over the past week or so I’ve been trying to find a workflow for original sample generation to eventually be used in an audiokit app, obviously at some point Im going to have to decide which of AudioKits sampler classes best fits my needs and I have a few
Questions about what I have found so far :
I won’t be getting Logic Pro anytime soon so I think EXS24 is not an option right now, as a side question - are there any other
Apps which can generate .esx24 files?
The MIDISampler in AudioKit has a method .loadSoundFont( - is there a documented example of this? (couldn’t find any in cookbook)
I was able to get this working with .sf2 files but I want to make sure Im doing it properly.
There is a Sampler class in DunneAudioKit - I was also able to establish a workflow in this using .sfz files - this seems pretty good
Currently I am deliberating between the MIDISampler in AudioKit and the Sampler in DunneAudioKit
Are there any other options in the audiokit framework(s) that I should consider? Also the file formats .sf2 and .sfz I am guessing are probably going to stay in use for some time - has anybody heard about either of those two being deprecated or changed in a major way?
GarageBand can make AUPreset files and MainStage can make EXS24 files suitable for AppleSampler. I've not tried the DunneSampler but I believe that is the one AudioKit Pro uses for several of their commercial apps. There isn't an example in the Cookbook for SF2 in AppleSampler but it should be very similar. SF2 has been around for a very long time and I imagine SFZ will be too.
Related
Working in audio kit and I am looking to understand how people have incorporated drums. Obviously, the sampler is an option, but I am wondering if there is a built in option similar to some of the basic synthesis options.
There are a few options. I personally like the AppleSampler/MidiSampler like in the example but instead of using audio files you can create a EXS Sampler instrument in Logic where you can assign notes for different velocities. AppleSampler can also load AUPresets made in GarageBand and SoundFonts (SF2). The DunneAudioKit Sampler is an option if you are working with SFZ files, but I think that might be a work-in-progress in AudioKit 5. Loading WAV files directly into AppleSampler is also a good option if you just want one shot sounds.
I'm assuming you're mostly talking about playback of samples, not recording.
The best built-in option I've seen (other than AppleSampler/MidiSampler) is AudioPlayer, which lets you load in a sample and play it back on demand (from an on-screen pad, etc). MIDIListener can then help you respond to external MIDI events, etc. It works (I have a pretty big branch in my app where I tried it), but not sure it works well.
I wouldn't recommend DunneAudioKit Sampler for drums. There is no one-shot playback (so playing the same note in quick succession will cut off the previous note, even if you mess with the release). If you're trying to build a complex/realistic acoustic drum instrument, you'll also want round-robins so that variations of the same hit can be played, which Dunne also doesn't have. It can load SFZ files, but only a very limited subset of SFZ's opcodes (so again, it's missing things like round robins, mute groups, one-shot, etc).
Having gone down all those roads, I would suggest starting with AppleSampler, and I would build the EXS or aupreset file in Logic or Mainstage rather than trying to build something programmatically.
If your needs are really simple, the examples in AudioKit's recently released drum pad playground is a great place to start, loading single samples into a specific note on AppleSampler.
I wanted to know if it was possible for AudioKit to have multiple outputs, for instance two AKMIDISampler's. At the moment it seems like it can only have one.
I would assume this would be possible if I use an AKMixer, so if someone recommends that I use that I have one question. I'm using a soundfont ".sf2" file to initalize the AKMIDISampler, if I have multiple AKMIDISampler's using different soundfont files where both have the same MIDINoteNumber's but different audio results, how would I be able to differentiate from one sampler to the other?
Any pointers and advice will be greatly appreciated.
This seems like a reasonable request for AudioKit to be able fulfill. The thing is its not a great StackOverflow question because there's not just one clear answer. What I would suggest that you and anyone else that would like AudioKit to "x" would be to set up a project that you think should work ideally, even if it doesn't, and then share it publicly so the AudioKit core team can easily download it and try it out.
I've created a core mechanic of my game and want to create a level editor for it. my game is not a tile-based one, so my needs are quite specific. Game is written using Swift and Cocos2d-swift, but i dont think i can figure something out with Sprite Builder.
What you can advice me? Can I for example create a level editor with c# and then use it from swift code?
And what data structure is the best?
I mean is it possible to serialize classes on desktop Swift application and then just load them on ios from file or I'll need to use json/xml?
It might be an old question but I ended up with using a .Net powered solution. I choosed as It has all controls that you need for creating a rich user interface and also, it has a lot of built-in and third party solutions for serializing levels in any way you want. And the c# syntax is very similar to the Swift one.
The only problem is that you might run windows to work with it.
My game in development also needed a non-tile level editor. A few months ago I took some time to make my choice.
Since my project still uses cocos2d 2.x, I don't use the whole new 3.x and SB system. After some investigation I found out that it would be too time consuming to adjust my whole project to the new system and adjusting SB to my needs, mainly because my game engine has been in development for quite some time and is close to finished. Further more, I couldn't find the right information to actually make it work for my game (it needed some odd level architecture I guess).
Finally, I didn't find any other good alternative so I decided to create my own level editor. In this way I had full control and I knew exactly how everything worked which was a huge advantage for me.
Right now my level editor has been finished for some time and works like a charm. I still think in my situation I made the right choice. Also because I learned a lot this way, building everything from the ground up. Having said that, for my next game I will probably go with the main stream and use SB from the start. Also for you I advice you to still check out SB and take some time for it before making an alternative choice...
I'll explain how I did mine. Disclaimer: it has some oddity's which only worked in my situation, but hopefully it helps a bit with choosing your own way to go, that's the goal I'm aiming at...
I used:
max/msp
Although it's developed to make music and audio based software, I used max/msp because it's very easy and fast for creating visual and interface based software as well.
More importend: I happened to be very experienced in it, which shortened the development time tremendously.
javascript
Inside the max/msp patch is a javascript file running. This file is like a bridge between the interface and the visual representation of the level being edited, and the database in which the level
is saved in. 70% of the editor development went into this file I think.
sqlite
All the data is written in a sqlite database. Again, this has been mainly the choice because it saved a great amount of development time in my case. I could have used xml files for instance, but my game was already using a sqlite database and because of this I felt comfortable using it, I had no experience in xml. Also all the code was already in place for a big part, which speeded up the whole proces a lot.
I'm very happy with the end result. It does everything I need, it's easy too use and since I made everything myself from the ground up I know exactly how every works.
Good luck with you choices.
I've read quite a bit both here (Audio Framework in iPhone) and abroad but am still confused as to which Audio Framework to use.
I'm able to get some easier things done, like recording and playing back but I'm looking to the future of the app where I'll be doing more complex things, like managing past recordings (although maybe that's a NSURL bookmark thing) and editing audio.
Right now I'm using AVFoundation but have started reading the docs for Core Audio (and there's also AudioToolbox). I wish there was a developer doc called "Understanding the Different Audio Frameworks and How and When to use them" because, well, the docs are dense and I'm having trouble figuring out which path to go down.
Links to good docs would also be much appreciated!
I recommend you take a look at the recent Learning Core Audio book. The purpose of it was to disambiguate the confusion around audio frameworks on Mac OS and iOS. If you want "good docs", it's well worth getting.
Depending on your requirements, you might also want to consider some of the non-Apple audio frameworks, particularly the MoMu release of STK, which in may respects will be simpler and easier-to-use than Apple's frameworks.
I was wondering so long that how can people analyze the trait of each file extension (of course open it in notepad is not readable)
For example, I want to write a program that can read everything from .fla file like timeline, movie clips, position of each MCs or all the motion tween values. And get the image embeded in it. (I'm planning to use flash as IDE for another project.)
(The reason that I tried to read proprietary format is I want to utilize their awesome editor. What I actually want to do is, I want to make an iOS game with cocos2d. There is a code to move things around in cocos2d but there is no decent editor. So I'd like to use Flash as an editor, then convert the motion to objective-C cocos2D code by reading the .fla file.)
If you would like to be able to import timeline animation from flash into cocos2d, this tool might help. More information in this thread.
The grapefrukt-exporter might also help as it can export keyframe data, and various other formats for animation.
Instead of creating the tool yourself, it might be much easier (and time saving) to use one of these and integrate it into your workflow :)
Finally, if none of the above works, how about just exporting the flash animation as an animated GIF or a movie file?
Im assuming you want to write a decompiler, this is possible and there are several available on the internet, price varies.
It is not possible for flash to achieve this, Most programs, software are built on a native language such as C, Native meaning it can independly run in its own with out initially setting up an invironment to support it.
Flash is not independent enough to be available to have this much power.
Try looking at c++ or C# as this would be possible, also these languages are a lot more powerful.