After building my electron node addon using cmake-js I got the following error
This version of Node.js requires
NODE_MODULE_VERSION 103. Please try re-compiling or re-installing
What's the proper way to specify the node module version in cmake.js file or in the cmake-js compile command?
Related
I'm using sever side rendered react front end on a .net core MVC webapp.
I just switched over to IOS. When I tried debugging my project. I received the following errors:
DllNotFoundException: Unable to load shared library 'kernel32' or one
of its dependencies JsEngineLoadException: Failed to create instance
of the V8JsEngine. See the original error message: “Unable to load
shared library 'kernel32' or one of its dependencies.
Bassed on This issue, It seems like IOS doesn't have the package that the react script is looking for.
Is there an easy way to have V8JsEngine be less OS dependent, or set a development config for V8 to have it talk to the correct OS package?
React.Sample.Webpack.CoreMvc#1.0.0 build
webpack 4.43.0
node v16.19.0
npm 8.19.3
node v8 9.4.146.26-node.24
I tried running brew install v8.
It apparently installed v8--11.0.226.13.arm64_ventura.bottle.tar.gz, but I'm not sure how to check which version of v8 the SSR webpack is using.
I had Dart SDK with version 2.16 installed and worked fine on my machine.
I tried to install the Dart with version 3 which is currently in development (3.0.0-0.0.dev), so in order to try it, I replaced the path of the Dart sdk in the environment variables with the path of the new dart with version 3, Then I created a new project on VScode, and this showed up:
Here I am writing code with the Records feature ( Which exists only in that Dart 3 dev version), and this error shows up:
This requires the 'records' language feature to be enabled.
Try updating your pubspec.yaml to set the minimum SDK constraint to 3.0.0 or higher, and running 'pub get'.
But on my pubspec.yaml:
environment:
sdk: '>=3.0.0-0.0.dev <3.0.0'
but that error is thrown, and I have no idea what cause it and how I can fix it and run the code successfully.
Thank you.
I am trying to install flutter and run the basic flutter example on visual studio code . I used flutter doctor in the command line and installed all the missing requirements , now i try to run a basic program in flutter ,but in visual studio code output i get the following error
[Running] dart "c:\fluttercode\mobile_test1\lib\main.dart"
'dart' is not recognized as an internal or external command,
operable program or batch file.
[Done] exited with code=1 in 64.965 seconds
I could find only one question similar to this in stack overflow ,
Visual Studio Code: dart not found
they told to change environment variables ,i added the environment variables (however the name of the environment variables was not mentioned in the answer )
I checked the dart site in case they mentioned it ,but i couldn't find anything related to the name of the environment variable
This is what i got from dart site
Windows:
In Windows, setting your PATH and environment variables can be done by opening Control Panel and typing “Environment” and then clicking the “Edit the system environment variables” option. You’ll be presented with a list of environment variables including PATH where you can edit or add new ones.
Note: You should reboot your computer after making changes to PATH to ensure all processes (including explorer) are updated.
So i just did a guess and added an environment variable with the name FLUTTER_ROOT(cause i remember reading somewhere in one of the settings in VS Code for dart ,this name was used) and pointed it to my flutter bin directory
I restarted my PC and opened vs code and changed in VS Settings >user settings>dart and flutter>Dart:Env and updated my path
{
"files.autoSave": "afterDelay",
"dart.flutterSdkPath": "C:\\src\\flutter\\bin"
}
But i get the same error
this is how my flutter bin folder looks like
Environment variables in PATH after installing Dart
You don't have to install the dart SDK if you already have the flutter SDK installed. When you specify the path of flutter, VSCode only recognizes the flutter commands and not the dart commands. What you should do is change the system environment variables (type env in the windows search bar) and add the dart sdk inside the PATH variable. The dart sdk is usually found inside /bin/cache/dart/bin. This worked for me, so give it a try
Try to add the flutter\bin sdk path and also the windows\system32 path to the user variables and/or system variables.
I had the same problem. Here is how I resolved it.
Download and extract dart sdk (I used the stable release)
https://v1-dartlang-org.firebaseapp.com/install/archive
add the dart sdk bin folder to your path
after you have added it to your path run
flutter pub global activate webdev
now i can run
webdev serve
without error.
I'm using windows so I used choco install dart-sdk -<version> to install dart through the powershell in admin mode. That got rid of my error
Installing flutter is not enough. You need to install the dart sdk.
Pre-req: Make sure you have Chocolatey installed on your machine.
Run "choco install dart-sdk" from an elevated prompt.
Restart vscode.
That did it for me.
I went to the dart website and searched for the dart sdk.
i then chose the option to install dart using setup wizard.
After running the executable file on my laptop it took some time to download all the files but once the setup was complete the error no longer occurred and i was able to run the code successfully.
Downloading dart setup from dart website
Installing using setup wizard
Someone has asked the exact question I need on this page.
However, as I am new, my rep will not allow me to comment yet! So I have had to create a new question.
A guy in the question linked above suggests to "Type cordova platform add ios;". So there I suppose is where my question is different.
When I type Cordova in cmd prompt, I get a message saying "cordova is not recognized as an internal or external command, operable program or batch file."
Update: Please note, I have followed these steps: http://cordova.apache.org/docs/en/7.x/guide/cli/ And I am able to run the npm commands in CLI. I was hoping to simply update my ios version only.
I have also looked up PATH but I have no idea where to start, problem is, people suggest that I shouldn't need to adjust PATH as running the CLI commands to install the Cordova CLI should just allow me to use it?
So to summarize:
I downloaded the node.js and installed it
I typed this into cmd "npm install -g cordova" which installed
I type "cordova" and get my "cordova is not recognized as an internal or external command" message above
My aim is to upgrade my cordova-ios 4.2.0 to cordova-ios 4.3.0 to fix my main error of "remote build requires your projects to use cordova-ios 4.3.0 or greater with XCode 8.3"
Update 2 9th oct 2017:
I have given up for now with the above, to work around this i installed Node.js 8.6.0 then updated cordova using npm... im now facing some more issues that I am again stuck on and will create a new question.
Hopefully in the meantime, someone can answer this question and i can try again.
I suspect my issues could be relating to the fact i installed VS 2017 and used all the built in nuget packages (for cordova and node.js) and they are conflicting with the manual way in some way (i suspect that, as running the "cordova" command on my other PC worked fine!)
While trying to run the Google cloud dataflow Wordcount example in eclipse referenced here https://cloud.google.com/dataflow/docs/quickstarts/quickstart-java-eclipse
I am getting the following error:
An internal error occurred during: "Update Hierarchy".
Tried to create a TypeHierarchyPipelineOptionsHierarchy for a Java Project 'my project name' where no PipelineOptions type exists
This issue was also faced by somebody else as per the following stackoverflow link:
Eclipse: An internal error occurred during: "Update Hierarchy"
I tried the solution above, the project compiles but it does not run even after Force Update of Snapshots/Releases as explained above.
Based on my research of the problem it looks like google-cloud-dataflow-java-sdk-all-2.0.0-beta1.jar does not have the PipelineRunner class, which is causing the error. The 1.9.0 version of the same jar had those classes.
I cannot use 1.9.0 version of the jar directly because it causes other compilation errors e.g. package change to 'org.apache.beam' instead of 'com.google.cloud.dataflow'
Indeed, there's an issue in the older versions of the Google Cloud Dataflow plugin for Eclipse -- older versions are not forward-compatible with Dataflow SDKs 2.x series, but the project generation may still automatically create a project using the newest 2.x SDK.
To solve the problem, please upgrade to the newest version of the plugin.
Projects generated with versions 1.1.2 of the Dataflow Plugin for Eclipse and earlier will generate projects using the most recent archetype. With the release of Dataflow 2.0.0-beta1, the generated project will use the Apache Beam SDK as an underlying dependency. Modifying the project version to 1.9.0 or earlier will not modify the generated code, which causes the compilation failures you're experiencing.
Version 1.1.3 of the plugin will ensure that any generated project remains within the Dataflow namespace. Future versions will also work forwards-compatibly with Apache Beam. Version 1.1.3 should be available - in Eclipse, go to Help -> Check for Updates (possibly running Perform Setup Tasks to clear the cached current version) should make the updated plugin available.
We have published version 1.1.3 of the Dataflow Plugin for Eclipse; the quickstart example should now function. The project you've generated will not work until a future release of the Dataflow Plugin for Eclipse. Updating the plugin and re-running the quickstart should succeed.