Bitbucket Server Webhook does not trigger Jenkins Pipeline - jenkins

I have a Jenkins Pipeline that is connected to a Bitbucket Server Repo.
The pipeline is configured with the Bitbucket Jenkins Plugin (version: 223.vd12f2bca5430) and is inside a Docker Container (PORT 8000).
To connect to the Bitbucket Server I have to use a VPN.
I have followed multiple tutorials and articles and failed. This seems a recurrent problem since I have seen multiple questions about this.
When I build the pipeline manually it works fine. It clones the repository and starts the building process but I cannot make the webhook trigger the building process.
Below you can see the configuration.
Jenkins System Settings - Successfull Connection
Pipeline Configuration (Build Triggers)
Pipeline Configuration (Pipeline - Successfull Connection)
When I run the pipeline manually for the first time, the webhook is created in the repository with the following URL: http://localhost:8080/bitbucket-server-webhook/trigger
But when I test the Webhook, it fails everytime a returns the following message:
Unable to connect to the URL specified within the timeout, please check the host and port are correct and that the URL is accessible from the server running this request.
Webhook Config inside Bitbucket Server (Test Fail)
Is this a problem with my Bitbucket Server?
Thank you for your time.

Related

Jenkins does not run the building process after a push

I have the following initial situation:
I have a Docker container running Jenkins 2.379
This Jenkins has the Bitbucket Server Integration and the Bitbucket Branch Sourch Plugin installed
The connection to the Bitbucket server seems to work
I also set up a multibranch pipeline that listens to the repository in the connected Bitbucket server instance
And I have set the Scan Multibranch Pipeline Trigger to All pushes.
Finally, it seems that Jenkins has correctly implemented the webhook in the corresponding Bitbucket project.
Changes to some configurations of the multibranch pipeline trigger the scan process, which works properly. If there are changes in the code of the corresponding branch during a push, the build is triggered.
Clicking the "Scan Multibranch Pipeline Now" button has the same result.
But if I just push some code changes into a branch, nothing happens. My pipeline does not start automatically and no build process is started with the changes made.
Goal: Every push a developer does in a branch of this project should trigger the scan for new branches in Jenkis and the build process for new branches or those where something has changed.
I have found the problem/solution. As I said, my Jenkins runs in a Docker container and is hosted locally on my PC (localhost:8080).
Through the credentials, the path from Jenkins into Bitbucket worked and so did creating the webhook. However, for this webhook, the Bitbucket server plugin entered its address (localhost:8080). So now when a push into a Bitbucket repo happens, this webhook was triggered on Bitbucket's localhost:8080 (so presumably Bitbucket itself and not Jenkins).
The solution was now quite simple. I used a tool called ngrok to make my localhost:8080 (on which Jenkins runs) accessible via a URL from the internet.
I then only had to store this URL in Jenkis in system configurations and adapt the webhook in my Bitbucket repository.

Trigger JMeter tests on a remote system via Jenkins

how can we tell Jenkins to download and run JMeter tests on a remote system rather than from the Jenkins server itself?
My requirement is to create a job in Jenkins to download the latest code from a repo to another system where JMeter is installed and run the JMeter tests on that remote system rather than from Jenkins server itself? I can trigger the tests from Jenkins server itself but unable to connect to remote server and download/trigger the server.
You need to get familiarized with the concept of Jenkins Distributed Builds, it's enough to start Jenkins agent proces on the "remote system" and bind your job to execute on that agent instead of Jenkins master.
With regards to tracking changes in the remote repo check out Generic Webhook Trigger and How to Integrate Your GitHub Repository to Your Jenkins Project articles

Trigger Jenkins Multi-Branch Pipeline from GitLab push

I run a Gitlab and a Jenkins server locally. I connected those two using the gitlab-branch-source plugin. For every repository in gitlab i create a multibranch-pipeline job in jenkins. When a user pushes code, I want the corresponding job to be executed.
I'v tried a solution suggestend in this post and this one. Both of them don't seem to work.
In the gitlab server settings on the jenkins server I've set the check at "Manage Web Hooks". The personal access token which is used for the integration has the scopes "api, sudo".
What else could I try?

BitBucket Webhook - Unable to connect to Jenkins URL

I am trying to create a webhook in BitBucket to trigger a build in Jenkins, but when I enter my Jenkins URL, and I test the connection, I get the error "Unable to connect to the URL specified, check the host and port are correct." I am using the URL http://localhost:8080/bitbucket-hook/ (with the last back slash included) and I can confirm that in Jenkins, my "Jenkins URL" is set to http://localhost:8080/. In Jenkins, I have installed the plugin "BitBucket Server Integration", and under Configure System -> Bitbucket Server Integration, I have connected to the Bitbucket server (and when I test the connection, it says "Jenkins can connect with the Bitbucket Server", so I am pretty sure Jenkins is configured correctly). I don't have credentials set up in Jenkins for the Bitbucket Server configuration, is this necessary even though when I test the connection, it seems to be able to connect? Is my url for the BitBucket webhook correct?? Is there anything else you can think of that I might not have configured correctly so when I test the connection on BitBucket, it will connect properly?
I just ran through a similar setup, to answer to your questions:
yes, I think you will have to use credentials of a user having admin permissions on the repository upon which you want to create the webhook.
Read below, anyway the Webhook URL I got is in the form < jenkins-url >/bitbucket-server-webhook/trigger
The pipeline
According to my experience, the creation of the Webhook is demanded to Jenkins, you don't have to do anything on your own other than creating a new Pipeline object.
Having set the Bitbucket Server Integration configuration up in fact is not enough for the creation of the Webhook, to do that you have to
create a new Pipeline
flag the Build Trigger "Bitbucket Server trigger build after push"
in the Pipeline section, use as Definition "Pipeline Script from SCM" and fill the other fields according to the configuration you have set before.
Point 3 is saying you are retrieving your Pipeline definition from a file stored in Bitbucket itself, you can also customise the name of the file Jenkins is going to look for (by default this should be Jenkinsfile), and use the "Pipeline Syntax" option to get the snippet of code you will use as step in your Jenkinsfile.
Once you have created your Pipeline in Jenkins, the webhook should appear in the right section in your Bitbucket Server repository.

integrating gitlab with jenkins using webhooks does not work

I am trying to trigger jenkins pipeline on gitlab push to branch and tag.
Using Jenkins ver. 2.176.2 and gitlab version 10.7.3-ee.
Although I have supposedly set up the webhooks properly, I do not see the jenkins job being triggered.
I have installed the gitlab plugin for jenkins, and configured the gitlab server, including the Personal Access Token for GitLab APIs access generated in gitlab.
I have defined the webhook (currently requesting trigger on all events). (for testing, ssl verification is off).
When testing the webhook in gitlab, I consistently receive HTTP error 500.
In jenkins pipeline job, I have selected "build when change is pushed to gitlab. gitlab webhook..." - this is the URL I used when defining the webhook in gitlab, under "integrations" section.
When pushing to gitlab, I see no event listed under "integrations -> recent deliveries",
I see no log under jenkins logs "com.dabsquared.gitlabjenkins" logger (set to log level "FINEST".
And lastly, the pipeline job is not triggered as I expected.
Any leads will be very helpful.
Adding printscreen of the Jenkins configuration of the gitlab for reference to the comment I added on possibility this is issue with the personal access token
Jenkins gitlab server configuration
Go to Settings of Gitlab Project -> Integrations and type in the Jenkins Job project url in 'URL'. URL should take either form:
http://JENKINS_URL/project/PROJECT_NAME
http://JENKINS_URL/project/FOLDER/PROJECT_NAME
Notice that the url does not contain "job" within it and instead uses "project".
Make sure under Triggers, you have "Push Events" checked as well if you want the job to trigger whenever someone pushes a commit.
Finally, run a build against your Jenkinsfile first before testing the webhook so Jenkins will pick-up the trigger settings for Gitlab.
Please refer the link for more details.

Resources