It's simple to count all cells that match a certain value, but how do i could all cells that dont match one of the values within a range?
For example, how do I could cells not equal to red blue or green?
Normally you can do =COUNTIF(A2:A10,B2) to count ones that match a cell, but as you see from the picture it doesn't work with a range.
there are various ways like:
=COUNTA(A2:A)-SUM(C2:C4)
or:
=COUNTA(IFNA(FILTER(A2:A, NOT(REGEXMATCH(A2:A, TEXTJOIN("|", 1, B2:B))))))
Related
I have been working on sheet where i always apply SUM manual by selecting the each cell separately.
There are multiple sheets where i SUM manually with similar headers that are available in Col"A".
I just want to make SUM formula dynamic.
when it will become dynamic i will drag it from left to right and formula will give SUM result.
I have tried with IF but could not make it and i am sure its not just IF that could make it.
use:
=SUM(FILTER(B5:B, REGEXMATCH($A5:$A, TEXTJOIN("|", 1, $L2:$L))))
I'm trying to count the number of empty cells that exist in a column between each non-empty cell but haven't been able to work out how.
Using this, I'm also trying to find the largest "empty distances" and locate the cell in the center of these distances.
The sheet I'm working with lists a set of marker colors and denotes the ones that are owned out of the full set of colors. I'm trying to find the largest ranges of missing colors and then find the colors in the middle of those ranges in order to find a handful of markers that would best help to fill out the spectrum.
Columns 1-6 are information- Column 7 marks whether the color is owned:
I may have an answer that helps you.
I could only get it to work using a helper column, but someone may know how to eliminate that requirement.
The helper column creates an array, basically listing the row numbers of the rows that have an "x" in your column B.
The main formula then measures the gap between each of these listed row numbers. It also checks the gap before the first "x", and after the last "x". Note that I have the data starting on row 2, which complicates the formula, but makes the sample sheet clearer - this can easily be changed to row 1 if you prefer.
={F2-1;
query(ArrayFormula(if(isnumber(F3:F),F3:F-F2:F-1,"")),
"select Col1 where Col1 > 0",0);
counta(A2:A)-indirect("F"&COUNTA(F$2:F))}
See a sample sheet here:
https://docs.google.com/spreadsheets/d/19QUFGRqTT6BqOsBrEBpTIxQCeNdRa5mzXhxQpCZ8sV4/edit?usp=sharing
Then I used a second formula to calculate the max gap between "x"s, (or before the first or after the last x).
Note that calculating the midpoint of the gaps, and doing a lookup of the corresponding mid-point colour, is something that can be added to this answer, if you share a sample copy of your sheet and share it for editing.
Let me know if this helps. I'll add more explanation to describe what the formula is doing tomorrow.
And I'll provide a second tab with the formulas adjusted to work with data beginning on row 1.
You can also get the lengths of the gaps using Frequency:
=ArrayFormula(frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),if((B1:B20="X")*(A1:A20<>""),row(B1:B20))))
but finding the centres of the gaps and allowing for equal-sized gaps is more difficult.
This should find the position of the "X" at the end of the longest gap:
=ArrayFormula(
sum(frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20)))*(sequence(countif(B1:B20,"X")+1,1)<=
match(max(frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20)))),frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20))),0)))+
countif(sequence(countif(B1:B20,"X")+1,1),"<="&
match(max(frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20)))),frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20))),0))
)
and then it should just be a case of working backwards from there to the centre of the longest gap. However the formula needs further refinement to deal with the cases
(1) Where the longest gap is after the last "X"
(2) Where there is a tie for the longest gap
(3) Where there is a need to list the longest, second longest, third longest gap etc.
I want to change format of cell A1 colored green , depends on the value in cells (A2:A5) if all cells value is "Done" , I want to color A1 Green.
Approach:
Now you are checking only the cell A2. You should check all the column range.
Your idea is to make your header green when all the cells contain the word "Done". You can translate this idea to: I have exactly 0 cells that don't contain the word "Done". This way you won't have to keep track of how many cells are in your column.
You can count how many values respect a criterion using the function COUNTIF.
Formula:
=COUNTIF(A2:A5, "<>Done") = 0
I'm needing a formula that gives me the value of the "I" cell if other cells in the row match specific values.
For instance, based on the image I've linked below, if I looked for the results of rows where B=5, C=2, D=2, E=1, and H=F, it would give me the I cell values for rows 12 and 15 (3.03 and 3.63).
Maybe:
=QUERY(A:I,"SELECT I WHERE B=5 and C=2 and D=2 and E=1 and H='F'")
Untested as I can't be bothered to key in what you did not bother to provide as text.
I have a row of values (say 1-10)
At the beginning of the rows I have 2 numbers generated from dates from other cells that represent week numbers. (eg, 3 and 9)
I want my row to highlight all the numbers from 1-10 that are between the values from the week number cells. (eg the cells with numbers 3,4,5,6,7,8 and 9 will automatically turn a colour (say green))
I've tried the conditional format, using the "between" values.
It doesn't work.
If I just type the numbers into the format box, it will work, but the problem is I need it to refer to the value in the cell NOT a number I type in, because there is a likelihood that the dates could change, which will affect the value shown in week number cell, so I need it to work automatically and not require me to go through every single row changing values for the formatting.
Is this even possible on sheets?
Thanks in advance, I am hoping I've just overlooked something simple.
Use a custom function for conditional formatting. For instance, if the columns you describe are in Row 2, this function will evaluate "TRUE" for numbers that are >= A2 and <= B2:
=AND(C2>=$A2,C2<=$B2)
Select the range of cells you wish to create a conditional format for; C2..L2, say. Open the conditional formatting dialog, and choose "Custom formula". Enter the formula above; note that itr refers to the top-left corner of the range you wish to apply the formula to - Sheets will automatically adjust it for the rest of the range, which is why it's important to use absolute references for the first two columns.