I alternately use 2 different label type and size, I have a zd421 Zebra Printer and when changing the labels it execute the media calibration automaticly to the rigth size of label, but it prints 3-5 blank label each time we change paper, is there any possibility to disable printing extra blank label during calibration? is it possible to disable the media calibration? I apreciate you could help me.
If your printer has a display, you can change this in the tools ("power up action" and "head close action") menu otherwise you can use the ^MF ZPL command.
Have a look here to see how you can set the automatic action when you close the printer lid and when you power on the printer and here you can see how to send the commands to the printer.
But in few words, if you want to disable the calibration at all, you've to send the following commands
^XA
^MFN,N
~JUS
^XZ
Related
I apologize for the long title, but that is exactly what I am trying to achieve.
I'll try to explain more briefly here:
So I have a Zebra ZT610 with a scanner that checks every single label as they are printed. The problem is that we're trying to print labels solely, not in batch, and the issue with that is that the printed label will always be in a position where an operator will not be able to take the label without destroying it. The issue with this is it will become a waste of labels and ribbons if this process remains as is.
How it is now (it is not really in production, but to give you an imagination):
Operator clicks on print
Zebra prints a label (and the scanner checks the label simultaneously)
Operator feeds a label (in order to take the label without destroying it)
Operator takes the label
Repeat the process
That is the issue, in theory we would have to waste HALF of the amount of available labels (assuming that all printed labels passed the inspection) in order to finish the job, which is definitely absurd and no one in the world would do this hahah
What we're trying to achieve:
Operator clicks on print
Zebra prints a label (and the scanner checks the label simultaneously)
The printer feeds a label automatically (or maybe half of a label at least for the printed label to be taken without any issue or destroying it)
Operator takes the label
Operator prints another label
Printer backfeeds the latest fed label
Printer prints on the backfed label
Continue on from step 3, and so on.
I searched for anything related to this and all what i found was this:
^XA
^FD
^XZ
All it basically those is "print" a space on a label, thus technically feeding a label. But i was never able to get that label to go back inside the printer.
Thank you for reading this far.
EDIT:
We have also tried this:
Went into the printers settings via its IP address and login
Click on 'View and Modify Printer Settings'
Click on 'General Setup'
Below you will find 'Tear Off Adjust', we've set it to the maximum (120) but that was not enough, it is still too far inside.
But i hope the solution above helps other people out there.
Take a look at the ~JS command - Change Backfeed Sequence. By overriding the default backfeed, you can force the label media to feed forward after printing, then retract on the next print.
Not knowing how much backfeed you will need, start with 50% (~JS50) and adjust from there.
fist off, if there is an exchange place more suitable for the question, please address me.
I'm designing some labels in gimp.
I created a A4 300dpi document and created the artwork, arranged them to use all the page. To measure the labels I create a rectangle with the "rectangle selection tool" and there one can inspect the size in cm:
I printed straight from gimp and to my surprise, the printed labels where smaller than designed. I assumed somehow someone along the line added margins to my already A4 document..
I tried saving to PDF and then printing the PDF, very similar results.
I'd say the difference is around 5%
What would be the appropriated method for printing exactly at the size I created the document ignoring any margins ??
I'm using Windows 10, HP ENVY 5010 and Gimp 2.10
I have to print a report directly on a thermal printer POS58 and I am using FortesReport 4.0 and Delphi XE6.
How to print all the content on a single page, whose height increases according to the content (without generating more than one page)? TRLReport has a property for this?
Just use a typical paper size(letter) and set it margins(top and bottom) to 0. Print that directly to the thermal paper, no special calls needed.
I am trying to allow the user to select an appropriate paper size for their printer within my own print settings dialog. Does anyone know a workable solution - preferably cross platform but otherwise OSX.
If I use a TPageSetupDialog then when executed it produces an error in the PASever window of Invalidpmobject although the dialog shows but doesn't seem to affect the current printers paper size. There doesn't seem to be any proerties to see what the user selected either.
I need to set the paper size without actually printing as the user needs to be able to adjust things with the new paper size first.
I finally figured out the problem so here is the solution for anyone else with the problem:
Use TPageSetupDialog but you must set valid pagewidth and pageheight values for the current printer before calling it - otherwise you get an error reported in PAServer window and the printer selection box will be set to "any printer" instead of the current printer name.
Unfortunately you cannot derive the paper size directly from the printer pagewidth and resolution because it reports printable area not paper size. So I set a default of A4 whenever the user chooses another printer. I guess you could set the nearest standard paper size to the calculated value from printer.pagewidth/printer.activeprinter.activedpi.x if you want to take care of printers that do not support A4.
The other point to note is that the default page sizes in the TPageSetupDialog component are wrong. Set the units to mm and use width 210000 and height 297000 (note 10 times bigger than the default values) for A4 size that most printers should support.
This is the first time I've worked with ZPL code. I'm printing on a 200dpi ZP450ctp printer onto labels that are 2inx1in. The .zpl below is way to big but I thought I had it set right. Is anyone familiar with the .zpl language?
^XA~TA000~JSN^LT0^MNW^MTT^PON^PMN^LH0,0^JMA^PR2,2~SD15^JUS^LRN^CI0^XZ
^XA
^MMT
^PW1200
^LL0600
^LS0
^FT131,350^A0N,333,331^FH\^FDA12345^FS
^BY4,3,70^FT717,533^BCN,,Y,N
^FD>:A>51234>65^FS
^FT138,539^A0N,58,57^FH\^FDThis is a description^FS
^PQ1,0,1,Y^XZ
To start with your print width would then be 400 and label length would be 100. If you are using web based media you do not need to have these in your ZPL (remove the ^PW and ^LL).
Then you need to set the values right. Character height and with in your ^A0 command would make each character 1.5 inches.
^XA
^MMT
^FO10,10^A0N,80,80^FH\^FDA12345^FS
^BY4,3,50^FO10,130^BCN,,Y,N
^FD>:A>51234>65^FS
^FO10,95^A0N,30,30^FH\^FDThis is a description^FS
^XZ
Try the above it should get you closer to what you need. You want to adjust the ^FO commands to adjust the location of the objects, and adjust the pair of numbers after the ^AON, to adjust the font size.