I’m trying to write a custom plugin to transform response body. I could’ve used a response transformer plugin, but my response body json is complex, so I want to remove few fields from it.
I tried using post-function plugin to write my custom lua code but it doesn’t let me import cjson, so I’m unable to decode the response and remove specific keys from it.
My lua code in body_filter:
local cjson = require(“cjson”)
local body = cjson.decode(kong.response.get_raw_body())
-- set custom key’s value to 1
body.subKeyFoo.subSubKey = 1;
This is what I get:
require cjson not allowed within sandbox “kong”
The sandbox is enabled, this is to protect arbitrary Lua code from doing dangerous things. See the docs on how to disable the sandbox. Link: https://docs.konghq.com/gateway/latest/reference/configuration/#untrusted_lua check untrusted_lua_xxx options (3 in total)
Related
I’m sure this is not a unique question about Lua 5.1 (especially an embedded instance, where you can’t install modules, your only options is pure Lua files/reference, therefore I can’t install something like luacurl ). I’ve seen this matter referred to in various SO places, and tried them, but I can’t seem to find a fix to make an https file download request work in this particular Lua environment..
To give you an example, the code below aims to download 2 different files, the http call works fine, returning a 200 code, but the https one doesn’t, it doesn’t return anything ?
Both targets can be access directly via the browser..
Please could some highlight what I’m missing in the https call to make it work?
print("--------DOWNLOAD http---------")
local http = require("socket.http")
local body, code = http.request("http://pbs.twimg.com/media/CCROQ8vUEAEgFke.jpg")
print(code)
if not body then error(code) end
local f = assert(io.open('mnt/nas/webtest1.jpg', 'wb')) -- open in "binary" mode
f:write(body)
f:close()
print("--------DOWNLOAD https---------")
local https = require "ssl.https" --luasec
local body, code = https.request("https://u.cubeupload.com/jbcooper/16146313918060.jpg")
print(code)
if not body then error(code) end
local f = assert(io.open('mnt/nas/webtest2.jpg', 'wb')) -- open in "binary" mode
f:write(body)
f:close()
As requested, the following returns nothing at all..
local https = require "ssl.https" --luasec
print(https.request("https://u.cubeupload.com/jbcooper/16146313918060.jpg"))
If it helps, if I run the following it returns 0.4
local https = require("ssl.https")
local httpsVersion = string.sub(https._VERSION,1,3)
print (httpsVersion)
I am trying to localize a push notification text while inside a Parse Cloud function and after many tries I was not able to have working solution. Is there a way to localized text inside a Parse Server cloud function?
So, for anyone looking for a solution, I used the following library: i18n-node.
Then in the cloud code (I am using Typescript):
import i18n from 'i18n';
//... other imports
i18n.configure({
locales:['en', 'it'],
directory: __dirname + '/locales'
});
And then inside a cloud function is possible to run:
i18n.__({phrase: "Hey, well done!", locale: locale}
Where locale can come from the request or, in my case, from the user's device language preference.
I had the same problem, and solve it with UTF-8 encoding before sending the notification.
npm package: UTF8
Usage:
var utf8 = require("utf8");
// encode before sending the text
text = utf8.encode(text);
First thing I have to mention is I'm really really new to Lua and please be patient if you think my question is too dumb
Here is my requirement
I need to use HMAC-sha256 for Lightroom plugin development as I'm using that for security.
I was trying to use this but with no luck
https://code.google.com/p/lua-files/wiki/hmac
These are the steps I followed
Got the code of
https://code.google.com/p/lua-files/source/browse/hmac.lua and saved
as 'hmac.lua' file in my plugin directory
Got the code from this
https://code.google.com/p/lua-files/source/browse/sha2.lua and saved
as 'sha2.lua' file
Now in the file I use it like this
local hmac = require'hmac'
local sha2 = require'sha2'
--somewhere doend the line inside a function
local hashvalue = hmac.sha2('key', 'message')
but unfortunately this does not work and I'm not sure what I'm doing wrong.
Can anyone advice me what I'm doing wrong here? Or is there an easier and better way of doing this with a good example.
EDIT:
I'm doing this to get the result. When I include that code the plugin does stops working. I cannot get the output string when I do this
hashvalue = hmac.sha2('key', 'message')
local LrLogger = import 'LrLogger'
myLogger = LrLogger('FlaggedFiles')
myLogger:enable("logfile")
myLogger:trace ("=========================================\n")
myLogger:trace ('Winter is coming, ' .. hashvalue)
myLogger:trace ("=========================================\n")
and the Lightroom refuses to load the plugin and there is nothing on the log as well
Thank you very much for your help
I'd first make sure your code works outside of Lightroom. It seems that HMAC module you referenced has some other dependencies: it requires "glue", "bit", and "ffi" modules. Of these, bit and ffi are binary modules and I'm not sure you will be able to load them into Lightroom (unless they are already available there). In any case, you probably won't be able to make it run in LR if you don't have required modules and can't make it run without issues outside of LR.
If you just need to get SHA256 hash there is a way to do it Lightroom
I posted my question here and was able to get an answer. But there there was no reference of this on SDK documentation (Lightroom SDK)
local sha = import 'LrDigest'
d = sha.SHA256.digest ("Hello world")
but unfortunately there was no HMAC so I decided to use md5 with a salt because this was taking too much of my time
Spent quite some time trying to find a solution :-/
LrDigest is not documented, thanks Adobe!
Solution:
local LrDigest = import "LrDigest"
LrDigest.HMAC.digest(string, 'SHA256', key)
I'm new with lua but working on an application that works on specific files with given path. Now, I want to work on files that I download. Is there any lua libraries or line of codes that I can use for downloading and storing it on my computer ?
You can use the LuaSocket library and its http.request function to download using HTTP from an URL.
The function has two flavors:
Simple call: http.request('http://stackoverflow.com')
Advanced call: http.request { url = 'http://stackoverflow.com', ... }
The simple call returns 4 values - the entire content of the URL in a string, HTTP response code, headers and response line. You can then save the content to a file using the io library.
The advanced call allows you to set several parameters like HTTP method and headers. An important parameter is sink. It represents a LTN12-style sink. For storing to file, you can use sink.file:
local file = ltn12.sink.file(io.open('stackoverflow', 'w'))
http.request {
url = 'http://stackoverflow.com',
sink = file,
}
Can someone recommend a load testing tool which allows you to either:
a. replay an IIS (7) log(s) to simulate a real live site daily run;
b. import a CSV or equivalent list of URLS so we can achieve a similar thing as above but at a URL level;
c. .net API so I can create simple tests easily from my list of URLS is also a good way to go.
I do not really want to record my tests.
I think I can do B) with WAPT but need to create an XML file manually, not too much grief, but wondering if any tools cover these scenarios out the box.
Visual Studio Test Edition would require some code to parse the file into a suitable test run.
It is a great load testing solution.
Our load testing service lets you write a very simple script using JavaScript to pull data out of a CSV file and then fetch those URLs. For example, the following code would pluck 10 random URLs from the CSV file and fetch them as part of a single session:
var c = browserMob.openHttpClient();
var csv = browserMob.getCSV("urls.csv");
browserMob.beginTransaction();
for (var i = 0; i < 10; i++) {
browserMob.beginStep("Step 1");
var url = csv.random().get("url");
c.get(url);
browserMob.endStep();
}
browserMob.endTransaction();
The CSV file itself needs to be a normal CSV file with the first row containing a header named "url". This script would be run repeatedly for each virtual user participating in a load test.
We have support for so called 'uri-format' in our open-source tool called Yandex.Tank You simply put all your uris to a file, one uri -- one line, then specify headers in your load.ini like this:
[phantom]
address=example.org
rps_schedule=line(1, 1600, 2m)
headers = [Host: mts-maps.yandex.ru]
[Connection: close] [Bloody: yes]
ammo_file = ammo.uri
ammo.uri:
/
/index.html
/1/example.html
/2/example.html