Guys while i was running anchor test on macbook m1, i am getting this error. Does anybody have a fix for this.
BPF SDK: /Users/dhruvjain/solana/bin/sdk/bpf
Running: rustup toolchain list -v
Running: cargo +bpf build --target bpfel-unknown-unknown --release
error: failed to download `solana-frozen-abi v1.9.9`
Caused by:
unable to get packages from source
Caused by:
failed to parse manifest at `/Users/dhruvjain/.cargo/registry/src/github.com-1ecc6299db9ec823/solana-frozen-abi-1.9.9/Cargo.toml`
Caused by:
feature `edition2021` is required
consider adding `cargo-features = ["edition2021"]` to the manifest
I found that i may have old rust or cargo version. But they seem to be up to date.
rustc 1.59.0 (9d1b2106e 2022-02-23)
Cargo Version
cargo 1.59.0 (49d8809dc 2022-02-10)
I ran cargo clean but i still got the same error. Can somebody help me to solve this issue.
what solana version ?
solana -V
Ensure you are runnning 1.9.9
sh -c "$(curl -sSfL https://release.solana.com/v1.9.9/install)"
Related
After Monterey 12.3 beta 2 installed, the Espressif tool chain is broken. If you compile with platformIO you'll get the following error:
^
Linking .pio/build/esp32dev/firmware.elf
/Users/stephanedeluca/.platformio/packages/toolchain-xtensa32/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: /Users/stephanedeluca/.platformio/packages/toolchain-xtensa32/bin/../libexec/gcc/xtensa-esp32-elf/5.2.0/liblto_plugin.so: error loading plugin: dlopen(/Users/stephanedeluca/.platformio/packages/toolchain-xtensa32/bin/../libexec/gcc/xtensa-esp32-elf/5.2.0/liblto_plugin.so, 0x0002): Library not loaded: /opt/osxcross/target/bin/../x86_64-apple-darwin12/lib/libstdc++.6.dylib
Referenced from: /Users/stephanedeluca/.platformio/packages/toolchain-xtensa32/libexec/gcc/xtensa-esp32-elf/5.2.0/liblto_plugin.0.so
Reason: tried: '/opt/osxcross/target/bin/../x86_64-apple-darwin12/lib/libstdc++.6.dylib' (no such file)
collect2: error: ld returned 1 exit status
*** [.pio/build/esp32dev/firmware.elf] Error 1
Looking at my Mac, there is no /opt/osxcross.
I have searched on another Mac with the beta 1 where the tool chain was still working the presence of the folder, and guess what?! there's none!
Any idea what as actually broken by the beta?
Finally, here is a work around: we are going to provide the missing /opt/osxcross folder and contents.
If you do not have gcc installed (this should be unlikely though, install gcc to get the folder content, as follows:
$ brew install gcc
Create the missing /opt/osxcross folder as follows:
$ sudo mkdir -p /opt/osxcross/target/bin/../x86_64-apple-darwin12/lib/
Note that you'll be prompted for your password.
And, finally, copy the folder contents from the gcc build as follows:
$ sudo cp /usr/local/Cellar/gcc/11.2.0_3/lib/gcc/11/libstdc++.6.dylib /opt/osxcross/target/x86_64-apple-darwin12/lib/libstdc++.6.dylib
This completes the fix.
You must restart vscode, Arduino IDE or whatever tool you use. And then build your project, which should compile successfully.
And voila.
When installing the alacritty terminal on debian with cargo I get this error:
And when running cargo install crossfont I get this error:
Please help. Oh yeah btw I am running debian just so you know.
Alright boys i got the solution:
You need to install rustup and update to the newest version
then just run it again and it works magically
I tried to build HandTrackingExample and get this error
ERROR:
/Users/air/Documents/mediapipe/mediapipe/examples/ios/handtrackinggpu/BUILD:34:16:
ProcessEntitlementsFiles
mediapipe/examples/ios/handtrackinggpu/HandTrackingGpuApp_entitlements.entitlements
failed (Exit 1): plisttool failed: error executing command
bazel-out/host/bin/external/build_bazel_rules_apple/tools/plisttool/plisttool
... (remaining 1 argument(s) skipped)
Note: The failure of target
#build_bazel_rules_apple//tools/plisttool:plisttool (with exit code 1)
may have been caused by the fact that it is running under Python 2
instead of Python 3. Examine the error to determine if that appears to
be the problem. Since this target is built in the host configuration,
the only way to change its version is to set --host_force_python=PY3,
which affects the entire build.
If this error started occurring in Bazel 0.27 and later, it may be
because the Python toolchain now enforces that targets analyzed as PY2
and PY3 run under a Python 2 and Python 3 interpreter, respectively.
See https://github.com/bazelbuild/bazel/issues/7899 for more
information.
I tried build with --host_force_python=PY3 and PY2 but error the same
The link that is given in the error did not find a solution to your problem. How do I build a project correctly?
Try it
$ brew install python
$ sudo ln -s -f /usr/local/bin/python3.7 /usr/local/bin/python
$ python --version
Python 3.7.4
$ pip3 install --user six
I am trying to install opencv using conda on a windows machine. I am running the following command:
conda install --channel https://conda.anaconda.org/menpo opencv
and getting the following error:
Solving environment: done
## Package Plan ##
environment location: C:\ProgramData\Anaconda2
added / updated specs:
- opencv
The following NEW packages will be INSTALLED:
opencv: 2.4.11-py27_1 menpo
Proceed ([y]/n)? y
Preparing transaction: done
Verifying transaction: done
Executing transaction: - WARNING conda.gateways.disk:exp_backoff_fn(49):
Uncaught backoff with errno EEXIST 17
failed
ERROR conda.core.link:_execute(502): An error occurred while installing
package 'None'.
IOError(13, 'Permission denied')
Attempting to roll back.
Rolling back transaction: done
IOError(13, 'Permission denied')
WindowsError(183, 'Cannot create a file when that file already exists')
Other people seem to have similar problems (https://github.com/conda/conda/issues/4393). One of the solutions I found was to downgrade conda. I am currently using conda 4.5.4 and when I try to downgrade using conda install conda=4.2 I get the following error:
The following packages will be DOWNGRADED:
conda: 4.5.4-py27_0 --> 4.2.16-py27_0
conda-build: 3.10.5-py27_0 --> 3.9.2-py27_0
Proceed ([y]/n)? y
Preparing transaction: done
Verifying transaction: done
Executing transaction: failed
ERROR conda.core.link:_execute(502): An error occurred while uninstalling
package 'defaults::conda-build-3.10.5-py27_0'.
WindowsError(5, 'Access is denied')
Attempting to roll back.
Rolling back transaction: done
WindowsError(5, 'Access is denied')
Regarding this issue I found the following similar posts:
conda update conda permission error
Anaconda : Update conda failed because permission error
But the solutions given do not fix my problem.
I also had a problem with installation and usage of the OpenCV library. If you have such а problem, you can try:
uninstall opencv with: conda remove --yes opencv (in case you have an installation but it does not work properly)
install OpenCV through pip: pip install opencv-python
I think this is a problem with opencv that comes from Anaconda channels. I came across this problem four months ago. Тhe problem may be resolved right now.
My guess is that you did not run this command with administrator privileges！
I am using below configuration and trying to make Jenkins build but I am getting errors.
Note, I am able to make build successfully with command line.
My PC environments:
OS: ubuntu 14.04
Gradle version: 2.14.1.
Jenkins version: 2.25
Java version: java-8-openjdk-amd64
JENKINS BUILD ERRORS:
[workspace] $ /bin/sh -xe /tmp/hudson2322559356105735311.sh
+ cd /home/ekambaramv/Jenkins/workspace/CARMODE_STAR_O-OS/MAIN/
+ export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64/
+ GRADLE_USER_HOME=/home/ekambaramv/Jenkins/gradle-2.14.1/
+ /home/ekambaramv/Jenkins/gradle-2.14.1/bin/gradle clean build
**FAILURE:** Build failed with an exception.
* What went wrong:
Failed to load native library 'libnative-platform.so' for Linux amd64.
* Try:
Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output.
Build step 'Execute shell' marked build as failure
Finished: FAILUR
E
I've had similar problems with the JNI libary when using Gradle. It's possible you might be using a version of the JNI library that is incompatible with Gradle.
Try going to the site: https://debian.pkgs.org/9/debian-main-amd64/libnative-platform-jni_0.11-5_amd64.deb.html and downloading the libnative-platform-jni_0.11-5_amd64.deb package onto your machine.
You can either open Nautilus and right click the .deb package and select 'Open with Software Install', or you can navigate the command line to the download directory and run the following:
sudo apt-get install ./libnative-platform-jni_0.11-5_amd64.deb
Next, check to see if Gradle still gives you the same "Failed to load native library..." error message as before by running:
gradle --version
If the problem persists, and you still get the error message, you might want to consider upgrading to a later version of Gradle. I was able to get this working on Gradle 3.2.1, but I know this method isn't always possible.
If you need to back out the changes, just run another sudo apt-get update, and the JNI libraries will be overwritten with the latest version once more.
One More Thing
I mentioned the libraries get overwritten the next time you update your system (apt-get, Software Updater). To prevent this, run the following command:
sudo apt-mark hold libnative-platform-jni
This will force the update software to overlook any later versions of the library. To turn this off, run the opposite command:
sudo apt-mark unhold libnative-platform-jni