Hi I'm curious if this is even possible and just thought I'd throw it out.
I have this function in google sheets:
=ArrayFormula(TRIM(TRANSPOSE(SPLIT(QUERY(REPT(UNIQUE('Data Validation'!B3)&",",'Data Validation'!C3),,999^99),","))))
It allows me to specify the thing I want repeated as well as the number of times I want it repeated. Both of those are found in my data validation sheet which contains the following:
I am curious if there is a way to build the array formula so it essentially says:
repeat each element in column B the corresponding number of times in column C
Or in other words repeat EVP Sales 380 times then in the same output column repeat VP Inside Payments 36 times etc.
I haven't found anything remotely related to this online.
Thanks!
The formula you are using is already built for that scenario, just supply the needed range to calculate it properly
Formula:
=ArrayFormula(TRIM(TRANSPOSE(SPLIT(QUERY(REPT(UNIQUE('Data Validation'!B2:B4)&",",'Data Validation'!C2:C4),,999^99),","))))
Output:
Related
I've recently started using Google Sheets for my new job and I need help with a little problem.
I created a function to compare a whole column of dates from a sheet with dates from another column on another sheet to filter the given count.
The code is as follows:
COUNTIFS('raw data'!$D$2:$D$952;">="&('2nd table'!$C$3:$C$52);'raw data'!$D$2:$D$952;">=01.08.2021";'raw data'!$D$2:$D$952;"<=31.08.2021")
raw data contains dates in column D. I've used 952 because that is the maximum range I can get. I've yet to solve how to implement this via named ranges.
2nd table contains the dates our employees started working at the company. I wanted to filter out the data that exists before their time at our company within raw data column D.
The function does return the correct value sometimes and sometimes it just returns 0.
If I boil down the function to just contain this:
=COUNTIFS('raw data'!$D$2:$D$952;">="&('2nd table'!$C$3:$C$52))
I get different values each time. I suspect that I cannot use the function in this way because the 2nd table got a different amount of rows to compare from.
How can I work around this issue if that's the problem and why does the function even work sometimes?
The Issue
In simple terms, I am trying to set a formula for an alternating pattern. The issue I keep running into is the fact that there are two alternating values, and Google Sheets doesn't like to repeat only one of those values without the other.
I have created an example sheet to demonstrate my issue. In Column A, a date is input. Column B and Column C then autofill with the day of the week and AM or PM respectively. Every other value in Column C alternates between AM and PM. I am trying to set it up so that the row is blank until a value in input in Column A. The issue comes when there is an odd number of Dates in Column A. Note that the alternating AM/PM pattern will never change.
What I've Tried
As seen in the image above, there are three main methods that I have tried. The data in C2:C8 is the desired result.
Method 1:
E2: =transpose(split({rept(join(";",{"AM";" "})&";",(roundup(counta(A2:A9)/2)))},";"))
F3: =transpose(split({rept(join(";",{"PM";" "})&";",(counta(A2:A9)/2))},";"))
These formulas work separately, and best represent what I am trying to accomplish, but I have not found a way to combine them to work together in one column.
Method 2:
H2: =transpose(split({rept(join(";",{"AM";"PM"})&";",(roundup(counta(A2:A9)/2)))},";"))
This is essentially the same as Method 1, but put into one formula. The issue here is that Google Sheets doesn't like to repeat half a number of times. So if the number of times to repeat (counta(A2:A9)/2) contains a half (i.e. 3.5), it will still round down to the nearest whole number.
Method 3:
J2: =ArrayFormula(TEXT(SEQUENCE(3),"")&{"AM";"PM"})
This one appeared most promising to me because when incrementing by one, it added one row, but I quickly ran into the issue where if I went over a sequence number of 2, it threw the error Array arguments to CONCAT are of different size.
References
I have used various search terms and websites to try to solve this, and have yet to find something that works. I may be missing something very simple, though, and hopefully this is a quick solution.
Example Sheet:
https://docs.google.com/spreadsheets/d/1I3EtptFLfDHpAQ8AR6Lwa01dSpJ3Cy8MTX1_OjHExSc/edit?usp=sharing
All my formulas are derived from the websites below:
REPT Function in Google Sheets
How to Repeat Multiple Columns N Times in Google Sheets
Delete everything in Col C (including the header) and place this formula in C1:
=ArrayFormula({"AM/PM"; IF(A2:A="",,IF(COUNTIFS(A2:A,A2:A,ROW(A2:A),"<="&ROW(A2:A))=1,"AM","PM"))})
The COUNTIFS finds the number of matches for the date "up to this row" for every row. Since that count will (or should) only ever be a 1 or a 2, the IF makes easy work of assigning "AM" or "PM" accordingly.
If I understand correctly it is enough to use ISEVEN function to alternate by rows:
=ArrayFormula(IF(A2:A,CHOOSE(ISEVEN(ROW(A2:A))+1,"PM","AM"),))
I am trying to find a formula that will give me the count of unique dates a persons' name appears in one of two different columns and/or both columns.
I have a set of data where a person's name may show up in a "driver" column or a "helper" column, multiple times over the course of one day. Throughout the day some drivers might also be helpers and some days a driver may come in for duty but only as a helper. Basically all drivers can be helpers, but not all helpers can be drivers.
I've attached a link to a sample sheet for more clarity.
https://docs.google.com/spreadsheets/d/1GqNa1hrViX4B6mkL3wWcqEsy87gmdw77DhkhIaswLyI/edit?usp=sharing
I've created a REPORTS tab with a SORT(UNIQUE(FLATTEN)) Formula to give me a list of the names that appear in the DATA Tab.
I'm looking for a way to count the unique dates a name from the name (Column A of the REPORTS Tab) appears in either of the two columns (Column B and/or C of the DATA Tab) to determine the total number of days worked so I can calculate the total number of days off over the range queried.
I've tried several iterations of countif, countunique, and countuniqueifs but cannot seem to find a way to return the correct values.
Any advice on how to make this work would be appreciated.
I think if you put this formula in cell b7 you'll be set. You can drag it down.
=Counta(Unique(filter(DATA!A:A,(DATA!C:C=A7)+(DATA!B:B=A7))))
Here's a working version of your file.
For anyone interested, Google Sheets' Filter function differs slightly from Excel's Filter function because Sheets attempts to make it easier for users to apply multiple conditions by simply separating each parameter with a comma. Example: =filter(A:A,A:A<>"",B:B<>"bad result") will provide different results between the Sheets and Excel.
Excel Filter requires users to specify multiple conditions within parenthesis and denote each criterion be flagged with an OR condition with a + else an AND condition with a multiplication sign *. While this can appear daunting and bizarre to multiply arrays that have text in it, it allows for more flexibility.
To Google's credit, if one follows the required Excel Syntax (as I did in this answer) then the functions will behave the same.
delete what you got and use:
=QUERY(QUERY(UNIQUE({DATA!A:B; DATA!A:A, DATA!C:C}),
"select Col2,count(Col1),"&D2&"-count(Col2)
where Col2 is not null
group by Col2"),
"offset 1", 0)
I am working on a Google Sheets file in order to get Track and Field Data.
The times run by the athletes are:
1:58.66
2:00.03
2:00.31
2:01.85
2:03.07
2:03.18
2:03.57
... etc.
In total I have 141 values. I have tried looking for functions to help me with this, but it seems as though these values are not accepted as numbers.
I need the average of all 141 times.
There is no direct way to get this done in excel, but you can achieve it using the following function (assuming your data is stored in column A)
=ARRAYFORMULA(sum(60*left(A1:A)+right(A1:A,5)))/COUNTA(A:A)
So, I used arrayfunction to go through the whole list at column A and converted it into seconds, then divided it by its count (using COUNTA for non-numeric values) to get the average seconds for all athletes.
You can export date in mm:ss.00 format again using this function,
=TEXT(B1/(24*60*60),"mm:ss.00")
Please note that TEXT function receives value (in days), hence you will have to divide the first function result (assumed it is at B1) by 24*60*60.
enjoy...
I'm trying to do a couple of different things with a spreadsheet in Google and running into some problems with the formulas I am using. I'm hoping someone might be able to direct me to a better solution or be able to correct the current issue I'm having.
First off all, here is a view of the data on Sheet 1 that I am pulling from:
Example Spreadsheet
The first task I'm trying to accomplish is to create a sheet that lists all of these shift days with the date in one column and the subject ("P: Ben" or S: Nicole") in another column. This sheet would be used to import the data via a CSV into our calendar system each month. I tried doing an Index-Match where it used the date to pull the associated values however I found that I had to keep adjusting the formula offsets in order to capture new information. It doesn't seem like Index-Match works when multiple rows/columns are involved. Is there a better way to pull this information?
The second task I am trying to accomplish is to create a new tab which lists all the dates a specific person is assigned too (that way this tab will update in real time and everyone can just look at their own sheet to see what days they are on-call). However, I run into the same problem here because for each new row I have to change the formula to reflect the correct information otherwise it doesn't pull the correct cell when it finds a match.
I would appreciate any and all information/advice on how to accomplish these tasks with the formula combination I mentioned or suggestions on other formulas to use that I have not been able to find.
Thanks in advance!
Brandon. There are a few ways to attack your tasks, but looking at the structure of your data, I would use curly brackets {} to create arrays. Here is an excerpt of how Google explains arrays in Sheets:
You can also create your own arrays in a formula in your spreadsheet
by using brackets { }. The brackets allow you to group together
values, while you use the following punctuation to determine which
order the values are displayed in:
Commas: Separate columns to help you write a row of data in an array.
For example, ={1, 2} would place the number 1 in the first cell and
the number 2 in the cell to the right in a new column.
Semicolons: Separate rows to help you write a column of data in an array. For
example, ={1; 2} would place the number 1 in the first cell and the
number 2 in the cell below in a new row.
Note: For countries that use
commas as decimal separators (for example €1,00), commas would be
replaced by backslashes () when creating arrays.
You can join multiple ranges into one continuous range using this same
punctuation. For example, to combine values from A1-A10 with the
values from D1-D10, you can use the following formula to create a
range in a continuous column: ={A1:A10; D1:D10}
Knowing that, here's a sample sheet of your data.
First Task:
create a sheet that lists all of these shift days with the date in one
column and the subject ("P: Ben" or S: Nicole") in another column.
To organize dates and subjects into discrete arrays, we'll collect them using curly brackets...
Dates: {A3:G3,A7:G7,A11:G11,A15:G15}
Subjects: {A4:G4,A5:G5,A8:G8,A9:G9,A12:G12,A13:G13,A16:G16,A17:G17}
This actually produces two rows rather than columns, but we'll deal with that in a minute. You'll note that, because there are two subjects per every one date, we need to effectively double each date captured.
Dates: {A3:G3,A3:G3,A7:G7,A7:G7,A11:G11,A11:G11,A15:G15,A15:G15}
Subjects: {A4:G4,A5:G5,A8:G8,A9:G9,A12:G12,A13:G13,A16:G16,A17:G17}
Still with me? If so, all that's left is to (a) turn these two rows into two columns using the TRANSPOSE function, (b) combine our two columns using another pair of curly brackets and a semicolon and (c) add a SORT function to list the dates in chronological order...
=SORT(TRANSPOSE({{A3:G3,A3:G3,A7:G7,A7:G7,A11:G11,A11:G11,A15:G15,A15:G15};{A4:G4,A5:G5,A8:G8,A9:G9,A12:G12,A13:G13,A16:G16,A17:G17}}),1,TRUE)
Second Task:
create a new tab which lists all the dates a specific person is
assigned too (that way this tab will update in real time and everyone
can just look at their own sheet to see what days they are on-call).
Assuming the two-column array we just created lives in A2:B53 on a new sheet called "Shifts," then we can use the FILTER function and SEARCH based on each name. The formula at the top of Ben's sheet would look like this:
=FILTER(Shifts!A2:B53,SEARCH("Ben",Shifts!B2:B53))
Hopefully this helps, but please let me know if I've misinterpreted anything. Cheers.