I can't get any GIMP Fu script to work (using Gimp 2.10.32 (Revision 1) on Windows 10 Pro 21H2 19044.1826).
Consider this minimal script. It is supposed to read a file and write it out again under a different name, without applying any modifications: (Source: https://superuser.com/a/1558320/1130040)
(define
(mytest in_filename out_filename)
(let* (
(image (car (gimp-file-load RUN-NONINTERACTIVE in_filename in_filename)))
(drawable (car (gimp-image-get-active-layer image))))
(gimp-file-save RUN-NONINTERACTIVE image drawable out_filename out_filename)
(gimp-image-delete image)
)
)
While testing, I also added a 'script-fu-register' block that let's me check in GIMP's procedure browser that the script was detected and loaded without errors. Thus, also the location of the script is correct, as well as the set script paths under options.
(script-fu-register "mytest"
""
_"Test"
""
""
"2022/07/16"
""
SF-IMAGE "Image" 0
SF-DRAWABLE "Drawable" 0
)
To start the script, 'cd' to the directory (which is %userprofile%\pictures) containing the source image 'p.jpeg' and invoke:
"C:\Program Files\GIMP 2\bin\gimp-2.10.exe" -idf -b '(mytest p.jpeg p1.jpeg)' -b '(gimp-quit 0)' --verbose
I am expecting 'p1.jpeg' being an exact copy of 'p.jpeg' to be written out in the same directory.
What happens: A protocol window opens, containing:
(...)
Starting extension: 'extension-script-fu'
No batch interpreter specified, using the default 'plug-in-script-fu-eval'.
batch command executed successfully
batch command executed successfully
Then it stays open. No error messages. But no output file either.
If I missspell the function name 'mytest' or pass a non-existing file name as the first argument (something.jpeg), I won't receive an error message.
I got rid of the message 'No batch interpreter specified' by adding --batch-interpreter plug-in-script-fu-eval.
I tried:
reinstalled Gimp
alternativly on a clean Windows 11 Pro 21H2 22000.795
different directories for the source/dest. image file
different image formats (.png, .jpeg) and files
command window as elevated admin and as normal user
a different script (https://opensource.com/article/21/1/gimp-scripting)
with and without the block 'script-fu-register'
file parameter with and without quotation marks, full path
executing all commands from the command line using -b '(let* ((image (car (gimp-file-load RUN-NONINTERACTIVE p.jpeg p.jpeg)))(drawable (car (gimp-image-get-active-layer image))))(gimp-file-save RUN-NONINTERACTIVE image drawable p1.jpeg p1.jpeg)(gimp-image-delete image))'
Finally I got it working using the following command line syntax on Windows:
"C:\Program Files\GIMP 2\bin\gimp-2.10.exe" -idf -b "(mytest \"p.jpeg\" \"p1.jpeg\")" -b "(gimp-quit 0)"
Double quotes " arround each -b command
Escaped double quotes \" before and after each parameter.
Related
ParseRat is an old program that I have had a long time. I need to transpose text files in c:\wherefilesare.
I run the below and it just dies:
echo on
setlocal EnableDelayedExpansion
cd c:\wherefilesare
SET progdir=C:\program files (x86)\ParseRat
for%%x in (*.txt) do ("%%progdir%\parserat.exe" "%%x.txt" "%%progdir%\test.prz" "%%x.csv"
As #Squashman says:
"You (have) an extra percent symbol for all your (environment) variables. You are also not using the FOR meta-variable correctly. Essentially %%x expands to the actual file name with the extension. So it will see file1.txt.txt and file1.txt.csv. You need to use the command modifiers. %%~nx to get just the file name without the extension."
Also, you are missing a closing parenthesis...
echo on
setlocal EnableDelayedExpansion
cd c:\wherefilesare
SET progdir=C:\program files (x86)\ParseRat
for %%x in (*.txt) do (
"%progdir%\parserat.exe" "%%~nx.txt" "%progdir%\test.prz" "%%~nx.csv"
)
I use windows 7 pro service pack 1.
I have the following code in the post build event :
SET VAR1=BLABLA
ECHO %VAR1% > Test.txt
It wont work. In the file, i get «command echo activated» (translated from french).
Embarcadero documentation says that i can use any valid dos command in those events.
If i just use :
ECHO BLABLA > Test.txt
It works, no problem. Is this a bug or there is a problem with % character ? % is an ascii char so i dont even know what could be the problem.
ty for your help.
% is used in cmd to delimit variablenames when the value of the variable is required, hence echo %var1% > test.txt will write the current value of the environment variable var1 to the file.
If var1 is not defined at the time, it will report the echo status (Echo is on/off`.
This can be circumvented by using echo(%var1% - the ( modifies echo's behaviour to not report the echo status if the arguments are resolved to nothing.
If you want to echo a literal % then you need to escape the % with another %. cmd normally uses ^ to escape symbols with a special meaning - % is the exception; %% to echo a literal %.
BTW - the space between the string to be echoed and the redirector will be output to the file. To prevent this, use > test.txt echo %var1% Note that > creates a file anew. >> will create or append if the file already exists. The space between the redirector and the filename is optional.
However, it's important when using batch to post exactly the code that's in use.
SET VAR1=BLABLA
ECHO %VAR1% > Test.txt
will work happily.
SET VAR1 = BLABLA
ECHO %VAR1% > Test.txt
will not because this latter code sets a variable named "var1Space"
On my 10.2.1 system, I've tried the code as published.
The actual code that's executed is
SET VAR1=BLABLA&ECHO %VAR1% > Test.txt
not
SET VAR1=BLABLA
ECHO %VAR1% > Test.txt
as shown in the "Build events commands" window.
This will not work because the entire line is executed as published on the "build events" page - SET VAR1=BLABLA&ECHO %VAR1% > Test.txt which will be interpreted by cmd after cmd performs its standard parsing routine.
cmd replaces any %var% with the actual value at parse time, not at run time hence as var1 has no value when the line SET VAR1=BLABLA&ECHO %VAR1% > Test.txt is parsed, the code is executed as SET VAR1=BLABLA&ECHO > Test.txt hence the problem encountered.
To cure this, you need to use
SET VAR1=BLABLA&call ECHO %%VAR1%% > Test.txt
where cmd will execute the parsed-ECHO command in a subshell. % is the escape character for % so the subshell executes ECHO %VAR1% > Test.txt after var1 has been set.
I'd suggest you raise this as a problem with EMBT. Batch commands cannot be strung together with & without side-effects. The code entered into the "Build events commands" window should be executed without reformatting - just written to a (temporary) batch file and the batch file then executed.
No doubt the eager downvoters will support the resolution of this problem.
How we can generate FortiFy report using command ??? on linux.
In command, how we can include only some folders or files for analyzing and how we can give the location to store the report. etc.
Please help....
Thanks,
Karthik
1. Step#1 (clean cache)
you need to plan scan structure before starting:
scanid = 9999 (can be anything you like)
ProjectRoot = /local/proj/9999/
WorkingDirectory = /local/proj/9999/working
(this dir is huge, you need to "rm -rf ./working && mkdir ./working" before every scan, or byte code piles underneath this dir and consume your harddisk fast)
log = /local/proj/9999/working/sca.log
source='/local/proj/9999/source/src/**.*'
classpath='local/proj/9999/source/WEB-INF/lib/*.jar; /local/proj/9999/source/jars/**.*; /local/proj/9999/source/classes/**.*'
./sourceanalyzer -b 9999 -Dcom.fortify.sca.ProjectRoot=/local/proj/9999/ -Dcom.fortify.WorkingDirectory=/local/proj/9999/working -logfile /local/proj/working/9999/working/sca.log -clean
It is important to specify ProjectRoot, if not overwrite this system default, it will put under your /home/user.fortify
sca.log location is very important, if fortify does not find this file, it cannot find byte code to scan.
You can alter the ProjectRoot and Working Directory once for all if your are the only user: FORTIFY_HOME/Core/config/fortify_sca.properties).
In such case, your command line would be ./sourceanalyzer -b 9999 -clean
2. Step#2 (translate source code to byte code)
nohup ./sourceanalyzer -b 9999 -verbose -64 -Xmx8000M -Xss24M -XX:MaxPermSize=128M -XX:+CMSClassUnloadingEnabled -XX:+UseConcMarkSweepGC -XX:+UseParallelGC -Dcom.fortify.sca.ProjectRoot=/local/proj/9999/ -Dcom.fortify.WorkingDirectory=/local/proj/9999/working -logfile /local/proj/9999/sca.log -source 1.5 -classpath '/local/proj/9999/source/WEB-INF/lib/*.jar:/local/proj/9999/source/jars/**/*.jar:/local/proj/9999/source/classes/**/*.class' -extdirs '/local/proj/9999/source/wars/*.war' '/local/proj/9999/source/src/**/*' &
always unix background job (&) in case your session to server is timeout, it will keep working.
cp : put all your known classpath here for fortify to resolve the functiodfn calls. If function not found, fortify will skip the source code translation, so this part will not be scanned later. You will get a poor scan quality but FPR looks good (low issue reported). It is important to have all dependency jars in place.
-extdir: put all directories/files you don't want to be scanned here.
the last section, files between ' ' are your source.
-64 is to use 64-bit java, if not specified, 32-bit will be used and the max heap should be <1.3 GB (-Xmx1200M is safe).
-XX: are the same meaning as in launch application server. only use these to control the class heap and garbage collection. This is to tweak performance.
-source is java version (1.5 to 1.8)
3. Step#3 (scan with rulepack, custom rules, filters, etc)
nohup ./sourceanalyzer -b 9999 -64 -Xmx8000M -Dcom.fortify.sca.ProjectRoot=/local/proj/9999 -Dcom.fortify.WorkingDirectory=/local/proj/9999/working -logfile /local/ssap/proj/9999/working/sca.log **-scan** -filter '/local/other/filter.txt' -rules '/local/other/custom/*.xml -f '/local/proj/9999.fpr' &
-filter: file name must be filter.txt, any ruleguid in this file will not be reported.
rules: this is the custom rule you wrote. the HP rulepack is in FORTIFY_HOME/Core/config/rules directory
-scan : keyword to tell fortify engine to scan existing scanid. You can skip step#2 and only do step#3 if you did notchange code, just want to play with different filter/custom rules
4. Step#4 Generate PDF from the FPR file (if required)
./ReportGenerator -format pdf -f '/local/proj/9999.pdf' -source '/local/proj/9999.fpr'
I want to convert all my PNGs to PNG using ImageMagick (I need this because AndroidStudio has some issue with the original PNGs. ImageMagick is able to fix this issue by re-exporting the PNG.)
If I do: convert a.png a.png it works.
But how do I do this for many files (including files from sub directories)?
For Windows users -- you can try this in a cmd.exe window:
for %i in (*.png *\*.png *\*\*.png *\*\*\*.png) do (
convert.exe %i %~pni---repaired.png
)
This will loop through the current dir's PNGs as well as the ones in the sub directories 3 levels deep.
You have to make sure that your convert.exe really is the one from ImageMagick -- set up your environment variable %PATH% accordingly. Otherwise you may run into an error when the command wants to use the identically named disk format conversion convert.exe command.
If unsure, use the full path to the IM convert.exe, e.g.:
D:\programs\imagemagick-install-dir\convert.exe %i %~pni---repaired.png
Also, remember: If you put the above command into a *.bat file, you have to double up each occurrence of %. So %i from the direct command becomes %%i in the batch file!
If you are on Vista/Windows7/2008/8 (or on Windows XP with the Resource Kit installed) you'll have the ForFiles.exe available, which can be used to loop through files:
forfiles.exe ^
/p <path> ^
/m *.png ^
/s ^
/C "convert.exe #file #fname---repaired.png"
Try this command. Start it from the top-most directory from where you want to convert all images:
find . -name "*.png" \
| while read image; do \
convert "${image}" "${image/.png/---repaired.png}
done
Caveats: Should you have PNG files with the suffix .PNG or .pNg or similar, the command will not work for these. For such cases, the command needs some modifications...
I can't figure out how to get my audio extractor script working via commandline arguments on ahk. I know the command line argument is correct, as I'm able to get it working through a batch file, but I keep getting the error below. I think I'm probably doing something wrong syntactically but I just can't figure out what.
I'd really appreciate any help. Thanks.
Error: the following variable name contains an illegal character"
channels=2,samplerate=44100}:standard{access="file",mux=dummy,dst="%A_LoopField%.mp3"}
Code:
fileselectfile, File_Name, M3
SplitPath, File_Name, name
Loop, parse, name, `n
if a_index = 2
{
msgbox, %A_LoopField%
Run, "C:\Program Files\VideoLAN\VLC\vlc.exe" "-I dummy -v %File_Name% :sout=#transcode{vcodec=none,acodec=mp3,ab=128,channels=2,samplerate=44100}:standard{access="file",mux=dummy,dst="%A_LoopField%.mp3"}"
}
Here is the original batch code if you're curious about the audio extraction function I was talking about
#ECHO OFF
REM Loop through files (Recurse subfolders)
REM Syntax
REM FOR /R [[drive:]path] %%parameter IN (set) DO command
REM
REM Key
REM drive:path : The folder tree where the files are located.
REM
REM set : A set of one or more files. Wildcards must be used.
REM If (set) is a period character (.) then FOR will
REM loop through every folder.
REM
REM command : The command(s) to carry out, including any
REM command-line parameters.
REM
REM %%parameter : A replaceable parameter:
REM in a batch file use %%G (on the command line %G)
FOR /R %%G IN (*.mp3) DO (CALL :SUB_VLC "%%G")
FOR /R %%G IN (*.mp3.mp*) DO (CALL :SUB_RENAME "%%G")
GOTO :eof
:SUB_VLC
SET _firstbit=%1
SET _qt="
CALL SET _newnm=%%_firstbit:%_qt%=%%
SET _commanm=%_newnm:,=_COMMA_%
REM echo %_commanm%
ECHO Transcoding %1
REM Here's where the actual transcoding/conversion happens. The next line
REM fires off a command to VLC.exe with the relevant arguments:
CALL "C:\Program Files\VideoLAN\VLC\vlc" -I dummy -v %1 :sout=#transcode{vcodec=none,acodec=mp3,ab=128,channels=2,samplerate=44100}:standard{access="file",mux=dummy,dst="%_commanm%.mp3"} vlc://quit
REM Having no SLEEP-esque command, we have to trick DOS/Windows into pausing
REM for a bit between encode ops - To give the host OS a chance to do what it
REM needs to - Via clever use of the PING utility:
REM (Thanks to http://www.computing.net/answers/programming/dos-command-for-wait-5-seconds/11192.html for the tip! :-)
PING -n 1 -w 10000 1.1.1.1 > NUL
GOTO :eof
:SUB_RENAME
SET _origfnm=%1
SET _endbit=%_origfnm:*.mp3=%
CALL SET _newfilenm=%%_origfnm:.mp3%_endbit%=.mp3%%
SET _newfilenm=%_newfilenm:_COMMA_=,%
COPY %1 %_newfilenm%
GOTO :eof
:eof
REM My own little addition to prevent the batch window from "vanishing" without
REM trace at the end of execution, as if a critical error had occurred.
PAUSE
Have you tried without the SplitPath, File_Name, name? I got rid of the error like this, but I don't know if it produces the result you want in the end.
I found the answer. I was making syntatical errors I just didn't have the knowledge to fix myself. The new RUN statement works perfectly.
Here is the newly revised script
fileselectfile, File_Name, M3
SplitPath, File_Name, name, dir, ext, name_no_ext, drive
StringReplace, File_Name, File_Name,`n, \
Loop, parse, name, `n
{if a_index = 2
msgbox, %A_LoopField%
Run % "C:\Program Files\VideoLAN\VLC\vlc.exe -I dummy -v """ File_Name """ :sout=#transcode{vcodec=none,acodec=mp3,ab=128,channels=2,samplerate=44100}:standard{access=""file"",mux=dummy,dst=""" A_LoopField ".mp3""} "
}