Interrupting pulumi up command caused below error
error: could not get cloud url: failed to read Pulumi credentials file. Please re-run `pulumi login` to reset your credentials file: unexpected end of JSON input
When trying to run pulumi login it gives below error
error: could not determine current cloud: failed to read Pulumi credentials file. Please re-run `pulumi login` to reset your credentials file: unexpected end of JSON input
Any idea how to fix this
This is due to corrupted credentials file, Run which pulumi and the credentials.json file in the installation directroy and delete it. Run pulumi login
Related
Locally, I am able to successfully authorize and pull modules from my private Nexus registry (.npmrc file).
However on Jenkins I get
error An unexpected error occurred: "https://myprivaterepo.com/myprivatemodule.tgz: Request failed \"401 Unauthorized\"".
When I run npm whoami on Jenkins it returns a valid user. npm config ls prints valid configuration as well.
The problem started to occur when I changed myprivaterepo url (we've migrated it). Is there something I don't know (ie. I have to logout/login again or there's some cache in Jenkins)??
Thanks in advance!
I was trying to build the docker image for a project I'm working onto.
It's based on jhipster, after configuring the project it tells me to run the following maven command:
./mvnw -ntp -Pprod verify jib:dockerBuild
Unfortunately it doesn't seem to work, it returns me this errors:
[WARNING] The credential helper (docker-credential-pass) has nothing for server URL: registry.hub.docker.com
...
[WARNING] The credential helper (docker-credential-pass) has nothing for server URL: index.docker.io
[WARNING]
And finally fails with:
[ERROR] Failed to execute goal com.google.cloud.tools:jib-maven-plugin:2.4.0:dockerBuild (default-cli) on project booking: (null exception message): NullPointerException -> [Help 1]
Recently I worked on a google cloud project, and I edited the ~/.docker/config.json configuration file. I had to remove google's configuration entries to sort out another problem. Could that be the origin of the problem I'm facing now?
I've tried to do docker logout and docker login without success.
Some considerations
I don't know if editing manually the configuration caused the error, in fact I'm pretty sure to have deleted only google-related entries, but nothing referring to docker.* or similar.
To solve this issue, avoid to edit manually the docker configuration file. In fact I think that it should be avoided whenever possible, to avoid configuration problems of any sort.
Instead, just follow what the error message is trying to tell you: docker is not able to access those urls. Excluding network problems (which you can troubleshoot with ping registry-1.docker.io for example), it should be an authentication problem.
How to fix
I've found out that running those commands fixed it:
docker login registry.hub.docker.com
docker login registry-1.docker.io
I don't know if registry-1.docker.io is just a mirror of the other first server, which the plugin tries to access after the first unsuccessful connection. You can try to loging to registry.hub.docker.com and re-launch the command to see if it sufficient. In case it's not, login to the second one and then it will work.
I ran jib via Gradle:
./gradlew jibDockerBuild
and got a similar error
FAILURE: Build failed with an exception.
* What went wrong:
Execution failed for task ':jibDockerBuild'.
> com.google.cloud.tools.jib.plugins.common.BuildStepsExecutionException: Build to Docker daemon failed, perhaps you should make sure your credentials for 'registry-1.docker.io/library/openjdk' are set up correctly. See https://github.com/GoogleContainerTools/jib/blob/master/docs/faq.md#what-should-i-do-when-the-registry-responds-with-unauthorized for help
What ended up solving this error for me, bizarrely enough, was to log out of Docker Desktop.
I later also tried funder7's solution while logged in to Docker Desktop, and that also worked.
I am trying to follow these instructions to log correctly from java to logback to cloudrun...
https://cloud.google.com/logging/docs/setup/java
If I used jdk8, I get alpn missing jetty issues so I moved to a Docker image openjdk:10-jre-slim
and my DockerFile is simple
FROM openjdk:10-jre-slim
RUN mkdir -p ./webpieces
COPY . ./webpieces/
COPY config/logback.cloudrun.xml ./webpieces/config/logback.xml
WORKDIR "/webpieces"
ENTRYPOINT ./bin/customerportal -http.port=:$PORT -hibernate.persistenceunit=cloud-production
AND the only difference is I switched the image from openjdk:8-jdk-alpine which worked fine!!!
When I deploy to google cloud I get this error...
Deploying container to Cloud Run service [staging-customerportal] in project [orderly-gcp] region [us-west1]
⠏ Deploying... Cloud Run error: Invalid argument error. Invalid ENTRYPOINT. [name: "gcr.io/orderly-gcp/customerportal2#sha256:6c1c2e7531684d8f50a3120f1de60cade841ab1d9069b
704ee3fd8499c5b7779"
error: "Invalid command \"/bin/sh\": file not found"
].
X Deploying... Cloud Run error: Invalid argument error. Invalid ENTRYPOINT. [name: "gcr.io/orderly-gcp/customerportal2#sha256:6c1c2e7531684d8f50a3120f1de60cade841ab1d9069b
704ee3fd8499c5b7779"
error: "Invalid command \"/bin/sh\": file not found"
].
. Routing traffic...
Deployment failed
ERROR: (gcloud.run.deploy) Cloud Run error: Invalid argument error. Invalid ENTRYPOINT. [name: "gcr.io/orderly-gcp/customerportal2#sha256:6c1c2e7531684d8f50a3120f1de60cade841ab1d9069b704ee3fd8499c5b7779"
error: "Invalid command \"/bin/sh\": file not found"
].
However, when I run locally to test, I get this error on project ID being required so it seems it is working. SIDE QUESTION: How to simulate this project ID so I can still run locally?
03:10:08,650 |-INFO in ch.qos.logback.core.joran.action.AppenderAction - Naming appender as [CLOUD]
03:10:09,868 |-ERROR in ch.qos.logback.core.joran.spi.Interpreter#14:13 - RuntimeException in Action for tag [appender] java.lang.IllegalArgumentException: A project ID is required for this service but could not be determined from the builder or the environment. Please set a project ID using the builder.
at java.lang.IllegalArgumentException: A project ID is required for this service but could not be determined from the builder or the environment. Please set a project ID using the builder.
at at com.google.common.base.Preconditions.checkArgument(Preconditions.java:142)
at at com.google.cloud.ServiceOptions.<init>(ServiceOptions.java:285)
at at com.google.cloud.logging.LoggingOptions.<init>(LoggingOptions.java:98)
at at com.google.cloud.logging.LoggingOptions$Builder.build(LoggingOptions.java:92)
at at com.google.cloud.logging.LoggingOptions.getDefaultInstance(LoggingOptions.java:52)
at at com.google.cloud.logging.logback.LoggingAppender.getLoggingOptions(LoggingAppender.java:246)
at at com.google.cloud.logging.logback.LoggingAppender.getProjectId(LoggingAppender.java:209)
at at com.google.cloud.logging.logback.LoggingAppender.start(LoggingAppender.java:194)
at at ch.qos.logback.core.joran.action.AppenderAction.end(AppenderAction.java:90)
at at ch.qos.logback.core.joran.spi.Interpreter.callEndAction(Interpreter.java:309)
at at ch.qos.logback.core.joran.spi.Interpreter.endElement(Interpreter.java:193)
at at ch.qos.logback.core.joran.spi.Interpreter.endElement(Interpreter.java:179)
at at ch.qos.logback.core.joran.spi.EventPlayer.play(EventPlayer.java:62)
at at ch.qos.logback.core.joran.GenericConfigurator.doConfigure(GenericConfigurator.java:165)
at at ch.qos.logback.core.joran.GenericConfigurator.doConfigure(GenericConfigurator.java:152)
at at ch.qos.logback.core.joran.GenericConfigurator.doConfigure(GenericConfigurator.java:110)
The Java 10 version is EOL, and the official images has been removed. More detail here
Prefer a Java 11 version.
Anyway, when you use version, some are optimized and does not install bash by default (for reducing their size) and you have to install it by yourselves.
For a local run, I don't recommend to use a JSON key file (in general, don't use JSON key file, except for automated system out of GCP) due to security constraint, key rotation, secure storage,...
For setting the project, simply perform this command gcloud config set project MY_PROJECT. You don't need credential for this.
Since your current question is how to simulate the project ID for local testing:
You should download service account key file from https://console.cloud.google.com/iam-admin/serviceaccounts/project?project=MY_PROJECT, make it accessible inside docker container and activate it via
gcloud auth activate-service-account --key-file my_service_account.json
gcloud config set project MY_PROJECT
This problem may be due to the fact that alpine doesn't have bash:
"/bin/sh" therefore a solution could be to remove the dependency on bash itself by not using bash or by using exec instead of bash.
in my case I solved the problem by using a more complete base image, instead of alpine for instance.
HTH
I just installed 19.03.2 on my windows 10 laptop. When I attempt any docker command such as docker login or docker version, I get the warning as below.
WARNING: Error loading config file: C:\Users\user-id.docker\config.json: json: cannot unmarshal string into Go value of type configfile.ConfigFile
My config.json looks as below
"quay.io": {"<hidden for security reasons>"}
Could not find any reference to error for docker login in google search. There are reference for type string, but not for configfile.
Any help is appreciated. Thanks in advance.
Clear the file, delete everything in: C:\Users\user-id.docker\config.json
From the command line run:
docker login -u your_docker_username "https://index.docker.io/v1/"
Type your password
Output:
Login Succeeded
It will generate "auths" credentials in C:\Users\user-id.docker\config.json file
You can use dokcer login again with no problems after that
I using endly for end to end testing and my application is running on docker container, and I am facing this error. I already have my secret keys/folder in place.
[run[build]run|build[Init]docker.run ssh: no key found at exec.extract error]
[run[build]run|build[Init]docker.run build_Init: ssh: no key found at docker.run/exec.extract at workflow.run error]
[run[build]run|build[Init]docker.run build: build_Init: ssh: no key found at docker.run/exec.extract at workflow error]
build: build_Init: ssh: no key found at docker.run/exec.extract at workflow.run at workflow.run
[run[build]run|build[Init]docker.run run_init: build: build_Init: ssh: no key found at docker.run/exec.extract a error]
I followed the steps mentioned in github.com/viant/endly/tree/master/doc/secrets link. The contents of my localhost.json is {"Username":"xxx","EncryptedPassword":"xxx","PrivateKeyPath":"xxx/.ssh/id_rsa.pub"}
You would get this error message in endly if there is an error during ssh if endly is unable to use the secrets/credentials provided to ssh.
Could you provide additional details on the credentials file.
1. How you went about creating the file.
2. Contents of the file without your password.
I am assuming your are configuring to ssh to local when building and deploying you app so the secret file would be localhost.json.
Please refer to endly secret for creating credentials.