I have a document that has a handful of figures in it, and I am using
\tcbox{\includegraphics{./Pictures/image-name.png}}
to put a border around them. I end up repeating this for every image though. Is there a way to put something at the top of my document that says to apply this to all images?
If nothing else in your document relies on \includegraphics, you could try the following redefinition:
\documentclass{article}
\usepackage[most]{tcolorbox}
\let\includegraphicsold\includegraphics
\renewcommand{\includegraphics}[2][]{\tcbox{\includegraphicsold[#1]{#2}}}
\begin{document}
\includegraphics[width=10cm]{example-image-duck}
\end{document}
Related
I want to fit my image in the Overleaf but the output result is not as expected.
The overleaf code i used is as:
\begin{figure}[htb]
\includegraphics[width=\textwidth,height=\textheight,keepaspectratio]{Fig2.png}
\label{Fig1}
\end{figure}
\begin{figure}[htb]
\includegraphics[scale=0.5]{Fig_3.png}
\label{Fig2}
\end{figure}
However my image is coming on top of the text of the other sections, any solutions are appreciated.
Note: The Image needs the whole page width to be accommodated
Try \pagebreak before and/or after images.
The next option is to replace [htb] with [!h].
I have a LaTeX document with a figure and references to it:
\begin{figure}
...
\caption{...}
\label{fig:1}
\end{figure}
\ref{fig:1}
I use the hyperref package to get hyperlinks in the resulting PDF.
However the link to the figure navigates to the caption leaving the figure itself out of the view. How can I make it navigate to the start of the figure instead without moving the caption to the top?
Add this in your preamble
\usepackage{hyperref}
\usepackage[all]{hypcap} %for going to the top of an image when a figure reference is clicked
Make sure that the \usepackage[all]{hypcap} is written after the hyperref package is imported.
To previous comment:
\usepackage{hyperref}
\usepackage{caption}
is slightly better than \usepackage[all]{hypcap} because when you use e.g. figure without captions there won't be a compilation problem. The caption package by default sets option
hypcap=true
anchoring hyperlinks to the beginning of an environment.
\usepackage{hyperref}
\usepackage{caption}
Using this is a better idea than \usepackage[all]{hypcap}.
On one particular frame I would like to remove the shadow that the theme I am using inserts under the title. The reason is that with a black background (which I use only on this frame), it looks quite ugly.
Do you have any idea can I do that? I've managed to remove the shadow under a block environment, thanks to:
\setbeamertemplate{blocks}[rounded]%
[shadow=false]
but I could not find a similar thing for \titleframe (except one that you can only put in your preamble - which would not help, in my case).
Thank you very much for your help.
Those interested will find two working solutions here:
https://tex.stackexchange.com/questions/3139/beamer-how-to-remove-shadow-under-the-title-on-a-given-frame
I personally prefer the one that fixes the way shadowing works but a way to remove it is also proposed.
NB: sorry, I am not yet allowed to add a comment (but as this is an answer, I guess it's fine).
Another possibility is to use beamer version 3.51 (exactly this version, not newer, not older) with pdflatex. This is the one unique version in which the problem with shadow does not exist:
\documentclass{beamer}
\usetheme{Warsaw}
\setbeamercolor{background canvas}{bg=black}
\begin{document}
\begin{frame}
\titlepage
\end{frame}
\end{document}
I want to insert a .jpg image(that is in my current folder, where the .tex file is) after a paragraph. How can I do it in Latex? What should I include / what commands should I use?
You need to use a graphics library. Put this in your preamble:
\usepackage{graphicx}
You can then add images like this:
\begin{figure}[ht!]
\centering
\includegraphics[width=90mm]{fixed_dome1.jpg}
\caption{A simple caption \label{overflow}}
\end{figure}
This is the basic template I use in my documents. The position and size should be tweaked for your needs. Refer to the guide below for more information on what parameters to use in \figure and \includegraphics. You can then refer to the image in your text using the label you gave in the figure:
And here we see figure \ref{overflow}.
Read this guide here for a more detailed instruction:
http://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions
if you add a jpg,png,pdf picture, you should use pdflatex to compile it.
I have a question on inserting images into a LaTeX document. I try to insert images using the keyboard short cut: Ctrl-Alt-G and I'm able to insert images. But the compiled pdf document shows all the images at the end, whereas I want to interleave images with text. Something like the following:
Text1
Image1
Text2
Image2
Text3
Image3
I try to insert images at right positions i.e. in between text, but on compilation, they all appear at the end. I have tried different options provided on the image insertion UI but same result.
Any idea where I'm going wrong.
Related SO question.
You'll have to use graphicx package:
\usepackage{graphicx}
and then you just use \includegraphics
\includegraphics{myfig.pdf}
\includegraphics[width=60mm]{myfig.png}
\includegraphics[height=60mm]{myfig.jpg}
\includegraphics[scale=0.75]{myfig.pdf}
\includegraphics[angle=45,width=52mm]{myfig.jpg}
Try downsizing the images. Maybe they are too large and so they are moved to the end of the document..
Hope it helps.
What code did you use for the \figure environment? In most cases the "h" option should at least help a little bit there.
This is a FAQ: "Moving tables and figures in LaTeX". Note especially the third dot point, which relaxes some of the restrictions LaTeX uses to position floats.
That's the best answer I can give without seeing an example of how large your floats are and how you're inserting them into the document. Provided that they're reasonably-sized, you should have no problem with
\begin{figure}[htbp]
\includegraphics{myfig}
\caption{...}
\label{fig:myfig}
\end{figure}
And note that if the float is too large to fit then it will move to a subsequent page -- this is the whole idea behind getting LaTeX to help you with the formatting. You certainly don't want to end a page prematurely just because there's a figure coming up next that otherwise doesn't fit.
Maybe this can help you in general...I just hate the LaTeX way of making everything too advanced (flexible) at all times.
Beside, the source looks really awful.
It will not solve you initial problem, but since it will be easier to change size of each image you can at least try...
% Easy image insert
% use as \img{imagename}{caption}{label}
% will insert image with with 70% of textwidth
% change below for other width
\newcommand{\img}[3]{
\begin{figure}[!ht]
\centering
\includegraphics[width=0.7\textwidth]{#1}
\caption{#2}
\label{fig:#3}
\end{figure}
}
\img{myimage}{has this caption}{and_this_label}
the label is automatically prefixed with fig:.
Good luck!
/C
Using [!t] and [!h] in the figure environment, rather than [t], [h] etc seems to help, though I've yet to find a surefire way to get large images in sensible places. Sometimes it works half way through a document, othertimes it doesn't.
Sometimes just changing the width or height using an option to the includegraphics statement (square brackets before the filename a.k.a \includegraphics[width=foo]{}) will do the trick.
\begin{figure}[H!]
\includegraphics{myfig}
\caption{...}
\label{fig:myfig}
\end{figure}
Use H! to denote that you want your picture right there.
\documentclass{article}
\usepackage{graphicx}
\begin{document}
text
\begin{figure}[tbh]
\centering
\includegraphics[width=0.4 \textheight]{ & directory path of jpg. width defines the width of the page and one one can put in its place height which is text page height }
\caption{name of the jpg}
\end{figure}
% it worked for me.
\end{document}