I am using iqunload -n -c "uid=myid;pwd=mypwd;host=myhost;port=myport;dbn=mydbn". iqunload does not like host=;port= . Is there another way?
Related
I was reading a blog post on Percona Monitoring Plugins and how you can somehow monitor a Galera cluster using pmp-check-mysql-status plugin. Below is the link to the blog demonstrating that:
https://www.percona.com/blog/2013/10/31/percona-xtradb-cluster-galera-with-percona-monitoring-plugins/
The commands in this tutorial are run on the command line. I wish to try these commands in a Nagios .cfg file e.g, monitor.cfg. How do i write the services for the commands used in this tutorial?
This was my attempt and i cannot figure out what the best parameters to use for check_command on the service. I am suspecting that where the problem is.
So inside my /etc/nagios3/conf.d/monitor.cfg file, i have the following:
define host{
use generic-host
host_name percona-server
alias percona
address 127.0.0.1
}
## Check for a Primary Cluster
define command{
command_name check_mysql_status
command_line /usr/lib/nagios/plugins/pmp-check-
mysql-status -x wsrep_cluster_status -C == -T str -c non-Primary
}
define service{
use generic-service
hostgroup_name mysql-servers
service_description Cluster
check_command pmp-check-mysql-
status!wsrep_cluster_status!==!str!non-Primary
}
When i run the command Nagios and go to monitor it, i get this message in the Nagios dashboard:
status: UNKNOWN; /usr/lib/nagios/plugins/pmp-check-mysql-status: 31:
shift: can't shift that many
You verified that:
/usr/lib/nagios/plugins/pmp-check-mysql-status -x wsrep_cluster_status -C == -T str -c non-Primary
works fine on command line on the target host? I suspect there's a shell escape issue with the ==
Does this work well for you? /usr/lib64/nagios/plugins/pmp-check-mysql-status -x wsrep_flow_control_paused -w 0.1 -c 0.9
http://pktgen.readthedocs.org/en/latest/running.html
This is the pktgen dpdk application. The screenshot in that link shows how ports are configured. But For me it doesnt configure at all. I am looking for help as a beginner
First, as you may know, pktgen is an application that use the DPKD framework, thus, you should have bind at least one NIC to DPDK. Check the documentation about DPDK: DPDK building instructions. You should see your NIC correctly bound with this command:
# path/to/DPDK/tools/dpdk_nic_bind.py --status
Then, you can run pktgen. The ports you want to use are specified with the -p option (It's a specific pktgen option so it's after the --). It's a port mask, so for instance, if you want only the first port (port 0) you can use -p 0x1.
Then, the -m option permit you to choose which core will handle which DPDK port. The syntax is not really obvious, I suggest you to read the doc of pktgen about this option: pktgen command line options.
For example, to be short, the option -m "[1:3].0" says you want that CPU core 1 handle "RX port 0", and CPU core 3 handle "TX port 0".
A simple command line for pktgen, if you use only one port running on two cores could be:
./app/pktgen -c 0x7 -n 3 -- -p 0x1 -P -m "[1:2].0"
In that case CPU core 1 and 2 (possible because of the "-c 0x7 option") will be used to handle respectively RX and TX of port 0 (configured with "-p 0x1"). Note that -P is for promiscuous mode.
I am trying to do this: set Wireshark filter to "http contains site.do" in tshark. I'm not sure how to do this using just the command line version. How do I do that?
Try
tshark -Y "http contains site.do"
This is because the display filters are different of capture filters. For example you can do it to save http traffic of one host.
tshark -f "host www.site.do and (port 80 or port 443)" -w example.pcap
You can get more info about the capture filters here
I'm using iperf3 that is supposedly a rewritten version of iperf. Reason why Im using this is because I love iperf when it comes to TCP and UDP throughput and I now want to test SCTP throughput between my end-points.
However when I'm trying to use the --sctp command that I've seen people been using it says command not recognizable. Is it the implementation I'm using that have not implemented this command?
https://github.com/esnet/iperf
This is the implementation I'm using, can't find any obvious documentation of the SCTP commands related to this. Most SCTP iperf implementations are added manually in the tests and the source code is often not provided.
Any help would be appreciated!
Get a copy of iperf which supports lksctp module of linux kernel. Install it using the standard process. (If it fails, please inform with the error message and the operating system and kernel details). Now to use SCTP in iperf these are the proper syntaxes.
For creating an SCTP server,
iperf -z -s
(-z is for selecting the SCTP protocol and -s is for server.)
For creating an SCTP client,
iperf -z -c <host address> -t <time duration for the connection in second>s -i <interval of the time to print the bandwidth in terminal in second>s
(-z for SCTP, -c is for client. Host address should be the ip address of the server where iperf -z -s is already running. -t is to specify the communication time duration. -i is to specify the interval to show the bandwidth.)
Example:
iperf -z -c 0.0.0.0 -t 10s -i 2s
Here the communication time is 10 seconds and it'll report the bandwidth for each 2 seconds interval.
P.S.
(1) To use iperf for SCTP, you must enable the SCTP module in the kernel and recompile it. The kernel version must be 2.6 or above. Check it using uname -a or uname -r. If you have a lower one, then download a new kernel from The Linux Kernel Archives. And compile it by enabling SCTP.
First check if it is already enabled or not by running these two commands in the terminal.
modprobe sctp
lsmod | grep sctp If you get any output then SCTP is already enabled.
(2) If still iperf with -z fails. Try the following solution. If the two machines are 'A' and 'B'.
First make 'A' the server and 'B' the client. It won't succeed. So
exit by using `ctrl + z` and kill iperf
using `pkill -9 iperf`.
Then make 'B' the server and 'A' the client. It may succeed. If it fails again, kill iperf using the above command and repeat step 1 again. it might get succeeded.
(The 2nd solution works for me with fedora 20 and kernel 2.6 and above.)
Couldn't find any recent answers through googling so I though I would leave an answer here for those looking to installing Iperf3 to use SCTP on RHEL / CentOS.
You'll need to install lksctp-tools-devel first and build from source to enable the SCTP support. Yum Install Iperf3 3.17 with lksctp-tools-devel did not enable SCTP for me.
Currently I am transporting files back and forth over telnet and I would like to send multiple files at once.
However, my target platform (a Blackfin processor) does not have "tar" enabled in its kernel/busybox configuration (a uClinux distribution).
As you all know the normal command is:
nc -p 12345 -l | tar -x
tar -c * | nc 192.168.0.100 12345 # with x.100 the robot IP address
How can I send multiple files using netcat without using tar?
Please, consider that I cannot easily add binaries on the platform. It would be best to do it with basic utilities and/or shell scripts.
Finally managed myself to do this, it can be done!
Here $l> stands for your machine with IP 192.168.0.10. And $e> is done on the embedded device without tar, in my case a robot. It uses old-fashioned dd which is able to copy an entire disk.
$l> nc -p 12345 -l | dd obs=4K of=/tmp/file.jffs2
$e> dd ibs=4K if=/dev/mtdblock2 | nc 192.168.0.10 12345
This is it, but because not everybody knows how to read a filesystem that is in this form, this is how you mount it:
file /tmp/file.jffs2
/tmp/file.jffs2: Linux jffs2 filesystem data little endian
sudo su #careful
mknod /tmp/mtdblock0 b 31 0
modprobe loop
losetup /dev/loop0 /tmp/file.jffs2
modprobe mtdblock
modprobe block2mtd
echo "/dev/loop0,128KiB" > /sys/module/block2mtd/parameters/block2mtd
modprobe jffs2
mkdir /media/robot
mount -t jffs2 /tmp/mtdblock0 /media/robot
Ctrl-D #back as normal user
And yes, you need the loopback device, or else:
sudo mount -t jffs2 /tmp/file.jffs2 /media/robot
mount: /tmp/file.jffs2 is not a block device (maybe try `-o loop'?)
Logically, it is a file (chars), and not a block device. The only thing I do not know is if there is a syntax for dd in which the command on the embedded device, can only select a subset of the filesystem to be included. I don't think this is likely because that would require dd to understand jffs2 while its strength is its raw byte copying behaviour.