-3.el7.x86_64.rpm 50% [============================================== ] 1.4 MB/s | 50 MB 00:35 ETA
The downloaded packages were saved in cache until the next successful transaction.
You can remove cached packages by executing 'yum clean packages'.
Error: Error downloading packages:
Cannot download Packages/containerd.io-1.2.0-3.el7.x86_64.rpm: All mirrors were tried
Error: Transaction test error: package selinux-policy-targeted-3.14.3-41.el8_2.5.noarch does not verify: Header SHA1 digest: BAD (Expected ab8b3fe6b75faa65c89e64ec34986ee49924f982 != 3716bcc257255e43bc9ace1b9c4aecb6fcba3e61) package python3-policycoreutils-2.9-9.el8.noarch does not verify: Header SHA1 digest: BAD (Expected af32d12b99154706740619e0ac39289c009f1aa9 != faa84ee41c25523f2a05358d172f124370c18f99) package containerd.io-1.2.6-3.3.el7.x86_64 does not verify: no digest
''' Please help me to install docker on centos8 to fix this issue SHA1 digest: BAD '''
Try installing packages containerd manually:
yum clean packages #clean packages from failed install
dnf install https://download.docker.com/linux/centos/7/x86_64/stable/Packages/containerd.io-1.2.6-3.3.el7.x86_64.rpm #install newest containerd manually
sudo yum install docker-ce docker-ce-cli #install Docker daemon and CLI
Links:
Install Docker on CentOS
Docker documentation for installation
on CentOS
Docker CentOS repository
I'm trying to get Docker installed on a machine with Debian 8 (Jessie), but I always seem to run into errors no matter what I try.
Using these instructions: https://docs.docker.com/install/linux/docker-ce/debian
Checking the kernal:
uname -r
3.16.0-4-686-pae
The fateful moment:
sudo apt-get install docker-ce
Setting up docker-ce (18.06.1~ce~3-0~debian) …
Installing new version of config file /etc/bash_completion.d/docker …
Job for docker.service failed. See ‘systemctl status docker.service’ and ‘journalctl -xn’ for details.
invoke-rc.d: initscript docker, action “start” failed.
dpkg: error processing package docker-ce (–configure):
subprocess installed post-installation script returned error exit status 1
Processing triggers for libc-bin (2.19-18+deb8u10) …
Errors were encountered while processing:
docker-ce
E: Sub-process /usr/bin/dpkg returned an error code (1)
I also tried installing directly from a package: https://download.docker.com/linux/debian/dists/jessie/pool/stable/amd64/
(Selecting version 17.03.2)
And after installing the dependencies, things still don't work:
sudo dpkg --install docker-ce_17.03.2_ce-0_debian-jessie_amd64.deb
(Reading database ... 169325 files and directories currently installed.)
Preparing to unpack docker-ce_17.03.2_ce-0_debian-jessie_amd64.deb ...
Unpacking docker-ce (17.03.2~ce-0~debian-jessie) over (17.03.2~ce-0~debian-jessie) ...
Setting up docker-ce (17.03.2~ce-0~debian-jessie) ...
Job for docker.service failed. See 'systemctl status docker.service' and 'journalctl -xn' for details.
invoke-rc.d: initscript docker, action "start" failed.
dpkg: error processing package docker-ce (--install):
subprocess installed post-installation script returned error exit status 1
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for systemd (215-17+deb8u7) ...
Errors were encountered while processing:
docker-ce
I also looked at this article: http://www.boynux.com/docker-jessie/
But I didn't even get past the first step:
curl https://get.docker.com | sh
Either your platform is not easily detectable or is not supported by this
installer script.
Please visit the following URL for more detailed installation instructions:
https://docs.docker.com/engine/installation/
Between every one of these attempts I did a
sudo apt-get remove docker docker-engine docker.io docker-ce
sudo apt-get update
docker-ce isn't available for i686
see OS requirements
Docker CE is supported on both x86_64 (or amd64) and armhf architectures for Jessie and Stretch.
I install ubuntu-14.04.4-server-amd64.iso in my VirtualBox,then I use some way to get its rootfs. after that i can the rootfs to create my docker image.the Dockerfile as following:
FROM scratch
COPY rootfs /
RUN chmod u+s /usr/bin/sudo && chmod u+s /bin/mount && chmod u+s /bin/umount
I start my docker container,then I install some tools,like minicom,wget ...,but error,the following is error msg:
root#20ca319c51e6:~$ apt-get install minicom
Reading package lists... Done
Building dependency tree
Reading state information... Done
minicom is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up libpam-systemd:amd64 (204-5ubuntu20.19) ...
initctl: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused
invoke-rc.d: unknown initscript, /etc/init.d/systemd-logind not found.
runlevel:/var/run/utmp: No such file or directory
dpkg: error processing package libpam-systemd:amd64 (--configure):
subprocess installed post-installation script returned error exit status 100
Errors were encountered while processing:
libpam-systemd:amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
I also try to "apt-get update；apt-get upgrade",but get same error msg too,
what's should i do.need you help! thanks all :)