For example, over 4000 events per day should have an email notification.
If you are using Open Distro, where no CCS is being used and want to create an email notification for over 4000 events in a day, find below the high level steps:
Click on Alerting on the left menu
Click on Destinations tab and Add destination, this will be an Email as a destination, enter a valid email and the smtp configuration under Manage Senders, then select it under Sender, add a recipient email under Recipients
Create a Monitor: Under Method of definition you can select Define using visual graph, under Index enter wazuh-alerts* (this will select all events that you visualize under Wazuh>Modules>Security Events), under Time field you can select #timestamp. Leave the WHEN Count(), OVER all documents and WHERE all fields are included as default, in option FOR THE LAST … select for the last 24 hours. Finally select the frequency under Monitor Schedule as Daily and the time when you want this to run, alternatively you can select By interval and run it Every 1 Days, click on Create
With the Monitor created you will have to create a trigger, in trigger condition enter IS ABOVE 4,000. Under Configure actions select the Destination created in step 2, then the Message subject you would like the recipient to receive and you can leave the Message by default, it uses Mustache if you would like to edit it, you can send a test message to check if the Destination and smtp is configured correctly. Click on Create
Last step is to enable your monitor in case it was not enabled when created, select it from Monitors tab and click on Actions>Enable
I hope you are able to configure it, let me know!
Related
I have a requirement that states to have a Menu Screen containing 10 options and user can select a option and jump to appropriate screen.I have created a Trans-ID for Menu Screen.Do i need to create Trans-ID for all the 10 options?.I have searched for this type of Requirement and all of them involves creating the Trans-ID for each sub screen so that the screen can be refreshed and return to same screen until user selects to go back to main-screen.
I am new to CICS-COBOL Programming and not sure why we need to create Trans-ID for each screen.Is this the global format or is there any other approach available?
No, you don't need to use a tranid per screen/function in this scenario. You could actually use one transid and even one program in a pseudoconversational style.
You would use a commarea to hold the state of the interaction with the user at the terminal, so when the user picks an option and the next 'leg' of the pseudoconversation invokes the transaction and program again, you can determine in that program what has just been received from the terminal, what to do with it and what response to send back to the terminal. This process simply repeats until the business function completes and you can end with the default menu again.
I have a trigger with:
PROBLEM event generation mode: Multiple
OK event closes: All problems
That trigger fires at the expression for the trapper item, which's updated by the crontab multiple times a day. Every time trapper gets a new value, it should be reported by the alert (cause' every time it gets a different value, which is important). But when it's OK, one message should be enough.
Action has "Send message to user groups" operation with a single step, "Immediately" start option and "Default" step duration (3600s).
Recovery operation set to "Send message to user groups" option.
Action also has only folowing conditions in the drop-down:
Application
Host
Host group
Maintenance status
Tag
Tag value
Template
Time period
Trigger
Trigger name
Trigger severity
What may be the reason for multiple duplicating alert messages with OK status, coming at the same moment from the same trigger (and the same alert)?
Have you tried global event correlation ?
It is possible to correlate events created by completely different
triggers and apply the same operations to them all. By creating
intelligent correlation rules it is actually possible to save yourself
from thousands of repetitive notifications and focus on root causes of
a problem!
https://www.zabbix.com/documentation/3.4/manual/config/event_correlation/global
I have multiple buttons "Buy Now" on a homepage. All the "Buy Now" buttons takes the user to "same" next page (product details)
I don't have any dataLayer on the page so I am using CSS selectors to trigger Adobe Analytics event.
I am using 'show' (not click) and fire adobe analytics "event 1". So multiple time we are firing "event 1" as there are multiple buttons.
Is there anyway I can serialize the event? e.g. pass event1:1234. Do I just create a timestamp or? what are my options to count it as a single event per pageview?
I think this is what you're looking for: https://marketing.adobe.com/resources/help/en_US/sc/implement/event_serialization_impl.html
Here is an excerpt :
To use Event serialization, you must first enable it in Admin >
Report Suite > [select report suite] > Edit Settings > Success
Events. Then select which events you want recorded in the Unique
Event Recording column. There are three different settings an event
can be set to.
Always record event: This is the default behavior of all events when
initially enabled. All events included in image requests will be sent
directly to Analytics, including page reloads.
Record once per visit: An event with this setting enabled will only
track the first instance of that event in a given visit. Once a new
visit starts, each event with this setting enabled can be tracked
again. This is an effective way to mitigate duplicate events via
browser refreshes.
Use event ID: This setting allows the capability to associate each
event with a unique ID. If Analytics sees an eventID it has already
seen before with that variable, it will not be counted in reporting.
Alternatively, we use the appendList plugin which makes this completely painless. Ensuring a non-duplicate event is as simple as this:
s.events = s.apl(s.events, "event999", ",", 1);
Here is a link to that plugin: https://marketing.adobe.com/resources/help/en_US/sc/implement/appendList.html
I have a few (~20) reviews in "Incoming reviews" section, and I would like to either move or filter out those that I did "Code-review" +2 or +1 myself. Preferably move to the other section "approved incoming reviews" or other comparable solution. Currently gerrit grays out subjects you approve, but it also grays out any other projects you post some comments. So it does not filter those efficiently, and you have to revisit every project. That is time waste.
I have tried to remove myself from the project after the approval, but such action removes approval as well.
Is it even possible?
A suggestion:
1) Click on YOUR-NAME > Settings
2) Click on Preferences
3) In My Menu add the following:
Name = Review (or other name you want)
URL = #/q/reviewer:self+status:open+label:Code-Review=0%2Cuser=self
4) Click on Save Changes
Now if you click on the new menu item: My > Review you will see all open changes you're a reviewer but don't have voted yet.
I need help creating a "Submit Feedback" Button that essentially, would email the admin the text of the feedback the user submits. If I can do this with a workflow, I would prefer that. However, if we need to create a SuiteScript, that's OK.
I need to know how to get the button to stay on the task at all times so the user can always see it no matter what. Moreover, I then need to have the feedback sent to the admin via email. Thanks for the help everyone!
Workflow: Event Definition>On Create and On View or Update (to make sure the button always appears)
State 1: Action > Add Button (Trigger on Before Record Load)
State 2: Action > Send Email Transition: From > State 1, To > State 2, Execute On Button > Choose button created in State 1
Once you have set all the required fields for these steps, this should work. Let me know if you need anything clarified.