Scenario is, Job A's build have to trigger 100's of parallel paramaterized builds in Job B and wait for the return status - Success or Failed or Aborted
JOB A
|------> JOB B
- build 1
- build 2
- .....
- build 100
I'm aware of the following plugins can help in a way, but is there any out of box solution or script to wait for the return values of 100's of build status at tandem and then mark the status of the parent Job.
Multijob Plugin
Multi-Configuration Project
Paramterized Trigger
Plugin
Builds of Job B vary in time, from ~5 mins to ~15 mins.
Related
I have one pipeline build called, for example UAT. This build is scheduled every 3 minutes. And another build called DEV. DEV is scheduled every minute. The task is: to run UAT only if the last DEV execution was SUCCESS. If not - skip the execution. And run it after other 3 minutes with the same condition.
How can I achieve that ?
Don't schedule your UAT job as a separate job but instead trigger the launch once your first DEV pipeline finishes with success.
As you are using pipelines you actually have 2 solutions :
1)
Don't call another job but just call a Groovy function to integrate the DEV part, such as :
node() {
stage "UAT"
// Your existing UAT pipeline content here
stage "DEV"
git 'http://urlToYourGit/projectContainingYourDevScript'
pipeline = load 'functions.groovy'
pipeline.dev()
}
2) Just call a second Jenkins job with this kind of line :
node() {
stage "UAT"
// Your existing UAT pipeline content here
build job: "dev-job"
}
With these 2 solutions you can configure your first job to run every minute and it will trigger the second part/job only if the first one finishes with success (otherwise Jenkins will just fail the build as it would normally do).
I have configured 20 "Multi-configuration project" jobs in jenkins server(like, jobA, jobB, jobC, jobD, jobE, ....etc ), every job have seperate,these are the parent jobs. Now I created a single job(jobABC) with "Multi-configuration project". In "jobABC" I want to configure all 20 jobs to build one by one with condation(suppose jobA build SUCCESS then jobB build trigge, jobB build SUCCESS then jobC trigger and so on, otherwise if any job build failed then show the build is failed and don't trigger next job).
Actually, I have configured 20 individual jobs "Multi-configuration project" based job.
jobA
jobB
jobC
jobD
jobE
..... etc
Now, I want to configure one single job suppose ABCjob ("Multi-configuration project" based job).Inside ABCjob, I want to configure all 20 jobs and trigger automatically one after another but first one build success then trigger another job. if any stage failed then show fail and don't trigger another job.
I have many Jenkins Jobs that I need to run on every Build,
At present time I have 4 slave servers.
I would like the jobs to run in parallel as much as possible, hence I defined the jobs as follow:
Execute concurrent builds if necessary - Disabled
Restrict where this project can be run - Enabled with the following values SalveLinux1HT||SalveLinux2HT||SalveLinux3HT||SalveLinux4HT
To my understanding if Job A and B are triggered at the same time, one should use 1HT and the other should use 2HT and they can run in parallel
however Jenkins build job A on all 4 slaves and only after it's finished he will build job B on all 4 slaves
This is the opposite of my goal
Any ideas?
Thanks in advance
You can use
Build Flow Plugin
You can find both installation and configuration instructions of this plugin at the above mentioned link.
If you want to run any jobs in parallel you can use following scripts:
parallel (
// job A and B will be scheduled in parallel.
{ build("jobA") },
{ build("jobB") }
)
// jobC will be triggered after jobs A and B are completed
build("jobC")
i have 2 pipelines in jenkins and i need to run a final job if last 2 jobs in 2 pipelines are successfull.
job 1 ( which will build periodically at 7PM ) will call 2 jobs job_pipeline1_1 and job_pipeline2_1.
job1
job_pipeline1_1 -- job_pipeline1_2
job_pipeline2_1 -- job_pipeline2_2
job_final (should be called only after job_pipeline1_2, job_pipeline2_2 are successfull)
job_pipeline1_1 and job_pipeline1_2 are independent of job_pipeline2_1 and job_pipeline2_2 and will run on differnt servers.
job_final should be called only if job_pipeline1_2 and job_pipeline2_2 are successfull in that particular build.
job_final should be in the pipeline.
check this image "http://i.stack.imgur.com/58Upc.png"
Can any one help me in this regard?
Thanks in advance.
You can use Jenkins plugin "Build Flow Plugin" to run your jobs in parallel.
In that case your final job will be executed after completion of parallel jobs.
I have 4 jobs which needs to be executed in the following sequence
JOB A
|------> JOB B
|------> JOB C
|------> JOB D
In the above
A should trigger B & C parallely and C inturn triggers D.
A should hold the job as running till all 3 of them completed.
I tried the following plugins and couldn't achieve what I am looking for
Join Plugin
Multijob Plugin
Multi-Configuration Project
Paramterized Trigger Plugin
Is there any plugin which I haven't tried would help me in resolving this. Or is this can be achieved in a different way. Please advise.
Use DSL Script with Build Flow plugin.
try this Example for your execution:
build("job A")
parallel
(
{build("job B")}
{build("job C")}
)
build("job D")
Try the Locks and Latches plugin.
This may not be optimal way, but it should work. Use the Parameterized Trigger Plugin. To Job A, add a build step (NOT a Post Build Action) to start both Jobs B and C in the same build step AND block until they finish. In Job C, add a build step (NOT a Post Build Action) that starts Job D AND blocks until it is finished. That should keep Job A running for the full duration.
This isn't really optimal though: Job A is held open waiting for B and C to finish. Then C is held open until D is finished.
Is there some reason that Job A needs to remain running for the duration? Another possibility is to have Job A terminate after B and C are started, but have a Promotion on Job A that will execute your final actions after jobs B, C and D are successful.
I am trying to build a same system. I am building a certification pipeline where I need to run packager/build/deploy jobs and and corresponding test jobs. When all of them are successful, I want to aggregate the test results and trigger the release job that can do an automated maven release.
I selected Build pipeline plugin for visualization of the system. Initially tried with Parameterized trigger Plugin with blocking builds. I could not setup archiving the artifacts/fingerprinting and downstream build relationship this way since archiving the artifacts works only in postbuild. Then I put the Parameterized trigger in Post build activity. This way I was able to setup downstream builds, fingerprinting, aggregate test results but the build failures were not bubbling to upstream job chain and upstream jobs were non blocking
I was finally able to achieve this using these plugins-
Build Pipeline
MultiJob Plugin
FingerPrint Plugin
Copy Artifacts Plugin
Join Plugin
I'm using Jenkins 1.514
System looks like this
Trigger Job --> build (and deploy) Job (1..n) ---> Test Job (1..n)
Trigger Job -
Create as MultiJob and create a fingerprint file in shell exec
echo date +%s > fingerprint.txt
Trick is that file needs to be archived during the build, to do that execute this script-
ARCHIVEDIR=$JENKINS_HOME/jobs/$JOB_NAME/builds/$BUILD_ID/archive
mkdir $ARCHIVEDIR
cp fingerprint.txt $ARCHIVEDIR
Create MultiJob Phase consisting of build/deploy job.
Build/deploy job is itself a multijob
follow the same steps for creating build/deploy job as above relative
to fingerprinting.
Copy the fingerprint.txt artifact from upstream job
Setup MultiJob phase in deploy job that triggers the test job
create a new fingerprint file and force archive it similar to above step
Collect Junit results in the final test job.
In the trigger Job, use Join Plugin to execute the Release Job by choosing 'Run Post Build Actions at join' and execute the release project only on stable build of Trigger Job.
This way all the steps are showing up in Build Pipeline view and Trigger job is blocking for all downstream builds to finish and sets its status as the worst downstream build to give a decision point for release job.
Multijob Plugin
If you'd like to stop the mess with downstream / upstream jobs chains definitions. Or when you want to add a full hierarchy of Jenkins jobs that will be executed in sequence or in parallel. Add context to your buildflow implementing parameter inheritance from the MultiJob to all its Phases and Jobs. Phases are sequential while jobs inside each Phase are parallel.
https://wiki.jenkins-ci.org/display/JENKINS/Multijob+Plugin