Jenkins (TRM) sets in the setup config (the firmware section) a comma instead of the relative location of the directory, even though "using configuration" in the console shows the correct location. the comma appears in the JK build parameters, seems JK overwrites the key from the config.json
To avoid this comma charecter, go to Advanced: Advanced
And enable : Omit value field
Related
The Jenkins email-ext plugin supports a ${LOG_REGEX} 'token'. It's documented like this:
${LOG_REGEX}
Uses a regular expression to find a single log entry and generates a new output using the capture groups from it. This is partially based on the description-setter plugin (https://github.com/jenkinsci/description-setter-plugin).
(That's part of the documentation that's shown when I click on the "?" (question mark) associated with the Content Token Reference in the Editable Email Notification section of the Jenkins project configuration page.)
When I use this token, how do I specify the regular expression and the output? I guess it probably takes a pair of parameters, but, if so, what are their names?
I determined through trial and error that the parameter names are regex and replacement.
For example, if your job console contains
Started by upstream project "my-project" build number 12345
then the token
${LOG_REGEX, regex="^Started by upstream project \"(.+)\" build number ([0-9]+)", replacement="\\1 #\\2"}
will be replaced by
my-project #12345
Keep in mind that, in parameter values, \ and " must be escaped with a \.
I'd like to overwrite admonition labels.
Admonitions are directives such as note, warning, and so on.
For Japanese, the labels are defined in
https://github.com/sphinx-doc/sphinx/blob/master/sphinx/locale/ja/LC_MESSAGES/sphinx.po.
Is there a simple way to overwrite them without changing the master repository?
Here is what works for me (tested with Sphinx 3.3.1):
Copy the Japanese sphinx.po from <sphinx_install_dir>/sphinx/locale/ja/LC_MESSAGES/
to <your_sphinx_proj>/locales/ja/LC_MESSAGES/.
Note the directory name locales (the default value of the locale_dirs configuration option).
Edit msgstr for the relevant entries (admonitions in this case) in the copy of sphinx.po.
It is not necessary to keep the entire copy. You can remove the unchanged entries if you want.
Run sphinx-build with language=ja (set it in conf.py or on the command line). A local project-specific sphinx.mo file is generated and used in the build.
This means that there will be two *.mo files for the same domain ("sphinx"). The local sphinx.mo is consulted first, and the original sphinx.mo that comes with Sphinx is used as the fallback.
I'm new to Jenkins so this is probably an easy one. I have the Extended Choice Parameter plugin installed. I'm using the Multi Select parameter type to pick from a list of servers (SERVER1,SERVER2,SERVER3) I've set Source for Value, Default Value, and Value Description.
I save it, and it looks great. I can pick any or all servers for the build. Now for the big question.. how do I use these values in the build? Basically I have a step in the build that can take in a comma separated list that is called by a shell command:
d:\python\deploy.py?serverlist=$blah
What do I put in for $blah to use that list of servers?
Just to be clear, if I'm on command line I would do the following:
d:\python\deploy.py?serverlist=SERVER1,SERVER2,SERVER3
I'm sure it's something simple but I just cannot find it in the docs or an example.
We could get the servers list like this
d:\python\deploy.py?serverlist=$SERVERLIST
or this on Windows
d:\python\deploy.py?serverlist=%SERVERLIST%
To see the list of environment variables which we could you, try this URL (change localhost by your Jenkins URL, TEST by the job name, 10 by the build number)
https://localhost:8080/job/TEST/10/injectedEnvVars/
UPDATE to #sniperd's edition:
This URL will shows us the parameters list in the Job:
http://localhost:8080/job/TEST/59/parameters/
Currently I am using Choice parameter to input the hostname in a drop-down like below.
server1
server2
server3
I am include the selected value in property.
Server=%Hostname%
Also I am invoking the same in post build actions-->Email Notification-->Subject-->Login success for $Hostname.
But my requirement is instead of a drop-down I need a check box option for server1, server2 & server3 so that I can select multiple servers at one time and build the job.
Also I need to include the hostname in property and in email subject. But the Email subject should not contain the actual hostname (server), instead it has to be a different name.
Let's say,
server1 = DEV
server2 = QA
The property should take "server1" value and the email suject should take "DEV".
I am trying to use Extended Choice Parameter plugin, but I am stuck, so any help would be really appreciated!
Extended Choice Parameter plugin is the way to go for such requirement. You need to select Extended Choice Parameter from the drop-down list as shown below.
Once you select that option, you will see another drop-down with the name Parameter Type as shown in the snapshot below. Select Multi Select from that drop-down. Enter the server names in Value box. Comma (,) is the delimiter.
Now if you run the command echo "Server: $Hostname" on *nix systems after selecting one (or more than one) server, you will get all the selected server(s) in the command output.
Now to address your query of displaying names such as Dev/QA instead of actual server names, you will obviously have to do some amount of scripting. Since you are taking the server names in a string, you will first have to split the string using comma (,) as delimiter to fetch individual values (servers). And then you will have do check each server and assign values to it. A pseudo code such as:
if ( str eq server1 ) {
host = QA;
} elsif ( str eq server 2 ) {
host = Dev;
} and so on...
I wrote a similar script in Perl few back back. You can use your language of choice (bash, batch etc.)
To pass these variables in subject line of your mail etc., you will have to use EnvInject Plugin as suggested by Slav. You can write the value (QA/Dev) in some file while running your if...else code so that it could be later used by the EnvInject plugin. Just in case, if you want an alternative way, you can simply use the system's mail command depending on the flavor you have.
With the Extended Choice Parameter, you can change between dropdown/multiselect/checkbox/radio-button by selecting the value called "Parameter Type". If you don't see that, you probably have a very old version of that plugin.
As for the second part of your question: you are going to have to do that mapping in your scripts, inject it using EnvInject plugin, and then use the injected value in your email
I am building a Windows Service which will be deployed on four servers. My user wants to have the service read a configuration file from a common location, and load it OnStart.
I want the installation to prompt the user for the file path and file name to the configuration file when the service is installed, and then save that data in My.Settings.
I have figured out how to set the EDITA1 and EDITA2 variables in the Deployment project's UI, so that the user will be prompted for path and file name, but I don't know how to get those values out and into the settings of the service.
Help, please.
-Jennifer
Did you try passing it to the custom action using CustomActionData Property in the Custom Action property window. syntax is /param=[EDITA1]
Context.Parameters will contain a dictionary with 1 entry key being "param" (in my example above that's the key I gave it).
I'm having a problem with passing in parameters which contain spaces. the guidelines say:
For custom actions that are installation components (ProjectInstaller
classes), the CustomActionData property takes a format of /name=value.
Multiple values must be separated by a single space: /name1=value1
/name2=value2.
If the value has a space in it, it must be surrounded by
quotes: /name="a value".
Windows Installer properties can be passed using the bracketed syntax:
/name=[PROPERTYNAME].
For Windows Installer properties such as [TARGETDIR]
that return a directory, in addition to the brackets you must include quotes
and a trailing backslash: /name="[TARGETDIR]\".
When I try the "[EDITA1]\" for the file path I need.. I get the 'FileNotFound' error for "C..\Microsoft..." while my path didn't have Microsoft