Related
I am trying to remove container but when i run docker-compose rm ,runs fine but when i run docker ps then again it shows container:
root#datafinance:/tmp# docker-compose rm
Going to remove tmp_zookeeper_1_31dd890a1cbf
Are you sure? [yN] y
Removing tmp_zookeeper_1_31dd890a1cbf ... done
root#datafinance:/tmp# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
03b08e4ef0b3 confluentinc/cp-zookeeper:latest "/etc/confluent/dock…" 14 hours ago Up 14 hours docker_c_zookeeper_1_7c953dce7d69
Use docker-compose ps, it will show the container which only launched by docker-compose up. If it shows there is no container, then this means this container was not launched by this docker-compose.yaml.
And Error starting userland proxy: listen tcp 0.0.0.0:32181: bind: address already in use' means the port 32181 is occupied either by other docker container or other process. You could use docker rm -f $(docker ps -qa) to delete all containers or more you can use netstat -oanltp | grep 32181 to find which process really occupy 32181.
Finally, if for any reason you did not able to delete container as you said, you can just use service docker restart or systemctl restart docker to make all container down. Then repeat above docker rm xxx.
With above steps, you can use docker compose up -d to use your service now.
try this :
docker rm -f 03b08e4ef0b3
DANGER
you may also try this, but be aware that will delete everything (Containers, Images, Networks, ....)
docker system prune -a -f
when all not helped your last resort is to restart Docker daemon
service docker restart
and then repeat the steps...
I think what you are looking for is :
docker-compose down
which removes the containers after stopping them according to this.
According to this, docker-compose rm removes the "stopped" containers. If your container(s) are running, I think it won't remove to prevent accidents.
I installed docker CE version on an ubuntu 18.04 server. Then, I installed a new jenkins container and everything worked well for two weeks.
After two weeks, for some reason, when I run docker ps I receive an empty list although the jenkins container is running and functioning (it worked in the past). I also tried to run docker ps -a, docker images and again, everything is empty. Also tried restarting the server and still every time the list is empty.
I then uninstalled and reinstalled docker and right after the installation, when running docker ps I see the containers....I thought that the problem was fixed, but today it happened to me again and I still see an empty list when running docker ps. Any ideas ? it will be much appreciated.
Run the command sudo service docker stop
After that find the process dockerd
ps aux | grep "dockerd"
and kill the one by
sudo kill {paste_dockerd_pid_here} -9
Start docker service
sudo service docker start
I am using docker for the first time and I was trying to implement this -
https://docs.docker.com/get-started/part2/#tag-the-image
At one stage I was trying to connect with localhost by this command -
$ curl http://localhost:4000
which showed this error-
curl: (7) Failed to connect to localhost port 4000: Connection refused
However, I have solved this by following code -
$ docker-machine ip default
$ curl http://192.168.99.100:4000
After that everything was going fine, but in the last part, I was trying to run the app by using following line according to the tutorial...
$ docker run -p 4000:80 anibar/get-started:part1
But, I got this error
C:\Program Files\Docker Toolbox\docker.exe: Error response from daemon: driver failed programming external connectivity on endpoint goofy_bohr (63f5691ef18ad6d6389ef52c56198389c7a627e5fa4a79133d6bbf13953a7c98): Bind for 0.0.0.0:4000 failed: port is already allocated.
You need to make sure that the previous container you launched is killed, before launching a new one that uses the same port.
docker container ls
docker rm -f <container-name>
Paying tribute to IgorBeaz, you need to stop running the current container. For that you are going to know current CONTAINER ID:
$ docker container ls
You get something like:
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
12a32e8928ef friendlyhello "python app.py" 51 seconds ago Up 50 seconds 0.0.0.0:4000->80/tcp romantic_tesla
Then you stop the container by:
$ docker stop 12a32e8928ef
Finally you try to do what you wanted to do, for example:
$ docker run -p 4000:80 friendlyhello
I tried all the above answers, none of them worked, in my case even docker container ls doesn't show any container running. It looks like the problem is due to the fact that the docker proxy is still using ports although there are no containers running. In my case I was using ubuntu. Here's what I tried and got the problem solved, just run the following two commands:
sudo service docker stop
sudo rm -f /var/lib/docker/network/files/local-kv.db
I solved it this way:
First, I stopped all running containers:
docker-compose down
Then I executed a lsof command to find the process using the port (for me it was port 9000)
sudo lsof -i -P -n | grep 9000
Finally, I "killed" the process (in my case, it was a VSCode extension):
kill -9 <process id>
The quick fix is a just restart docker:
sudo service docker stop
sudo service docker start
Above two answers are correct but didn't work for me.
I kept on seeing blank like below for docker container ls
then I tried, docker container ls -a and after that it showed all the process previously exited and running.
Then docker stop <container id> or docker container stop <container id> didn't work
then I tried docker rm -f <container id> and it worked.
Now at this I tried docker container ls -a and this process wasn't present.
When I used nginx docker image, I also got this error:
docker: Error response from daemon: driver failed programming external connectivity on endpoint recursing_knuth (9186f7d7f523732b99d3510029cde9679f3f3fe7b7eb5f612d54c4aacea58220): Bind for 0.0.0.0:8080 failed: port is already allocated.
And I solved it using following commands:
$ docker container ls
$ docker stop [CONTAINER ID]
Then, running this docker container(like this) again is ok:
$ docker run -v $PWD/vueDemo:/usr/share/nginx/html -p 8080:80 -d nginx:alpine
You just need to stop the previous docker container.
I have had same problem with docker-compose, to fix it:
Killed docker-proxy processe
Restart docker
Start docker-compose again
docker ps will reveal the list of containers running on docker. Find the one running on your needed port and note down its PID.
Stop and remove that container using following commands:
docker stop PID
docker rm PID
Now run docker-compose up and your services should run as you have freed the needed port.
on linux 'sudo systemctl restart docker' solved the issue for me
For anyone having this problem with docker-compose.
When you have more than one project (i.e. in different folders) with similar services you need to run docker-compose stop in each of your other projects.
If you are using Docker-Desktop, you can quit Docker Desktop and then restart it. It solved the problem for me.
In my case, there was no process to kill.
Updating docker fixed the problem.
It might be a conflict with the same port specified in docker-compose.yml and docker-compose.override.yml or the same port specified explicitly and using an environment variable.
I had a docker-compose.yml with ports on a container specified using environment variables, and a docker-compose.override.yml with one of the same ports specified explicitly. Apparently docker tried to open both on the same container. docker container ls -a listed neither because the container could not start and list the ports.
For me the containers where not showing up running, so NOTHING was using port 9010 (in my case) BUT Docker still complained.
I did not want to reset my Docker (for Windows) so what I did to resolve it was simply:
Remove the network (I knew that before a container was using this network with the port in question (9010) docker network ls docker network rm blabla (or id)
I actually used a new network rather than the old (buggy) one but shouldn't be needed
Restart Docker
That was the only way it worked for me. I can't explain it but somehow the "old" network was still bound to that port (9010) and Docker kept on "blocking" it (whinching about it)
FOR WINDOWS;
I killed every process that docker use and restarted the docker service on services. My containers are working now.
It is about ports that is still in use by Docker even though you are not using on that moment.
On Linux, you can run sudo netstat -tulpn to see what is currently listening on that port. You can then choose to configure either that process or your Docker container to bind to a different port to avoid the conflict.
Stopping the container didn't work for me either. I changed the port in docker-compose.yml.
For me, the problem was mapping the same port twice.
Due to a parametric docker run, it ended up being something like
docker run -p 4000:80 -p 4000:80 anibar/get-started:part1
notice double mapping on port 4000.
The log is not informative enough in this case, as it doesn't state I was the cause of the double mapping, and that the port is no longer bound after the docker run command returns with a failure.
Don't forget the easiest fix of all....
Restart your computer.
I have tried most of the above and still couldn't fix it. Then just restart my Mac and then it's all back to normal.
For anyone still looking for a solution, just make sure you have binded your port the right way round in your docker-compose.yml
It goes:
- <EXTERNAL SERVER PORT>:<INTERNAL CONTAINER PORT>
Had the same problem. Went to Docker for Mac Dashboard and clicked restart. Problem solved.
my case was dump XD I was exposing port 80 twice :D
ports:
- '${APP_PORT:-80}:80'
- '${APP_PORT:-8080}:8080'
APP_PORT is defined, thus 80 was exposed twice.
I tried almost all solutions and found out the probable/possible reason/solution. So, If you are using traefik or any other networking server, they internally facilitate proxy for load balacing. That, most use the blueprint as it, works pretty fine. It then passes the load control entirely to nginx or similiar proxy servers. So, stopping, killing(networking server) or pruning might not help.
Solution for traefik with nginx,
sudo /etc/init.d/nginx stop
# or
sudo service nginx stop
# or
sudo systemctl stop nginx
Credits
How to stop docker processes
Making Docker Stop Itself <- Safe and Fast
this is the best way to stop containers and all unstoppable processes: making docker do the job.
go to docker settings > resources. change any of the resource and click apply and restart.
docker will stop itself and its every process -- even the most stubborn ones that might not be killed by other commonly used commands such as kill or more wild commands like rm suggested by others.
i ran into a similar problem before and all the good - proper - tips from my colleagues somehow did not work out. i share this safe trick whenever someone in my team asks me about this.
Error response from daemon: driver failed programming external connectivity on endpoint foobar
Bind for 0.0.0.0:8000 failed: port is already allocated
hope this helps!
simply restart your computer, so the docker service gets restarted
When trying to stop or restart a docker container I'm getting the following error message:
$ docker restart 5ba0a86f36ea
Error response from daemon: Cannot restart container 5ba0a86f36ea: [2] Container does not exist: container destroyed
Error: failed to restart containers: [5ba0a86f36ea]
But when I run
$ docker logs -f 5ba0a86f36ea
I can see the logs, so obviously the container does exist. Any ideas?
Edit:
sorry, I forgot to mention this:
When I run docker ps -a I see the container as up and running. However the application inside it is malfunctioning so I want to restart it, or just get a fresh version of that application online. But when I can't stop and remove the container, I also can't get a new application up and running, which would be listening to the same port.
I couldn't locate boot2docker in my machine. So, I came up with something that worked for me.
$ sudo systemctl restart docker.socket docker.service
$ docker rm -f <container id>
Check if it helps you as well.
All the docker:
start | restart | stop | rm --force | kill commands
may not work if the container is stuck. You can always restart the docker daemon. However, if you have other containers running, that may not be the option. What you can do is:
ps aux | grep <<container id>> | awk '{print $1 $2}'
The output contains:
<<user>><<process id>>
Then kill the process associated with the container like so:
sudo kill -9 <<process id from above command>>
That will kill the container and you can start a new container with the right image.
That looks like docker/docker/issues/12738, seen with docker 1.6 or 1.7:
Some container fail to stop properly, and the restart
We are seeing this issue a lot in our users hosts when they upgraded from 1.5.0 to 1.6.0.
After the upgrade, some containers cannot be stopped (giving 500 Server Error: Internal Server Error ("Cannot stop container xxxxx: [2] Container does not exist: container destroyed")) or forced destroyed (giving 500 Server Error: Internal Server Error ("Could not kill running container, cannot remove - [2] Container does not exist: container destroyed")).
The processes are still running on the host.
Sometimes, it works after restarting the docker daemon.
There are some workarounds:
I've tried all remote API calls for that unkillable container and here are results:
json, stats, changes, top, logs returned valid responses
stop, pause, wait, kill reported 404 (!)
After I finished with remote API, I double-checked docker ps (the container was still there), but then I retried docker kill and it worked! The container got killed and I could remove it.
Or:
What worked was to restart boot2docker on my host. Then docker rm -f
$ boot2docker stop
$ boot2docker start
$ docker rm -f 1f061139ba04
Worth knowing:
If you are running an ENTRYPOINT script ... the script will work with the shebang
#!/bin/bash -x
But will stop the container from stopping with
#!/bin/bash -xe
Enjoy
sudo aa-remove-unknown
This is what worked for me.
Check if there is any zombie process using "top" command.
docker ps | grep <<container name>>
Get the container id.
ps -ef | grep <<container id>>
ps -ef|grep defunct | grep java
And kill the container by Parent PID .
For anyone on a Mac who has Docker Desktop installed. I was able to just click the tray icon and say Restart Docker. Once it restarted was able to delete the containers.
If you're on a Mac and try this via Terminal: Use killall Docker to quit Docker.
Restart it in the Applications folder or with open /Applications/Docker.app.
Subsequently you can run a docker rm <id> for the concerned container.
I had the same problem on a windows host machine and none of the other options here worked for me. I ended up just needing to delete the physical container folder, which was located here:
C:\ProgramData\Docker\containers\[container guid]
I had stopped the docker service first just to be safe and when I restarted it, the broken containers were now gone and I was able to create new ones. I suspect the same will work on a linux host machine, but I do not know where the container folders are kept on that OS.
Ubuntu
Stop the container by using its system process ID.
Get the main process ID using:
docker inspect -f '{{.State.Pid}}' container-id
This will return an id as ´25430´.
Kill this with the command
sudo kill -9 25430
in my case, i couldn't delete container created with nomad jobs,
there's no output for the docker logs <ContainerID> and, in general, it looks like frozen.
until now the solution is: sudo service docker restart, may someone suggest better one?
i forgot that i had made the container start as a system service.
so if i stopped or killed the container, the service would bring it back.
if you are using systemctl, you can list all the running services with systemctl | grep running and find the name of the service.
then use
sudo systemctl disable <your_service_name> to stop it.
If you're on Ubuntu, make sure docker-compose isn't installed as a snap. This will cause all kinds of random issues, including the above.
Remove the snap:
sudo snap remove docker-compose
And install manually from the compose repository:
Docker compose installation instruction
Sometimes this is caused by problem of the docker daemon.
I solved the problem by restarting the docker service.
On Linux:
systemctl restart docker
In my case, docker rm $(docker ps -aq) works for me.
I run some containers with the option --restart always.
It works good, so good, that I have now difficulties to stop these containers now :)
I tried :
sudo docker stop container && sudo docker rm -f container
But the container still restarts.
The docker documentation explains the restart policies, but I didn't find anything to resolve this issue.
Just
sudo docker rm -f container
will kill the process if it is running and remove the container, in one step.
That said, I couldn't replicate the symptoms you described. If I run with --restart=always, docker stop will stop the process and it remains stopped.
I am using Docker version 1.3.1.
docker update --restart=no <container>
Many thanks for those who takes time to respond.
If you use docker directly, Bryan is right sudo docker rm -f container is enough.
My problem was mainly that I use puppet to deploy docker images and run containers. I use this module and it creates entries in /etc/init for the upstart process manager.
I think, my problem whas that, some kind of incompatibilities between the process manager and docker.
In this situation, to halt a container, simply sudo stop docker-container.
More informations on managing docker container run can be found on the docker website