I'm trying to validate the existence of a UIButton that is initially disabled continueButton.isEnabled = false.
When I check the tree in calabash-ios console I get the following result
[UIWindow]
[UIView]
[UIView]
[MyProject.GradientView]
[UIImageView] [id:logo-1] [label:Logo 1]
[UIImageView] [id:logo-2] [label:Logo 2]
[MyProject.UnderlinedTextField] [label:Email] [text:]
[UITextFieldLabel] [label:EMAIL] [text:EMAIL]
[UIAccessibilityTextFieldElement] [label:Email] [text:EMAIL]
[UIButton] [label:Let's go]
[UIButtonLabel] [label:LET'S GO] [text:LET'S GO]
true
However, when I try to use query("button") I get an empty array. If the button is enabled and use query again the result is:
[
[0] {
"id" => nil,
"description" => "<UIButton: 0x7fcdc8f1b6b0; frame = (23 571; 329 63); clipsToBounds = YES; opaque = NO; layer = <CALayer: 0x608000228b20>>",
"label" => "Let's go",
"frame" => {
"y" => 571,
"x" => 23,
"width" => 329,
"height" => 63
},
"accessibilityElement" => true,
"value" => nil,
"alpha" => 1,
"enabled" => true,
"visible" => 1,
"selected" => false,
"class" => "UIButton",
"rect" => {
"y" => 571,
"center_x" => 187.5,
"center_y" => 602.5,
"x" => 23,
"width" => 329,
"height" => 63
}
}
]
Why a disabled button is not listed when using query? Is there any way to validate if a button exists regardless of its enable state?
UPDATE
When using query ("all button") as suggested by jmoody I'm able to get the button listed.
[
[0] {
"id" => nil,
"description" => "<UIButton: 0x7fe05ad18000; frame = (23 571; 329 63); clipsToBounds = YES; opaque = NO; layer = <CALayer: 0x60000022d940>>",
"label" => "Lets go",
"frame" => {
"y" => 571,
"x" => 23,
"width" => 329,
"height" => 63
},
"accessibilityElement" => true,
"value" => nil,
"alpha" => 1,
"enabled" => false,
"visible" => 0,
"selected" => false,
"class" => "UIButton",
"rect" => {
"y" => 571,
"center_x" => 187.5,
"center_y" => 602.5,
"x" => 23,
"width" => 329,
"height" => 63
}
}
]
When the button is disabled, is it physically visible?
# All buttons regardless of visibility.
query("all button")
# Ask every button if is enabled.
query("all button", :isEnabled)
# Filter buttons by disabled
query("all button isEnabled:0")
Why a disabled button is not listed when using query?
Calabash uses a visibility heuristic to determine if a view is visible.
At first glance, it does not look like Calabash asks anything about whether a UIControl is enabled or disabled to determine if a view is visible.
I have the same issue, but I can suggest a workaround:
specify different accessibilityIdentifier for the button when it's hidden or visible, something like my_super_button_hidden, when it's hidden and my_super_button_visible otherwise
always use all keyword in your button query
examine visibility by checking accessibilityIdentifier
examine enabled state as you did before
checked on ruby 2.4.0, run_loop 2.3.1
Is it possible to disable the options in a select element?
I have a form with a select element that by default has a lot of options available. During form creation, depending on information retrieved from the database, i would like to disable certain options.
Some research came up with
$form->get('selectElement')->setAttribute("disabled", array(0, 1, 2));
...which should disable the first 3 options, but unfortunately does not.
You must use the setAttribute() method to set the attributes of your select element, not its options. For this, you should use setValueOptions():
$myOptions = $form->get('selectElement')->getValueOptions();
foreach ([0, 1, 2] as $value) {
$myOptions [$value]['disabled'] = true ;
}
$form->get('selectElement')->setValueOptions($myOptions);
$myOptionsmust be an array of options:
[
[
'label' => 'My first option',
'disabled' => false,
'value' => 1
],
[
'label' => '2nd option',
'disabled' => false,
'value' => 2
],
[
'label' => '3rd option disabled',
'disabled' => true,
'value' => 3
],
]
How do I hide select all on select2?
https://select2.github.io/options.html
http://demos.krajee.com/widget-details/select2
'showToggleAll' => false, // does not work
you might want to find out why it does not work sense the demo version works ok but if you need to hide it...
$(".s2-togall-button, .s2-togall-select").css("display", "none")
run after the select2 has loaded seem to work for me.
Correct use of that option is like next:
echo $form->field($model, 'attribute')->widget(
Select2::classname(),
[
'data' => $arrayValues,
'theme' => Select2::THEME_BOOTSTRAP,
'options' => [
'class' => 'form-control',
'prompt'=> 'Select up to 3 values',
'multiple' => true,
],
'pluginOptions' => [
'tags' => false,
'maximumSelectionLength' => 3,
'allowClear' => false,
//'tokenSeparators' => [',', ' '],
'closeOnSelect' => true,
],
'showToggleAll' => false,
]
);
I hope will be useful
I have read through all relevant posts on Prawn but found no mentioning (even in Prawn's own documentation) of headers and footers.
However, I did see a demo on Prawnto's own website about headers and footers. I copied the entire source of that demo just to see if it works but an error of undefined method "header" is complained about. Am I to understand that Prawn took out header and footer recently in the gem or is there something else I need to do first to use header and footer?
The demo page:
http://cracklabs.com/prawnto/code/prawn_demos/source/text/flowing_text_with_header_and_footer
the part of code of concern:
Prawn::Document.generate("flow_with_headers_and_footers.pdf") do
header margin_box.top_left do
text "Here's My Fancy Header", :size => 25, :align => :center
end
text "hello world!"
end
And by header, just in case, I mean the snippets of words that appear usually at a corner of every page of a document. Like your account number in your bills pages.
thanks!
The sample you are refering to, from the prawnto plugin, is using an older version of prawn.
Since i also needed header and footer i looked a bit more into this. It seems that that version of prawn had header and footer methods, which were implemented using lazy bounding box. (found by checking the code on github)
In the new prawn version you can do the same thing using repeaters.
Here is the full sample rewritten using the new version:
require "#{File.dirname(__FILE__)}/../example_helper.rb"
Prawn::Document.generate("test.pdf") do
repeat :all do
# header
bounding_box [bounds.left, bounds.top], :width => bounds.width do
font "Helvetica"
text "Here's My Fancy Header", :align => :center, :size => 25
stroke_horizontal_rule
end
# footer
bounding_box [bounds.left, bounds.bottom + 25], :width => bounds.width do
font "Helvetica"
stroke_horizontal_rule
move_down(5)
text "And here's a sexy footer", :size => 16
end
end
bounding_box([bounds.left, bounds.top - 50], :width => bounds.width, :height => bounds.height - 100) do
text "this is some flowing text " * 200
move_down(20)
font "#{Prawn::BASEDIR}/data/fonts/DejaVuSans.ttf"
table [["ὕαλον ϕαγεῖν", "baaar", "1" ],
["This is","a sample", "2" ],
["Table", "dont\ncha\nknow?", "3" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules\nwith an iron fist", "x" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ],
[ "It", "Rules", "4" ]],
:font_size => 24,
:horizontal_padding => 10,
:vertical_padding => 3,
:border_width => 2,
:position => :center,
:headers => ["Column A","Column B","#"]
end
end
you can check the documentation page of repeat for other options which allow you to exactly specify where you want the repeaters.
#GrantSayer thx for the example, but this will only let you show the current page number, not the total number of pages.
You can also use the number_pages function for the footer:
Prawn::Document.generate("page_with_numbering.pdf") do
text "Hai"
start_new_page
text "bai"
start_new_page
text "-- Hai again"
number_pages "<page> in a total of <total>", [bounds.right - 50, 0]
end
However, in my case I also need to format/style and right align the page numbers to match company style guides. I used go_to_page(k) to create my own header and footer functions, which add the header and footer to each page after all the pages are created. This gives me both styling options and the total number of pages:
Prawn::Document.generate("footer_example.pdf", :skip_page_creation => true) do
10.times do
start_new_page
text "Some filler text for the page"
end
# footer
page_count.times do |i|
go_to_page(i+1)
lazy_bounding_box([bounds.right-50, bounds.bottom + 25], :width => 50) {
text "#{i+1} / #{page_count}"
}.draw
end
end
It's little bit different with latest version of Prawn you must passe an hash
Prawn::Document.generate("page_with_numbering.pdf") do
text "Hai"
start_new_page
text "bai"
start_new_page
text "-- Hai again"
number_pages "<page> in a total of <total>", { :start_count_at => 0, :page_filter => :all, :at => [bounds.right - 50, 0], :align => :right, :size => 14 }
end
If you want a footer that do not write stuff over your text, you have to create the bounding_box below the margin of the document using bounds.bottom.
require 'prawn'
file_name = 'hello.pdf'
random_table = (0..50).map{|i|[*('a'..'z')]} # generate a 2D array for example (~2 pages)
Prawn::Document::generate(file_name) do |pdf|
pdf.table random_table
pdf.page_count.times do |i|
pdf.bounding_box([pdf.bounds.left, pdf.bounds.bottom], :width => pdf.bounds.width, :height => 30) {
# for each page, count the page number and write it
pdf.go_to_page i+1
pdf.move_down 5 # move below the document margin
pdf.text "#{i+1}/#{pdf.page_count}", :align => :center # write the page number and the total page count
}
end
end
It should look like that, you can see that the footer is outside the margin bottom :
Hope it help someone
START EDIT
This works in prawn >= 0.12
END EDIT
Here is my solution using repeat, canvas and cell. Essentially I'm drawing my bounding boxes at the absolute top and bottom of every page. I'm using cell to have better styling control over it. Hope this is going to be helpful to someone. ( I used slightly annoying colors to better illustrate how you can control styling of header and footer)
Prawn::Document.generate("headers_and_footers_with_background.pdf") do
repeat :all do
# header
canvas do
bounding_box([bounds.left, bounds.top], :width => bounds.width) do
cell :content => 'Header',
:background_color => 'EEEEEE',
:width => bounds.width,
:height => 50,
:align => :center,
:text_color => "001B76",
:borders => [:bottom],
:border_width => 2,
:border_color => '00FF00',
:padding => 12
end
end
# footer
canvas do
bounding_box [bounds.left, bounds.bottom + 50], :width => bounds.width do
cell :content => 'Footer',
:background_color => '333333',
:width => bounds.width,
:height => 50,
:align => :center,
:text_color => "FFFFFF",
:borders => [:top],
:border_width => 2,
:border_color => 'FF0000',
:padding => 12
end
end
end
# body
bounding_box([bounds.left, bounds.top - 25], :width => bounds.width, :height => bounds.height - 50) do
100.times do
text "Some filler text for the page"
end
end
end
here's the problem when using the bounding_box for creating the custom footer contents... it is still rendering within the bounds of a margin.
I was looking for something that will write the contents in the margin area together with number_pages.(because a footer usually is set in the bottom margin area)... and it seems that there were none.
so instead, I used text_box and place the coordinates outside my main bounding box like so:
repeat :all do
text_box "My custom footer", size: 7, align: :center, :at => [bounds.left, bounds.bottom], :height => 100, :width => bounds.width
end
take note that the repeat :all , will render this footer text to every page.
The only way I've found to get a repeating item on a page is to use the Prawn::Document::LazyBoundingBox method. Basically this allows you to define a bounding box that is only rendered once you call it. So the usual pseudo-code steps are
Define lazy bounding box element assign to somevar
On each new page call the element.
The example from the source shows how
file = "lazy_bounding_boxes.pdf"
Prawn::Document.generate(file, :skip_page_creation => true) do
point = [bounds.right-50, bounds.bottom + 25]
page_counter = lazy_bounding_box(point, :width => 50) do
text "Page: #{page_count}"
end
10.times do
start_new_page
text "Some filler text for the page"
page_counter.draw
end
end
This gives you a Page-count text output on each new page. What would be ideal is if this could be applied in the setup of a page template that is reused without the manual call to render the element. Combined with text flow this would give the traditional solution of headers and footers.