I have tried deleting "$(inherited)" in library search paths and but it's not working
Have a try with the below solution.
You can go to File > Workspace Settings if you are in a workspace environment or File > Project Settings for a regular project environment.
Then click over the little grey arrow under the Derived data section and select your project folder and close the workspace and Xcode then delete the project directory from the derived data directory.
Open the workspace again in Xcode and clean and rebuild the project.
Also, make sure that you have applied pod install after the package installation.
I pulled from git and everything works fine except I got this error even though I can still run the project. Is there a way to fix this?
This usually means there was a merge conflict that got committed to the actual project.pbxproj file.
Since this is a Pods project (which is ephemeral and can be recreated at will) you can run pod install from the command line (in the same folder as your Podfile and it will regenerate the project.
problem:- Workspace integrity (could not load project) I got the same issue also I hit and try many solutions (Restart mac, Cache data remove, pods update, pods install, etc) but all in vain.
Solution : Once I try to open the project the "Xcode.copy" opened intead of my original Xcode . I just close all projects after that I open the project from selecting Xcode directly from the finder.
Note:- do not go to the project folder then open project from "projectName.xcworkspace"
you just need to go finder(Spotlite search) and open Xcode and open from finder then you must select the desired project. The project will work perfectly and after that you can open project manually (in your folder etc)
:) These things working from my side.
I am facing an issue while running iOS code from react-native
Unable to resolve build file: XCBCore.BuildFile (namedReferencesCannotBeResolved) (in target 'myProjectName')
I have tried many solution from stackover flow but nothing working.
Go to the menu Xcode -> Preferences and select the locations tab
Click the little arrow next to 'Derived Data' to open it in Finder
Quit xcode
4.You will see a bunch of folder in the DerivedData, delete all of them.
Restart Xcode and build your project.
Following above steps resolved the issue for me. (Xcode 11.3.1)
I have removed the plugin's and again add it. And do the Manual linking the plugin's in Code don't go for Pod's install.
I'm using TeamCity to build an iOS app, but I'm getting this error:
error: Specified application doesn't exist or isn't a bundle directory : '/Users/zzzzz/TeamCity/buildAgent/Work/zzzzzzzzzzz/platforms/ios/DerivedData/myApp/Build/Products/Debug-iphoneos/myApp.app'
I know the DerivedData folder gets populated during the build, but what specifies what to put in the Products folder? Is this part of the .xcodeproj file?
We recently changed to xcode 6, not sure if that has changed anything.
How to specify the DerivedData folder location:
From the Xcode menu, choose Preferences - > Locations > Advanced.
My issue was caused by the TeamCity build expecting a legacy location but Xcode was using the default DerivedData folder location.
More info:
https://developer.apple.com/library/ios/recipes/xcode_help-locations_preferences/Build/Build.html
After deleting/adding some png files to project, i have got messages when building project.
"file ProjectPath\aaa\xxx.png is missing from working copy."
All these files are in the project, and the application is running. However, these messages are annoying. Looked .plist file, but there is no mention of these files.
What should I do to remove these messages?
The warning will disappear as soon as you commit your changes (Xcode 8).
It seems that this problem may have different causes, but it's often in relation with source control software.
In my case, I solved it by going to Git, and adding the files again. I mean running the following command:
git add .
You can also disable source control by unchecking
Xcode -> Preferences -> Source Control -> Enable Source Control
if you're managing it via command line or any other app.
In XCode -> SoureControl:
Update + Refresh Status did it for me.
In my case, the file was missing from the source control.
To fix, I had to discard this file (be careful only discard the missing file not all your project):
Xcode->Source Control->commit
Right Click the missing file
Choose Discard Changes
Disable Source Control, clean build folder (Alt+Shift+Cmd+K), then Enable Source Control again.
Xcode -> Preferences -> Source Control -> Enable Source Control
In my case, Xcode had somehow found old .svn directories that referenced the missing files. I had to go up a level above my project folder to find those .svn files. Once deleted, I restarted Xcode and everything was fine.
I had a similar issue with a handful of files that had long since been deleted from my Xcode project while I was still using Xcode 7.
My solution was to:
Create files with the names Xcode was complaining about (they don't need any content)
Add the files to my Xcode project (in Xcode right click on my main project directory, click Add files to my_project_name and select the files that were just created
Select the newly added files and delete them - select move to trash.
This got rid of the warnings for me.
To add onto Alexander Vasenin's answer...
First I Committed and Pushed my changes
Xcode Main Menu > Source Control > Commit
Then I Discarded All Changes to get rid of the errors
Xcode Main Menu > Source Control > Discard All Changes
After that, the errors stating "file xxx.png is missing from working copy" disappeared.
This is occurred when you delete file on Xcode, but didnt tell svn server about it.
Go to command line tool, and delete file directly.
svn delete missingFile.m
and commit it
svn commit -m "Deleting file"
note that if you delete .svn folder, the warning is disappear but you will lost communication with svn server.
I worked it out.
just open your third-party SVN tool, find the miss files, Revert;
that's all.
I had same problem and solved it by add git .
Open Command Line Tool
cd "project folder path"
git add .
Later,restart Xcode project and open your project again.
Show on target->build phases -> copy Bundle Resources.
and
clean build folder command+shift+alt+k
I had to manually go into Terminal and remove the files with git rm ProjectPath\aaa\xxx.png and then commit. After that everything worked fine.
Got this for every project after moving on to XCode 8. This solved it:
With Option Key pressed, Product (in title menu) -> Clean Build Folder.
In my case, I had wrong data from my old projects in the simulator. Solved by reset content and settings in the simulator:
Simulator -> Reset content and settings...
For me the following worked:
Since I do not and did never use Git, I created a new project (XCode 8, I could not see the usual "use Git" or however the checkmark was labeled). Then I bluntly deleted all the files in this new project; went to the old messed up project, copied everything in the project folder, came back to the newly created project, pasted the old stuff, opened that - all the warnings about files that have not been existing for months are gone. Fingers crossed.
I had the same issue and solved it by simply dragging the specified files from finder into the project navigator (ensuring that "copy files" is selected in the dialog) and committing the files.
These warnings are not build warnings, they are about your SVN repository.
It is correct that the directories shown no longer exist, CocoaPods stores the headers in Pods/Headers/{Private,Public} now. You have to update your working copy to reflect those changes.
In my case I drag & dropped a number of files on my Xcode project window to add them. It made copies into my source directory but didn't put them where I wanted them to go (it put them at the root of my directory, I wanted them in a sub-directory). Without thinking I just grabbed them in the Finder and moved them to the directory I wanted them in. After going back into the project window it of course could not find them so I deleted them in the window and re added them. After compiling I started getting these errors.
I thought, as some mention above that it was a git issue but when I ran "git ls-tree --full-tree -r HEAD" I didn't see the files at all??
Anyway to fix it all I did was use the "Add File..." menu command to add each of the files to the default location, do a clean build, and then delete them from the project window (using move to trash) and it got rid of all the errors.
I had the warnings, and also could not commit changes under XCode (using svn). All I had to do was restart XCode and the problem went away.
This works for me:
Xcode -> ("option + click") Product -> Clean Build Folder...
Than restart xCode
In my case it was a problem with git and a case-insensitive file system.
I had inadvertently submitted the same file twice, using file paths that differed only in case:
MyProject/Resources/foo.png
MyProject/resources/foo.png
Xcode was complaining about one of the missing files.
Fixed by deleting the offending files, and re-adding.
cd MyProject
mv Resources/foo.png /tmp
git rm Resources/foo.png
git rm resources/foo.png
git commit
mv /tmp/foo.png Resources
git add Resources/foo.png
git commit
This is definitely related to source control. I renamed and moved a couple of non-committed plist files and got this error. I am using svn. I was able to fix this via Source Control - Commit by removing old referenced files.