I am interested in any information about or experiences with deploying PowerApps solutions to new environments within the same tenant.
In my solution I have a canvas-app and several flows between the app and sharepoint. I have used connection references to all connections (sharepoint, mail, etc.). On the devops side I have a build pipeline from my development environment, very much in line with Microsoft's recommendations for ALM. In addition, I have a release pipeline to publish the solution in another environment, e.g. a test environment. I can publish the release but when I access the solution in the new environment all flows have been turned off and all connections to sharepoint have been severed. When I inspect the flows it throws an error that it was unable to locate the connection Id. What strikes me as odd here is that the connection references that are visible in the new solution cannot be selected. However, what I can do is to add a new connection (from each flow), whereafter I can turn the flow back on and activate each of them in the canvas app.
What I am asking for here, is any documentation, guide, tutorial, help, etc. to make this release a little more automatic, so I won't have to re-add connections for every single action from each of my flows.
I think you are in luck 😊 and you should check out the latest PA community call. I think the last demo is the thing you are looking for (especially from that moment I suppose🤔) and is now one of the targets in Power Platform.
If you are considering to introduce source control as well (like git), currently there is a cool experiment going on in the community in that direction which I think is quite promising and you may check this article. But please consider this pack/unpack tool as an experiment and don't just remove the original .msapp files yet 😉.
I think I have finally found a working solution. I'll document my steps here for other ALM hopefuls.
When pushing to the target environment for the first time I need to click on each of the connection references, click on solutions layers, ) use the breadcrumb path to go one step back ] and from here I can assign the correct connection. Subsequent deployments now work without any hassle.
Also, first time deployment, I have learned cannot activate workflows. However, future deployments can activate workflows by managing the setting the the Import Solution build tool
There is a number of issues logged on stackoverflow about a Windows Service that does not appear in the Windows Services Manager.
A number of solutions suggest that you use InstallUtil.
When I run my setup project, my service does not appear in Windows Services, but when I run InstallUtil it does appear.
At least that tells me my project is okay, and the problem is with the setup project.
A good post from here talks about adding Custom Functions. I'm using Visual Studio 2013 and the default InstallShield setup project, and I do not see those options in my project.
Anything specifically that I have to change in the setup project so that it works as well to display the project in Service Manager?
Make sure you have done this custom step:
1.In Solution Explorer, right-click the setup project, point to View, then choose Custom Actions. The Custom Actions editor appears.
2.In the Custom Actions editor, right-click the Custom Actions node and choose Add Custom Action. The Select Item in Project dialog box appears.
3.Double-click the application folder in the list box to open it, select primary output from MyNewService (Active), and click OK. The primary output is added to all four nodes of the custom actions � Install, Commit, Rollback, and Uninstall.
4.Build the setup project.
The Application Data folder for Visual Studio could not be created, this is the problem showing in my Jenkins. Before it works, all of sudden it is not working now after restarting the machine. I tried all the ways given in on-line and given in the below document too.
http://saurabharorablog.blogspot.ca/2012/06/solution-application-data-folder-for.html
Could anyone help me. Thanks in advance.
We solved this issue by simply running Visual Studio as an Administrator. This created the necessary folders and we were able to use it normally n all scenarios after that, including in Jenkins.
Key is: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders]
Entry inside this is ‘AppData’ which had the value %APPDATA%.
Then I changed it to this value %USERPROFILE%\AppData\Roaming
Then all the applications started working as usual. I wish any of you who find similar error message could use this solution to fix it.
[NOTE: The following link is broken from the US. Perhaps other locations as well. It should not be clicked as the site it reaches does not appear safe.]
Ref:http://tutewall[do not use]com/application-data-folder-for-visual-studio-could-not-be-created/
In TFS I have a started a Scrum project, but I want to add some fields to a Work Item.
So I'm following this tutorial on how to add Estimate and Completed work hour fields to a Work Item.
I added one field in the layout, like shown in the tutorial. But when I try to save it I then get the following error:
TF237113: You don't have enough permissions to complete the import operation.
I think I have all the needed permissions. I changed all my user permissions and also the permissions I have in the TFS project that I'm working on.
But so far no luck. Even when I try to add a field in the Layout tab that already exists, then it still gives me that error. Anyone any idea what I can try to solve this error?
It looks like you're using Visual Studio Online (Since I can see that you have a Windows Live ID), Visual Studio Online doesn't support process template customization at all at the moment. This is due to the fact that they release new versions of the service every 3 weeks or so, and having to consolidate and test all customization across all projects would be a major pain.
It seems that all of the initial Google results for "using subversion with xcode" are actually just tutorials for installing and configuring svn and Xcode, as opposed to actually using the two (i.e. interacting with svn via Xcode's GUI).
Is anyone aware of a good guide that teaches the tricks and pitfalls of working with svn via Xcode's GUI? Something that bridges the gap between the most excellent Version Control with Subversion book and the Xcode IDE (as in pure Xcode GUI without any terminal command use)?
Edit:
We all love our terminal commands, and we all love Eclipse but (and I mean this in the nicest possible way) neither is really the point of the question. I’d prefer to use svn via Xcode’s IDE instead of via terminal just as I prefer (well, for this case) to code in Xcode’s IDE instead of using vim and gcc. Apple engineers spent a good bit of time implementing that SCM menu in Xcode; someone has to have seen a usage guide somewhere.
I used this page as a reference for setting up my XCode projects with SVN. It is a good starting point, but I'll give a short walkthrough of what I did (since the page isn't really all that helpful!).
A couple notes: I'm using XCode 3.1.2 and Subversion 1.4.2. I've heard of problems with using SVN 1.5, but there are ways around that which I wont get into.
First off, I had a repository already set up and created the XCode project afterwards.
In XCode you need to set it up to know about your repository using the SCM tab in the preferences window. Enter:
A Name (this is arbitrary and used for reference with XCode)
The scheme (http or svn)
The host (i.e. svn.example.com)
The path (the exact path to the SVN repository located on the host)
The port (only if it isn't the default)
And a username and password used to access the repository.
The URL will be auto-filled as you enter the other fields. Hit "OK" when all the fields are good and XCode says it can connect.
Then open your project and do a "Get Info" (Round blue icon with an exclamation mark) on the project itself. Under the "General" tab down at the bottom is an option for SCM, select the repository you made in 1 and close the window.
Now open SCM in the menu-bar and go to "Repositories." Hopefully you've built your repository right using branches, trunk, and other directories at the base level because XCode doesn't have support for checking out the root directory. So go one directory at a time down the list and click the "Checkout" button and select a directory to check it out to (I recommend a "Code" or "Source" or "SVN" directory inside your XCode project directory). You cannot checkout multiple directories at once, but you can tell the next directory to checkout before the first has finished and XCode with queue the commands.
Once that is all done go back to your XCode project window and "Add -> Existing Files..." to your project. Select the directory you've checked out the repository to and I recommend using the "Create folder references" option instead of the "Recursively create groups" option because added and removed items will be automatically reflected in a Folder Reference but not in a Group.
Now you've imported your SVN repository into an XCode project. From here any time you make a change, simply Right-Click (Control-Click if you only have 1 button) in the file and at the bottom of the context menu are the SCM options for comparing, committing, updating, and discarding (reverting) the file. You can also use the SCM menu in the menubar for file or project-wide updates/commits/reverts.
I second the comment by the_mandrill, SVN support from within XCode is very limited, especially if you're used to Eclipse.
I also don't understand why everyone seems to need visual clients. I keep a terminal window open on my project directory and I have no problems interacting with SVN from the command line.
I know this is not quite what you asked, but I wouldn't rely much on the use of SVN from Xcode as what you can do with it is very limited. It's useful for being able to do a diff or annotate direct from the IDE but not a great deal else. I don't think it's any substitute for using a separate standalone client such as SmartSVN or Versions.
You also have to jump through a number of hoops to get Xcode to work with SVN version 1.5 onwards, so that's something to be aware of before installing a standalone client. If in doubt, check out a sandbox first.
Here is one of the best tutorials to configure subversion in XCode - http://iphonedevelopment.blogspot.com/2009/03/version-control-is-your-friend.html
It also teaches even to create repository in local MAC.
if you want to work with svn through a gui interface then i suggest you use eclipse + subclipse plugin (which have more features and much more reliable and easy than svn on xcode)..
you will work in xcode as normal but you will use eclipse only as an svn client (by creating a general project in eclipse and make it points to your xcode project directory )
and here is a tutorial of how to install subclipse
A lot of people have problems using the build in svn client, especially to get a new project into svn and that it works.
I created a straight foreward tutorial on how to do this, along with a very well known pitfall (works for Xcode up till the latest version of xcode incl. Iphone 4 sdk)
http://www.sodeso.nl/?p=599
I myself looked up for some good resources and one of the best I've found is a quite recent video from the WWDC 2012 :
Sign in here if it's not already the case : https://developer.apple.com/videos/wwdc/2012/
Then there is a video called :Session 411 - Source Control Management in Xcode
It explains how to use version control both with GIT and Subversion. It's really nice !
Hope it helps!
As has been mentioned in many other answers, the svn client with Xcode is quite weak (and that is being kind).
Personally, I think that running Eclipse just to get access to a svn client is a bit heavy handed.
I would suggest two answers:
Use a dedicated svn client for the Mac (Versions and Cornerstone are both very good, albeit not free... there are free ones, such as svnX)
If you are not wildly comfortable with the terminal, you can script a couple of the key commands that you want to use and add them to your Xcode user scripts folder, then you can trigger them from a menu item of from a keystroke, just as if you were using the Xcode native client. There's a ton of examples on how to do this available via Google.
I came across these - no idea how well they work, but wanted to add some resources if I could:
http://www.macresearch.org/tutorial-introducing-xcode-30-organizer
http://developer.apple.com/tools/subversionxcode.html
With XCode4 you can perform almost all of your SCM tasks from within the IDE itself, this is a great step forward.
Here is a link to the official guide :
http://developer.apple.com/library/mac/#documentation/ToolsLanguages/Conceptual/Xcode4UserGuide/SCM/SCM.html#//apple_ref/doc/uid/TP40010215-CH7-SW26
Unfortunately you still have to use the Terminal command line to add a new project to SCM, this is also clearly documented in the link above.
What it does not tell you is that you also need to manually add ignore instructions to your SCM configuration otherwise you are going to end up with user settings and build outputs in your repositories. I am currently figuring out the list and I will update this answer once I have it finalised.
PS :
I know this question is quite old now but I have added this for those of you who arrive here looking for answers like I did.
PPS :
Terminal command line increases probability of human error, takes longer, is more complex and is less transparent to end users. Overall the omission of being able to add projects to SCM from within XCode is poor design, I expected better from Apple who are usually good at simplifying UI. For the command line fans out there you might feel L337 but try managing a team of programmers and being responsible for their code, command line is not your friend.