When I try to install buildozer kivy dependencies in Ubuntu 18.04, it gives me an error that these packages are not in the store, even though I have updated, I tried on several other Ubuntu types, but I did not get an answer.
I have installed Ubuntu on Windows 10.
The installation code of my packages are as follows:
sudo apt install -y git zip unzip openjdk-13-jdk python3-pip autoconf libtool pkg-config zlib1g-dev libncurses5-dev libncursesw5-dev libtinfo5 cmake libffi-dev libssl-dev
Thank you very much for any help
Related
I am trying to run Drupal on DDEV. In an administrative window, I installed mkcert v1.4.4. I have successfully installed Docker, Ubuntu 2204.1.6 and DDEV. When I run sudo apt-get update && sudo apt-get install -y certutil xdg-utils in Ubuntu, I receive the message E: Unable to locate package certutil
I tried to install certutil using apt-get install libnss3-tools, and it also seemed to work, but I am STILL getting the error message when I attempt to install the xdg utilities.
I am using WSL2 on a Windows machine.
This is a mistake in the docs. It should be libnss3-tools, so sudo apt-get update && sudo apt-get install -y libnss3-tools xdg-utils (certutil is installed by libnss3-tools)
running script: $rvm install ruby.
Tried some similar solutions and installed the packages manually using:
eg: for the library.
$ sudo apt update && apt-cache policy libncurses5-dev
and it worked. The problem is also that it is not detected with the default automatic install.
I am trying to install php7.4 and related packages with below commands
FROM ubuntu:16.04
RUN apt update \
&& apt install -y software-properties-common\
&& add-apt-repository ppa:ondrej/php \
&& apt-get update \
&& apt-get install -y php7.4
I get the below message
Reading package lists...
Building dependency tree...
Reading state information...
E: Unable to locate package php7.4
E: Couldn't find any package by glob 'php7.4'
E: Couldn't find any package by regex 'php7.4'
on searching with
apt-cache search php7
I see that only 7.0 related packages are available
php7.0 - server-side, HTML-embedded scripting language (metapackage)
php7.0-cgi - server-side, HTML-embedded scripting language (CGI binary)
php7.0-cli - command-line interpreter for the PHP scripting language
php7.0-common - documentation, examples and common module for PHP
php7.0-curl - CURL module for PHP
I am confused why I am not getting the newer versions as 7.3, 7,4 and 8 should be the only ones available today. How can I get php7.4 packages?
TL;DR: Since Ubuntu 16.04 reached "End of Standard Support", packages for it were removed from the PPA.
You might want to read this: https://github.com/oerdnj/deb.sury.org/issues/1567
In April 2021, Ubuntu 16.04 Xenial will reach End of Standard Support and will be available only as a paid option through Ubuntu Extended Security Maintenance.
What does it mean for DEB.SURY.ORG PPAs?
The packages for Ubuntu 16.04 will be deleted shortly after the EoL/EoSS is announced, usually at the same time as the next PHP release is published because it's not possible to build the packages any more.
The packages for Ubuntu 16.04 will be available via PHP LTS by Freexian paid program. This is cheaper option than previously announced Private dedicated repositories.
FROM ubuntu:20.04
RUN apt-get update
RUN apt-get install -y wget tar make
RUN wget https://www.php.net/distributions/php-7.4.33.tar.gz --no-check-certificate
RUN tar xzf php-7.4.33.tar.gz
RUN cd php-7.4.33
RUN apt-get update
RUN apt-get --assume-yes install gcc
RUN apt-get -y install expect
RUN apt-get -y install pkg-config
RUN apt-get --assume-yes install -y libsqlite3-dev
RUN apt-get --assume-yes install -y libxml2-dev
RUN ./php-7.4.33/configure
RUN make
RUN make install
CMD ["/bin/bash"]
Install PHP 7.4 on Ubuntu 20.04
NOTE: Ubuntu 20.04 ships with PHP 7.4 in its upstream repositories. Just install it and the extensions you with the apt package manager.
sudo apt update
sudo apt install php php-cli php-fpm php-json php-common php-mysql php-zip php-gd php-mbstring php-curl php-xml php-pear php-bcmath
Confirm PHP version:
$ php --version
PHP 7.4.3 (cli) (built: Mar 26 2020 20:24:23) ( NTS )
Copyright (c) The PHP Group
Zend Engine v3.4.0, Copyright (c) Zend Technologies
with Zend OPcache v7.4.3, Copyright (c), by Zend Technologies
Install PHP 7.4 on Ubuntu 18.04/16.04
Step 1: Add PHP PPA Repository
We’ll add ppa:ondrej/php PPA repository which has the latest build packages of PHP.
sudo apt-get update
sudo apt -y install software-properties-common
sudo add-apt-repository ppa:ondrej/php
sudo apt-get update
Step 2: Install PHP 7.4 on Ubuntu 18.04/19.04/16.04
Install PHP 7.4 on Ubuntu 18.04/19.04/16.04 using the command:
sudo apt -y install php7.4
Check version installed:
$ php -v
PHP 7.4.0beta4 (cli) (built: Aug 28 2019 11:41:49) ( NTS )
Copyright (c) The PHP Group
Zend Engine v3.4.0-dev, Copyright (c) Zend Technologies
with Zend OPcache v7.4.0beta4, Copyright (c), by Zend Technologies
Use the next command to install additional packages:
sudo apt-get install php7.4-xxx
Example:
sudo apt-get install -y php7.4-{bcmath,bz2,intl,gd,mbstring,mysql,zip,common}
PHP configurations related to Apache is stored in /etc/php/7.4/apache2/php.ini
I hope my experience help you guys
I was trying many ways in order to install Erlang 17.3 on Ubuntu 18. So far I came up with this solution you can read below:
For installation Erlang 17.3 on Ubuntu 18 you should do the following things:
Enter in the console next command:
Download the tar file:
wget http://erlang.org/download/otp_src_17.3.tar.gz
Extract the tar file in directory where you download the otp_src_17.3.tar.gz:
cd '/home/yaroslav/otp_src_17.3'
tar -zxf otp_src_17.3.tar.gz
set export ERL_TOP your 'pwd' path:
export ERL_TOP=pwd
Basic dependencies:
sudo apt-get install autoconf libncurses-dev build-essential
Other applications dependencies
sudo apt-get install m4
sudo apt-get install unixodbc-dev
sudo apt-get install libssl-dev
sudo apt-get -y install libssh-dev
sudo apt-get install libwxgtk3.0-dev libglu-dev
sudo apt-get install fop xsltproc
sudo apt-get install g++
sudo apt-get install default-jdk
sudo apt-get install xsltproc fop
Or all dependencies in one line:
apt-get -y install build-essential autoconf m4 libncurses5-dev libwxgtk3.0-dev libgl1-mesa-
dev libglu1-mesa-dev libpng-dev libssh-dev unixodbc-dev xsltproc fop g++ default-jdk
install openssl version 1.0.2 for Ubuntu 18 (different version SSL is not compatible):
curl https://www.openssl.org/source/openssl-1.0.2l.tar.gz | tar xz && cd openssl-1.0.2l &&
sudo ./config && sudo make && sudo make install
Configure and build:
./configure --with-ssl='/home/yaroslav/otp_src_17.3/openssl-1.0.2l'
sudo make
sudo make install
For installing older versions of Erlang and working with several at the same time I would recommend using kerl
If you need more fancy features you could also head for asdf which has a Erlang plugin (which runs kerl under the hood)
I have downloaded 20170817-tinker-board-linaro-stretch-alip-v2.0.1.img for Tinker Board. I am trying to install OpenCV 3.0.0. I have followed the instructions given here : http://www.pyimagesearch.com/2015/06/22/install-opencv-3-0-and-python-2-7-on-ubuntu/.
I was not able to install libjasper-dev. Hence, instead of libpng12-dev, I have installed libpng.
I am trying to compile OpenCV on Tinker Board since yesterday morning. But have been getting following errors during building process:
/usr/include/c++/6/cmath:106:11: error: ::acos has not been declared
Followed by all the math formula triggers similar errors.
Which Debian version is stable for OpenCV? Should I install a lower version of OpenCV? Can someone help?
I successfully managed to install OpenCV on a TinkerBoard. The following were the steps:
Format a 16 GB memory card to FAT32
Download debian image 20170817-tinker-board-linaro-stretch-alip-v2.0.1.img for tinker board from here.
Copy the img file on to the memory card
sudo dd if=/path/to/your/imgfile of=/path/to/your/memorycard bs=4M
a lot of help on this is already available in SO.
Before powering on ensure that you connect your tinker board to the internet through a lan cable.
Once powered on reset the system time with sudo dpkg-reconfigure tzdata. Debian image for tinker board already has ntp installed. Wait a couple of minutes for the tinker board to adjust the board time from the network.
To install opencv and its dependant library, I have taken the instructions given here ....though I had to make some custom library installations but it was very helpful. Please note, my purpose of using Opencv on Tinker Board is to process live video's and hence my focus was more towards installing appropriate video codecs.
The following were the steps:
sudo apt-get -y update
sudo apt-get -y upgrade
sudo apt-get -y dist-upgrade
sudo apt-get -y autoremove
You may face the following warning messages during installation of perl applications:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.utf8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Though this doesn't impact your installation of OpenCV, after spending 3 days in trying to compile Opencv on tinker board I do not want to leave anything for a chance.
Use the following to suppress these warning messages:
export LANGUAGE=en_US.UTF-8
export LANG=en_US.UTF-8
export LC_ALL=en_US.UTF-8
dpkg-reconfigure locales
Thanks to this post.
# INSTALL THE DEPENDENCIES
# Build tools:
sudo apt-get install -y build-essential cmake
# GUI (if you want to use GTK instead of Qt, replace 'qt5-default' with 'libgtkglext1-dev' and remove '-DWITH_QT=ON' option in CMake): I just went with qt5 itself.
sudo apt-get install -y qt5-default libvtk6-dev
# Media I/O:
sudo apt-get install -y zlib1g-dev libjpeg-dev libwebp-dev libpng-dev libtiff5-dev libopenexr-dev libgdal-dev
Pls note libjasper-dev is unavailable for this version of Debian and hence I have removed from the above Media I/O list.
# Video I/O:
sudo apt-get install -y libdc1394-22-dev libavcodec-dev libavformat-dev libswscale-dev libtheora-dev libvorbis-dev libxvidcore-dev libx264-dev yasm libopencore-amrnb-dev libopencore-amrwb-dev libv4l-dev libxine2-dev
sudo apt-get install -y gstreamer1.0-plugins-*
sudo apt-get install libxine-dev
# Parallelism and linear algebra libraries:
sudo apt-get install -y libtbb-dev libeigen3-dev
# Python:
sudo apt-get install -y python-dev python-tk python-numpy python3-dev python3-tk python3-numpy
sudo apt-get install python-pip
# Java:
sudo apt-get install -y ant default-jdk
# Documentation:
sudo apt-get install -y doxygen
Get OpenCV. I decided to go with version 3.0.0 as my development was in this version. You may choose a different version.
sudo apt-get install -y unzip wget
wget https://github.com/opencv/opencv/archive/3.0.0.zip
unzip 3.0.0.zip
rm 3.0.0.zip
Build OpenCV.
mv opencv-3.0.0 OpenCV
cd OpenCV
mkdir build
cd build
cmake -DWITH_QT=ON -DWITH_OPENGL=ON -DFORCE_VTK=ON -DWITH_TBB=ON -DWITH_GDAL=ON -DWITH_FFMPEG=0 -DWITH_XINE=ON -DBUILD_EXAMPLES=ON -DENABLE_PRECOMPILED_HEADERS=OFF ..
A change here from the original script - is the addition of -DWITH_FFMPEG=0, as FFMPEG library was missing and I was not in a frame of mind to install the same. You may want to do so.
make
Though TinkerBoard supports make -j4 i chose to go slow with make. The compile with make took almost 2.5 hours with lot of seemingly indentation errors in c++ codes but finally the compile gets over.
sudo make install
sudo ldconfig
$ python
>>> import cv2
>>> cv2.__version__
'3.0.0'
After few days finally I got good setup. My post improves the previous answer.
Steps is similar like it was before me, but I changed few strings, because I had different errors.
In my case for new Asus Tinker Board I installed:
20170928-tinker-board-linaro-stretch-alip-v2.0.3
opencv-3.3.0 with opencv_contrib-3.3.0.
First start of tinker board.
sudo apt-get -y update
sudo apt-get -y upgrade
sudo apt-get -y dist-upgrade
It necessary to remove default (old) OpenCV:
sudo apt-get remove libopencv*
sudo apt-get -y autoremove
# INSTALL THE DEPENDENCIES
# Build tools:
sudo apt-get install -y build-essential cmake
# GUI (I had errors with Qt, so I did next)
sudo apt-get install -y libgtkglext1-dev libvtk6-dev
# Media I/O:
sudo apt-get install -y zlib1g-dev libjpeg-dev libwebp-dev libpng-dev libtiff5-dev libopenexr-dev libgdal-dev
# Video I/O:
sudo apt-get install -y libdc1394-22-dev libavcodec-dev libavformat-dev libswscale-dev libtheora-dev libvorbis-dev libxvidcore-dev libx264-dev yasm libopencore-amrnb-dev libopencore-amrwb-dev libv4l-dev libxine2-dev libxine-dev
sudo apt-get install -y gstreamer1.0-plugins-*
# Parallelism and linear algebra libraries:
sudo apt-get install -y libtbb-dev libeigen3-dev
# Python:
sudo apt-get install -y python-dev python-tk python-numpy python3-dev python3-tk python3-numpy
sudo apt-get install python-pip
# Java:
sudo apt-get install -y ant default-jdk
# Documentation:
sudo apt-get install -y doxygen
Get OpenCV.
cd ~
wget -O opencv.zip https://github.com/opencv/opencv/archive/3.3.0.zip
unzip opencv.zip
wget -O opencv_contrib.zip https://github.com/opencv/opencv_contrib/archive/3.3.0.zip
unzip opencv_contrib.zip
Compile and Install OpenCV
cd ~/opencv-3.3.0/
mkdir build
cd build
cmake -DWITH_OPENGL=ON -DFORCE_VTK=ON -DWITH_TBB=ON -DWITH_GDAL=ON -DWITH_FFMPEG=0 -DWITH_XINE=ON -DBUILD_EXAMPLES=ON -DOPENCV_EXTRA_MODULES_PATH=~/opencv_contrib-3.3.0/modules -DENABLE_PRECOMPILED_HEADERS=OFF ..
CMake should start to build your configuration, after a couple of minutes you should see:
-- Configuring done
-- Generating done
-- Build files have been written to: ./opencv-3.3.0/build
If you can't see Generating done then some issues have been occurred. Read error messages and the error log file to investigate.
I did without examples, but you can try. Qt I deleted.
make
Better without -j4.
sudo make install
sudo ldconfig
Test the installation
linaro#tinkerboard:~$ python3
Python 3.5.3 (default, Jan 19 2017, 14:11:04)
[GCC 6.3.0 20170118] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import cv2
>>> cv2.__version__
'3.3.0'
installing ffmpeg ( the previous answers skiped this )
sudo apt update && sudo apt install ffmpeg libav-tools x264 x265
I also recommend installing the additional packages and enabling neon and vfpv3 when compiling the opncv files. This should give significant improvement in performance:
https://www.pyimagesearch.com/2017/10/09/optimizing-opencv-on-the-raspberry-pi/
I came to this question late. I am adding this answer for the future reference of the people. Here is the official documentation of Tinkerboard.
https://tinkerboarding.co.uk/wiki/index.php/CSI-camera
I just changed the version to the latest version at this time (3.4.1):
#!/bin/bash
#Install
sudo apt-get update
sudo apt-get upgrade
#Install a few developer tools
sudo apt-get install -y build-essential git cmake pkg-config
#Install image I/O packages which allow us to load image file formats such as JPEG, PNG, TIFF, etc.
sudo apt-get install -y libjpeg-dev libtiff5-dev libpng-dev
#Install video I/O packages
sudo apt-get install -y libavcodec-dev libavformat-dev libswscale-dev libv4l-dev libxvidcore-dev libx264-dev libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev
#Install the GTK development library
sudo apt-get install -y libgtk2.0-dev
#Various operations inside of OpenCV (such as matrix operations) can be optimized using added dependencies
sudo apt-get install -y libatlas-base-dev gfortran
#Install the Python 2.7 and Python 3 header files
sudo apt-get install -y python2.7-dev python3-dev python-opencv
wget https://github.com/opencv/opencv/archive/3.4.1.zip
unzip 3.4.1.zip
cd opencv-3.4.1
mkdir build
cd build
cmake -D CMAKE_BUILD_TYPE=Release -D WITH_LIBV4L=ON -D CMAKE_INSTALL_PREFIX=/usr/local ..
sudo make install
It took around 90 minutes to compile.