Related
By default, if I issue command:
sudo docker pull ruby:2.2.1
it will pull from the docker.io offical site by default.
Pulling repository docker.io/library/ruby
How do I change it to my private registry. That means if I issue
sudo docker pull ruby:2.2.1
it will pull from my own private registry, the output is something like:
Pulling repository my_private.registry:port/library/ruby
UPDATE: Following your comment, it is not currently possible to change the default registry, see this issue for more info.
You should be able to do this, substituting the host and port to your own:
docker pull localhost:5000/registry-demo
If the server is remote/has auth you may need to log into the server with:
docker login https://<YOUR-DOMAIN>:8080
Then running:
docker pull <YOUR-DOMAIN>:8080/test-image
There is the use case of a mirror of Docker Hub (such as Artifactory or a custom one), which I haven't seen mentioned here. This is one of the most valid cases where changing the default registry is needed.
Luckily, Docker (at least version 19.03.3) allows you to set a mirror (tested in Docker CE). I don't know if this will work with additional images pushed to that mirror that aren't on Docker Hub, but I do know it will use the mirror instead. Docker documentation: https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon.
Essentially, you need to add "registry-mirrors": [] to the /etc/docker/daemon.json configuration file. So if you have a mirror hosted at https://my-docker-repo.my.company.com, your /etc/docker/daemon.json should contain:
{
"registry-mirrors": ["https://my-docker-repo-mirror.my.company.com"]
}
Afterwards, restart the Docker daemon. Now if you do a docker pull postgres:12, Docker should fetch the image from the mirror instead of directly from Docker Hub. This is much better than prepending all images with my-docker-repo.my.company.com
It turns out this is actually possible, but not using the genuine Docker CE or EE version.
You can either use Red Hat's fork of docker with the '--add-registry' flag or you can build docker from source yourself with registry/config.go modified to use your own hard-coded default registry namespace/index.
The short answer to this is you don't, or at least you really shouldn't.
Yes, there are some container runtimes that allow you to change the default namespace, specifically those from RedHat. However, RedHat now regrets this functionality and discourages customers from using it. Docker has also refused to support this.
The reason this is so problematic is because is results in an ambiguous namespace of images. The same command run on two different machines could pull different images depending on what registry they are configured to use. Since compose files, helm templates, and other ways of running containers are shared between machines, this actually introduces a security vulnerability.
An attacker could squat on well known image names in registries other than Docker Hub with the hopes that a user may change their default configuration and accidentally run their image instead of the one from Hub. It would be trivial to create a fork of a tool like Jenkins, push the image to other registries, but with some code that sends all the credentials loaded into Jenkins out to an attacker server. We've even seen this causing security vulnerability reports this year for other package managers like PyPI, NPM, and RubyGems.
Instead, the direction of container runtimes like containerd is to make all image names fully qualified, removing the Docker Hub automatic expansion (tooling on top of containerd like Docker still apply the default expansion, so I doubt this is going away any time soon, if ever).
Docker does allow you to define registry mirrors for Docker Hub that it will query first before querying Hub, however this assumes everything is still within the same namespace and the mirror is just a copy of upstream images, not a different namespace of images. The TL;DR on how to set that up is the following in the /etc/docker/daemon.json and then systemctl reload docker:
{
"registry-mirrors": ["https://<my-docker-mirror-host>"]
}
For most, this is a non-issue (this issue to me is the docker engine doesn't have an option to mirror non-Hub registries). The image name is defined in a configuration file, or a script, and so typing it once in that file is easy enough. And with tooling like compose files and Helm templates, the registry can be turned into a variable to allow organizations to explicitly pull images for their deploy from a configurable registry name.
if you are using the fedora distro, you can change the file
/etc/containers/registries.conf
Adding domain docker.io
Docker official position is explained in issue #11815 :
Issue 11815: Allow to specify default registries used in pull command
Resolution:
Like pointed out earlier (#11815), this would fragment the namespace, and hurt the community pretty badly, making dockerfiles no longer portable.
[the Maintainer] will close this for this reason.
Red Hat had a specific implementation that allowed it (see anwser, but it was refused by Docker upstream projet). It relied on --add-registry argument, which was set in /etc/containers/registries.conf on RHEL/CentOS 7.
EDIT:
Actually, Docker supports registry mirrors (also known as "Run a Registry as a pull-through cache").
https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon
It seems it won't be supported due to the fragmentation it would create within the community (i.e. two users would get different images pulling ubuntu:latest). You simply have to add the host in front of the image name. See this github issue to join the discussion.
(Note, this is not intended as an opinionated comment, just a very short summary of the discussion that can be followed in the mentioned github issue.)
I tried to add the following options in the /etc/docker/daemon.json.
(I used CentOS7)
"add-registry": ["192.168.100.100:5001"],
"block-registry": ["docker.io"],
after that, restarted docker daemon.
And it's working without docker.io.
I hope this someone will be helpful.
Earlier this could be achieved using DOCKER_OPTS in the /etc/default/docker config file which worked on Ubuntu 14:04 and had some issues on Ubuntu 15:04. Not sure if this has been fixed.
The below line needs to go into the file /etc/default/docker on the host which runs the docker daemon. The change points to the private registry is installed in your local network. Note: you would require to restart the docker service followed with this change.
DOCKER_OPTS="--insecure-registry <priv registry hostname/ip>:<port>"
I'm adding up to the original answer given by Guy which is still valid today (soon 2020).
Overriding the default docker registry, like you would do with maven, is actually not a good practice.
When using maven, you pull artifacts from Maven Central Repository through your local repository management system that will act as a proxy. These artifacts are plain, raw libs (jars) and it is quite unlikely that you will push jars with the same name.
On the other hand, docker images are fully operational, runnable, environments, and it makes total sens to pull an image from the Docker Hub, modify it and push this image in your local registry management system with the same name, because it is exactly what its name says it is, just in your enterprise context. In this case, the only distinction between the two images would precisely be its path!!
Therefore the need to set the following rule: the prefix of an image indicates its origin; by default if an image does not have a prefix, it is pulled from Docker Hub.
Didn't see the answer for MacOS, so want to add here:
2 Method as below:
Option 1 (Through Docker Desktop GUI):
Preference -> Docker Engine -> Edit file -> Apply and Restart
Option 2:
Directly edit the file ~/.docker/daemon.json
Haven't tried, but maybe hijacking the DNS resolution process by adding a line in /etc/hosts for hub.docker.com or something similar (docker.io?) could work?
By default, if I issue command:
sudo docker pull ruby:2.2.1
it will pull from the docker.io offical site by default.
Pulling repository docker.io/library/ruby
How do I change it to my private registry. That means if I issue
sudo docker pull ruby:2.2.1
it will pull from my own private registry, the output is something like:
Pulling repository my_private.registry:port/library/ruby
UPDATE: Following your comment, it is not currently possible to change the default registry, see this issue for more info.
You should be able to do this, substituting the host and port to your own:
docker pull localhost:5000/registry-demo
If the server is remote/has auth you may need to log into the server with:
docker login https://<YOUR-DOMAIN>:8080
Then running:
docker pull <YOUR-DOMAIN>:8080/test-image
There is the use case of a mirror of Docker Hub (such as Artifactory or a custom one), which I haven't seen mentioned here. This is one of the most valid cases where changing the default registry is needed.
Luckily, Docker (at least version 19.03.3) allows you to set a mirror (tested in Docker CE). I don't know if this will work with additional images pushed to that mirror that aren't on Docker Hub, but I do know it will use the mirror instead. Docker documentation: https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon.
Essentially, you need to add "registry-mirrors": [] to the /etc/docker/daemon.json configuration file. So if you have a mirror hosted at https://my-docker-repo.my.company.com, your /etc/docker/daemon.json should contain:
{
"registry-mirrors": ["https://my-docker-repo-mirror.my.company.com"]
}
Afterwards, restart the Docker daemon. Now if you do a docker pull postgres:12, Docker should fetch the image from the mirror instead of directly from Docker Hub. This is much better than prepending all images with my-docker-repo.my.company.com
It turns out this is actually possible, but not using the genuine Docker CE or EE version.
You can either use Red Hat's fork of docker with the '--add-registry' flag or you can build docker from source yourself with registry/config.go modified to use your own hard-coded default registry namespace/index.
The short answer to this is you don't, or at least you really shouldn't.
Yes, there are some container runtimes that allow you to change the default namespace, specifically those from RedHat. However, RedHat now regrets this functionality and discourages customers from using it. Docker has also refused to support this.
The reason this is so problematic is because is results in an ambiguous namespace of images. The same command run on two different machines could pull different images depending on what registry they are configured to use. Since compose files, helm templates, and other ways of running containers are shared between machines, this actually introduces a security vulnerability.
An attacker could squat on well known image names in registries other than Docker Hub with the hopes that a user may change their default configuration and accidentally run their image instead of the one from Hub. It would be trivial to create a fork of a tool like Jenkins, push the image to other registries, but with some code that sends all the credentials loaded into Jenkins out to an attacker server. We've even seen this causing security vulnerability reports this year for other package managers like PyPI, NPM, and RubyGems.
Instead, the direction of container runtimes like containerd is to make all image names fully qualified, removing the Docker Hub automatic expansion (tooling on top of containerd like Docker still apply the default expansion, so I doubt this is going away any time soon, if ever).
Docker does allow you to define registry mirrors for Docker Hub that it will query first before querying Hub, however this assumes everything is still within the same namespace and the mirror is just a copy of upstream images, not a different namespace of images. The TL;DR on how to set that up is the following in the /etc/docker/daemon.json and then systemctl reload docker:
{
"registry-mirrors": ["https://<my-docker-mirror-host>"]
}
For most, this is a non-issue (this issue to me is the docker engine doesn't have an option to mirror non-Hub registries). The image name is defined in a configuration file, or a script, and so typing it once in that file is easy enough. And with tooling like compose files and Helm templates, the registry can be turned into a variable to allow organizations to explicitly pull images for their deploy from a configurable registry name.
if you are using the fedora distro, you can change the file
/etc/containers/registries.conf
Adding domain docker.io
Docker official position is explained in issue #11815 :
Issue 11815: Allow to specify default registries used in pull command
Resolution:
Like pointed out earlier (#11815), this would fragment the namespace, and hurt the community pretty badly, making dockerfiles no longer portable.
[the Maintainer] will close this for this reason.
Red Hat had a specific implementation that allowed it (see anwser, but it was refused by Docker upstream projet). It relied on --add-registry argument, which was set in /etc/containers/registries.conf on RHEL/CentOS 7.
EDIT:
Actually, Docker supports registry mirrors (also known as "Run a Registry as a pull-through cache").
https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon
It seems it won't be supported due to the fragmentation it would create within the community (i.e. two users would get different images pulling ubuntu:latest). You simply have to add the host in front of the image name. See this github issue to join the discussion.
(Note, this is not intended as an opinionated comment, just a very short summary of the discussion that can be followed in the mentioned github issue.)
I tried to add the following options in the /etc/docker/daemon.json.
(I used CentOS7)
"add-registry": ["192.168.100.100:5001"],
"block-registry": ["docker.io"],
after that, restarted docker daemon.
And it's working without docker.io.
I hope this someone will be helpful.
Earlier this could be achieved using DOCKER_OPTS in the /etc/default/docker config file which worked on Ubuntu 14:04 and had some issues on Ubuntu 15:04. Not sure if this has been fixed.
The below line needs to go into the file /etc/default/docker on the host which runs the docker daemon. The change points to the private registry is installed in your local network. Note: you would require to restart the docker service followed with this change.
DOCKER_OPTS="--insecure-registry <priv registry hostname/ip>:<port>"
I'm adding up to the original answer given by Guy which is still valid today (soon 2020).
Overriding the default docker registry, like you would do with maven, is actually not a good practice.
When using maven, you pull artifacts from Maven Central Repository through your local repository management system that will act as a proxy. These artifacts are plain, raw libs (jars) and it is quite unlikely that you will push jars with the same name.
On the other hand, docker images are fully operational, runnable, environments, and it makes total sens to pull an image from the Docker Hub, modify it and push this image in your local registry management system with the same name, because it is exactly what its name says it is, just in your enterprise context. In this case, the only distinction between the two images would precisely be its path!!
Therefore the need to set the following rule: the prefix of an image indicates its origin; by default if an image does not have a prefix, it is pulled from Docker Hub.
Didn't see the answer for MacOS, so want to add here:
2 Method as below:
Option 1 (Through Docker Desktop GUI):
Preference -> Docker Engine -> Edit file -> Apply and Restart
Option 2:
Directly edit the file ~/.docker/daemon.json
Haven't tried, but maybe hijacking the DNS resolution process by adding a line in /etc/hosts for hub.docker.com or something similar (docker.io?) could work?
I've recently started to use docker far and wide for my professional projects. I'm still getting to grips with many of the details.
So far, when trying to acquire a software package from a repository on gitlab or github, I have gone the route of acquiring a token, putting the token in some environment variable, and passing that to docker build via the --build-arg argument and then to the git clone command.
However, as I started pushing my images to dockerhub, I was a bit shocked to find that in the "Image Layer Details" section, it displays also the value of the environment variables passed to docker build, that is, the content of my security tokens. Now, this is not so problematic because I can just revoke them and create new ones everytime I push, but that seems quite cumbersome.
Is there a good way to pass security tokens to docker build such that they don't show up in anywhere publicly?
First I want to mention that COPYing the secret (if it's a file) or using ARG (with docker build --arg) will always be visible (either by inspecting the layers or checking the image with docker history <image-id> so those options are out of the question
Docker now supports BuildKit which enables you to mount secrets during build time.
One way to do this is by adding the following statement in your Dockerfile:
RUN --mount=type=secret,id=mysecret <some_command>
and during build use:
export MYSECRET=bigsecret
DOCKER_BUILDKIT=1 docker build --secret id=mysecret,env=MYSECRET -t myimage:latest .
The secrets should be available at /run/secrets/<secret_name> by default, but you can also specify the destination yourself (check the link).
I need to block all registries and allow only one private registry for docker to pull images from , how can that be done natively in docker.
Using the RedHat options will not work on the upstream Docker CE or EE engine, RedHat had forked the docker engine and added their own features that are incompatible. You'll also find that /etc/sysconfig/docker is a RedHat only configuration file, designed to work with their version of the startup scripts. And I don't believe RedHat supports this old fork either, instead preferring their own podman and crio runtimes.
A hard limit on registry servers is not currently supported in the Linux Docker engine. The standard way to implement this for servers is with firewall rules on outbound connections, but that needs to only permit outbound connections to a known allow list. You still need to ensure that users don't import images from a tar file, or rebuild the otherwise blocked images from scratch (for example, all of official images on Docker Hub have the source available to rebuild them).
With Docker Desktop, the ability to restrict what registries a user can pull from has been added in their paid business tier with their image access management.
Previously I might have suggested using Notary and Docker Content Trust to ensure you only run trusted images, but that tooling has a variety of known issue, including the use of TOFU (trust on first use) that allows any image from a repo that hasn't been seen before to be signed by anyone and trusted to run. There are a few attempts to replace this, and the current leader is sigstore/cosign, but that isn't integrated directly into the docker engine. If you run in Kubernetes, this would be configured in your admission controller, like Gatekeeper or Kyverno.
Just found in redhat docs:
This can be done on docker daemon config:
/etc/sysconfig/docker
BLOCK_REGISTRY='--block-registry=all'
ADD_REGISTRY='--add-registry=registry.access.redhat.com'
and then do:
systemctl restart docker
I'm using the official docker image for payara full, the 5.183 version, here is my setup.
I've tried admin/blank, admin/admin, admin/changeit, nothing works.
I could not find any documentation on the payara site about this and the blogs I've found related to this did not help.
The credentials for all Payara Server docker images are admin/admin for the username and password. You can find this out in the README in the GitHub repositories (also available in Docker Hub):
https://github.com/payara/docker-payaraserver-full/blob/5.183/README.md
...the admin interface is secured by default (in both the default domain1 as well as payaradomain), accessible using HTTPS on the host machine: https://localhost:4848 The default user and password is admin.
You can also see this is the case from the actual Dockerfile at line 34:
https://github.com/payara/docker-payaraserver-full/blob/5.183/Dockerfile#L34
ENV ADMIN_PASSWORD admin
If this isn't working for you, then something else is probably going on.
I tested this myself using docker run -it -p 4848:4848 payara/server-full:5.183 and found I could log in with admin/admin. For reference, here is the exact image I was using:
REPOSITORY TAG IMAGE ID CREATED SIZE
payara/server-full 5.183 b216dd970898 3 months ago 973MB
Check that your ID matches to verify that it is the same image.
I have been in a similar situation - the difference was that it wasn't a docker image - I had only to execute asadmin change-admin-password from the ...\payara-5.2020.5\glassfish\bin folder and when prompted for the current admin password (eg. "Enter the admin password>") just leave blank and continue with the next steps of setting it.
So, basically, what I have learnt from this is that the password is not yet set and you have to use the CLI to set it before using the console.
Note: I have taken the summary above from here. You may also check if the full scenario from there fits you better.