I was compiling ROS2 from source on Ubuntu. I received this error,
Failed <<< osrf_testing_tools_cpp
when running the command,
colcon build --symlink-install
this is the full error
Is there any reason why I would be getting this error?
Related
I got this error while trying to compile the HAProxy 2.2 with LUA version 5.3. I'm on trying to do it on CentOS7(arm64).
[root#08d17a479616 haproxy-2.2.22]# make TARGET=linux-glibc USE_PCRE=1 USE_PCRE_JIT=1 USE_OPENSSL=1 USE_ZLIB=1 USE_LINUX_TPROXY=1 USE_REGPARM=1 USE_LUA=1 USE_THREAD=1 USE_TFO=1
CC src/version.o
LD haproxy
/usr/bin/ld: cannot find -latomic
collect2: error: ld returned 1 exit status
More logs;
attempt to open //usr/aarch64-redhat-linux/lib64/libatomic.so failed
attempt to open //usr/aarch64-redhat-linux/lib64/libatomic.a failed
attempt to open //usr/lib64/libatomic.so failed
attempt to open //usr/lib64/libatomic.a failed
attempt to open //usr/local/lib64/libatomic.so failed
attempt to open //usr/local/lib64/libatomic.a failed
attempt to open //lib64/libatomic.so failed
attempt to open //lib64/libatomic.a failed
attempt to open //usr/aarch64-redhat-linux/lib/libatomic.so failed
attempt to open //usr/aarch64-redhat-linux/lib/libatomic.a failed
attempt to open //usr/local/lib/libatomic.so failed
attempt to open //usr/local/lib/libatomic.a failed
attempt to open //lib/libatomic.so failed
attempt to open //lib/libatomic.a failed
attempt to open //usr/lib/libatomic.so failed
attempt to open //usr/lib/libatomic.a failed
ld: cannot find -latomic
[root#08d17a479616 haproxy-2.2.22]#
What I've tried until now is to create a symlink to the libatomic.so with this
ln -s /usr/lib64/libatomic.so.1.2.0 /usr/lib/libatomic.so
And installed the missing GNU library from here with the steps outline in the article.
Install CentOS SCLo RH repository:yum install centos-release-scl-rh
Install devtoolset-7-libatomic-devel rpm package:
# yum install devtoolset-7-libatomic-devel
What should I do to resolve it ?
Fixed by installing this package and it goes through to a new error, which I've outlitned in this question.
New question: New questions
To apply the fix for CentOS7 arm, use this link and the instructions on how to install the package.
Package Link
Install systemd-devel rpm package: yum install systemd-devel
please i'm trying to learn how to open a link from a kivy app
i tried urlrequests also tried installing webview but kept getting an error
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for pythonnet
Running setup.py clean for pythonnet
Failed to build pythonnet
Installing collected packages: proxy-tools, pycparser, pythonnet, pywebview
Running setup.py install for pythonnet ... error
error: subprocess-exited-with-error
× Running setup.py install for pythonnet did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: option --single-version-externally-managed not recognized
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> pythonnet
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.`enter code here`
please can someone help me out
I've been trying to install Luadist, but an error with CMake always happens and in the end it doesn't install because of it.
This seems to be a common issue on Windows 10. I've followed the instructions from https://github.com/LuaDist/Repository/wiki/LuaDist%3A-Installation and https://github.com/LuaDist/Repository/wiki/Installation-of-System-Dependencies#microsoft-windows . I've tried uninstalling it and installing it again, but it didn't work. I tried installing Lua on the same drive as LuaDist, but it still doesn't work. I think the error might be because I also have LuaRocks installed, I don't know if they are compatible together.
[ 37%] Performing configure step for 'luafilesystem'
loading initial cache file C:/Users/User/_bootstrap/_bootstrap/tmp/config.cmake
CMake Error at C:/Program Files (x86)/CMake/share/cmake-3.15/Modules/CMakeMinGWFindMake.cmake:12 (message):
sh.exe was found in your PATH, here:
C:/Program Files/Git/usr/bin/sh.exe
For MinGW make to work correctly sh.exe must NOT be in your path.
Run cmake from a shell that does not have sh.exe in your PATH.
If you want to use a UNIX shell, then use MSYS Makefiles.
Call Stack (most recent call first):
CMakeLists.txt:7 (project)
CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
-- Configuring incomplete, errors occurred!
CMakeFiles\luafilesystem.dir\build.make:106: recipe for target 'luafilesystem/src/luafilesystem-stamp/luafilesystem-configure' failed
mingw32-make.exe[3]: *** [luafilesystem/src/luafilesystem-stamp/luafilesystem-configure] Error 1
CMakeFiles\Makefile2:114: recipe for target 'CMakeFiles/luafilesystem.dir/all' failed
mingw32-make.exe[2]: *** [CMakeFiles/luafilesystem.dir/all] Error 2
CMakeFiles\Makefile2:175: recipe for target 'CMakeFiles/install.dir/rule' failed
mingw32-make.exe[1]: *** [CMakeFiles/install.dir/rule] Error 2
Makefile:156: recipe for target 'install' failed
mingw32-make.exe: *** [install] Error 2
## Bootstrap done, building LuaDist using LuaDist
'C:\Users\User\_bootstrap\_bootstrap\bin\luadist.exe' is not recognized as an internal or external command,
operable program or batch file.
## LuaDist is now built and can be found in C:\Users\User\_bootstrap\_install
At the end it says that LuaDist is built in C:\Users\User_bootstrap_intall , but that folder doens't exist after the installation.
I'm having a problem with Building TF Hub from Source. Can Anyone please help me out? I've been following the steps as given in https://github.com/tensorflow/hub/blob/master/tensorflow_hub/pip_package/PIP.md
I've installed bazel 0.24.1.
Error I'm Getting:
ERROR: /home/tf_hub/hub/WORKSPACE:17:1: name 'git_repository' is not defined
ERROR: /home/tf_hub/hub/WORKSPACE:40:1: name 'http_archive' is not defined
ERROR: /home/tf_hub/hub/WORKSPACE:47:1: name 'new_http_archive' is not defined
ERROR: Error evaluating WORKSPACE file
ERROR: error loading package '': Encountered error while reading extension file 'tools/build_defs/repo/http.bzl': no such package '#bazel_tools//tools/build_defs/repo': error loading package 'external': Could not load //external package
ERROR: error loading package '': Encountered error while reading extension file 'tools/build_defs/repo/http.bzl': no such package '#bazel_tools//tools/build_defs/repo': error loading package 'external': Could not load //external package
INFO: Elapsed time: 2.552s
INFO: 0 processes.
FAILED: Build did NOT complete successfully (0 packages loaded)
Bazel Version: 0.24.1
Python Version: 3
Tensorflow Version: 2.0.0a
Commands to Reproduce:
(env)~/tf_hub$ git clone https://github.com/tensorflow/hub
(env)~/tf_hub$ cd hub && bazel build tensorflow_hub/pip_package:build_pip_package
Expected Output: No Error. Build Sucessful
Latest Versions of Bazel Doesn't support git_repository (which is still used by tensorflow_hub), so Uninstalling Bazel 0.24.1 and installing Bazel 0.18.1 worked.
I am trying to compile OpenCV with Cuda support using Microsoft Visual Studio 2013 and get the following compilation error message:
22> CMake Error at cuda_compile_generated_pyrlk.cu.obj.cmake:264 (message):
22> Error generating file
22> F:/Nir/dev/opencv/build/visualStudioA/modules/cudaoptflow/CMakeFiles/cuda_compile.dir/src/cuda/Debug/cuda_compile_generated_pyrlk.cu.obj
22>
22>
22>C:\Program Files\MSBuild\Microsoft.Cpp\v4.0\V120\Microsoft.CppCommon.targets(170,5): error MSB6006: "cmd.exe" exited with code 1.
Is there a way to get more information about the error?
Increasing log verbosity, or getting the nvcc command that failed could be useful
Cuda compile verbosity can be enabled at CMakeCache.txt file:
//Print out the commands run while compiling the CUDA source file.
// With the Makefile generator this defaults to VERBOSE variable
// specified on the command line, but can be forced on with this
// option.
CUDA_VERBOSE_BUILD:BOOL=ON