When I download the Trader Workstation (TWS Latest) of InteractiveBrokers for Windows 64 bit in this page and execute it, it pops up the following error:
Error downloading the Java(TM) Runtime Environment. Please check your internet connection and start the installation again.
Log: C:\Users\username\AppData\Local\Temp\i4j_nlog_19.log
I tried installing Java Runtime Environment from the official site, but it doesn't work. Also tried installing any of the other available versions of the Trader Workstation. There is not any solution on the internet, so if someone has an idea of why this happens and a possible solution it would be awesome. Thanks in advance.
Related
I installed Jenkins previously but it had some issue (there was no start icon) in the folder, so I uninstalled it. Now I'm trying to install it again, but it tends to pop this error:
I tried all the solutions mentioned in this post , but no success - Jenkins failed to start - Verify that you have sufficient privileges to start system services
As mentioned in the option 2 of the post, I tried to start jenkins in services but got a 1067 error
I read a lot of similar posts, but none of them really helped. I believe my user has enough privileges to work without causing any trouble, so the underlying problem is something else. Please help me figure out the issue.
I found the solution!
Turns out Jenkins doesn't work on other JDKs except for 8,11. And I have the 14th version. I'm putting the link to the answer that helped me change the JDK version.
Jenkins requires Java versions [8, 11] but you are running with Java 16 from C:\Program Files\Java\jdk-16.0.1
Here's what happens:
Using a Macbook Pro, I use the Microsoft Remote Desktop Connection application to connect to my work computer, which is a Windows 10 machine
If I try to launch Spyder on my work computer, I get this error:
Load Library Error
However:
If I am at my work computer (i.e. physically at work instead of logging in remotely), I can launch Spyder successfully
If I leave Spyder open on my work computer, then go home and do a remote log-in to my work computer, I can use Spyder without issue. The problem/error described above arises only if I try to open Spyder through the remote connection.
This error only seems to affect Spyder and I can use all other programs without issue through a remote connection. As a workaround I've been using other IDEs and successfully running scripts, but I strongly prefer Spyder.
What I have tried so far (without success):
The 4 troubleshooting steps posted by Fazil M. to this Microsoft thread
Uninstalling/reinstalling Spyder using Conda
Restarting my work computer
System Information:
Work Computer OS: Windows 10, 64-bit
OS of computer through which I'm logging in to work computer: Mac OS X El Capitan 10.11.6
Spyder version: 4.1.1
Any thoughts as to what could be going on?
Update--More information and trials:
I checked out Issue #3736 on Spyder's GitHub. It says to download and add a file called opengl32sw.dll to the folder ~\Lib\site-packages\PyQt5\Qt\bin. But when I go to the PyQt5 folder, I do not see a subfolder for Qt. I tried placing it into the PyQt5 main folder, but that did not fix the problem.
I've heard this can be a graphics card issue too. On my machine I have two graphics cards: AMD RadeonT R5 430 and Intel(R) HD Graphics 630.
Darren's answer did not work for me. What did work was to:
First option: go into the device manager and disable the Intel HD Graphics card under "display adapters."
Second option:
run "Gpedit.msc"
navigate to Computer Configuration->Administrative
Templates->Windows Components->Remote Desktop Services->Remote
Desktop Session Host->Remote Session Environment
Disable "use WDDM graphics display driver for remote desktop
connections"
Restart the computer
See https://answers.microsoft.com/en-us/windows/forum/all/windows-10-1903-may-update-black-screen-with/23c8a740-0c79-4042-851e-9d98d0efb539
It took help from my organization's IT contractor, but I fixed the issue by doing the following:
Run a file called "gpedit.msc", which will open up a window for Local Group Policy Editor
In the tree menu on the left, navigate to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Remote Session Environment, and open the Remote Session Environment folder (not the subfolder within it)
Make sure the following are set to "Enabled":
"Use hardware graphics adapters for all Remote Desktop Services"
"Prioritize H.265/AVC444 graphics mode for Remote Desktop Connections"
"Configure H.264/AVC hardware encoding for Remote Desktop Connections"
Then restart the computer.
Since I was unable to get pass LoadLibrary 126 error using the solutions provided online and on here, I stepped back and realized the obvious workaround. The errors occurs when you open the program while you're using a remote session, right? The obvious solution is to launch the program while a remote session is not in progress. To do this while you're remoting, you should create a batch script to launch the program but make sure to include to a time delay before that (I used 'timeout 10 /nobreak' to do so). Run the batch script and, before your program launchs, disconnect from RDP. After enough time passes for the program to launch, you can reconnect to RDP and your program will be up and ready
We have Jenkins installed and running on a WebSphere Application Server. We recently upgraded the server to version 8.5.5 and switched the profile to use JDK version 1.7. Doing this Jenkins Crashes the WebSphere Application Server and we cannot tell why. Any hints or suggestions on things to look at? Switching the server back to JDK 1.6 seems to work just fine, can Jenkins not run on JDK 1.7 or is it something else?
I'll assume that by crash the websphere application server you mean either a fatal error at startup or a java process crash. Those can have many causes.
Just to give some ideas, it may be related to the fact that you had somewhat customized your JDK install and forgot to re-apply those customization to your new JDK. Or that switching SDK requires you to switch command line options, or that you indeed hit an incompatible class in the stack, or that your process crash because of bad luck, etc.
So please find more information in the logs, either the corresponding stack traces in your WAS server logs or the javacores crash files.
Please also report your jenkins version.
As for JDK 7 compatibility, latest jenkins itself should be compatible, yet some plugins are not
You may also want to read this: https://stackoverflow.com/questions/17411717/jenkins-on-websphere-reports-java-lang-noclassdeffounderror-jenkins-model-jenki. Maybe you have the same issue.
If you indeed find out an incompatibility, please report an issue in jenkins issue tracker and consider updating the Jenkins Websphere wiki.
I have a Windows service installer. It can install and is working correctly on my machine.
But it gives an error when installing on a client machine. The error as follows:
Verify that you have sufficient privileges to start system services.
How do I solve this problem?
Debug your service installer using the information in the answer to Stack Overflow question Failed to install and start Windows services in WiX installer to find the root cause of the issue.
I searched for an answer to this, but was unable to find anyone else having the same problem.
This is the first time I've tried to use Neo4j.
I'm running on Windows Server 2008 R2 Standard.
I downloaded and unzipped Neo4j Community 1.8.2 for Windows.
In a command window, I switched to the bin folder and ran Neo4j.bat.
I received the following message in the command window: Unable to locate jvm. Could not find HKLM\SOFTWARE\JavaSoft\Java Runtime Environment/CurrentVersion entry in windows registry.
I verified that I have the latest JVM.
I verified that the above registry key is not present in the location shown, but I did find it at HKLM\Wow6432Node\JavaSoft\Java Runtime Environment/CurrentVersion.
How should I proceed?
Thanks for any direction!
I Fixed this problem by making a new environment variable JAVA_HOME and pointing it to my Java installation folder
C:\Program Files (x86)\Java\jre7\bin
try to set up the java PATH variable to the correct path. tutorial here:
http://java.com/en/download/help/path.xml
than, newest java are i think by 2 version newer than the original java for neo4j 1.8.2. a remind myself some problems with such versioning few months ago - i solved it by running neo4j in the newest versions of 1.9.0x
I installed JRE version 6 on my machine and this cleared the problem. (I previously had version 7 on the machine.)
Set the JAVA_HOME path in your environment variables.