I have Deployed Jenkins On a Server. The Server runs a CentOS Linux 8 as Operating system. I Wanted to access the Jenkins from another Device (laptop/PC) which is already in same network. but firewall restricts me in doing this. whenever i disable firewall I'm able to access the Jenkins but disabling firewall isn't option for me what else can i do to resolve this problem.
Well you need to open the ports used by Jenkins in the Centos Firewall. As I understand Jenkins uses ports 8080 and 8443 by default. See this guide on how to open and close ports in Centos 8
You can open the ports used by Jenkins/Tomcat using this command:
firewall-cmd --perm --add-port=your-port/your-protocol for example, to open port 8080 in tcp use this
firewall-cmd --perm --add-port=8080/tcp
After doing that, you have to reload the FirewallD tables using:
firewall-cmd --reload
The --perm option makes your rule permanent upon reboot.
I have a mongodb docker container I only want to have access to it from inside of my server, not out side. even I blocked the port 27017/tcp with firewall-cmd but it seems that docker is still available to public.
I am using linux centos 7
and docker-compose for setting up docker
I resolved the same problem adding an iptables rule that blocks 27017 port on public interface (eth0) at the top of chain DOCKER:
iptables -I DOCKER 1 -i eth0 -p tcp --dport 27017 -j DROP
Set the rule after docker startup
Another thing to do is to use non-default port for mongod, modify docker-compose.yml (remember to add --port=XXX in command directive)
For better security I suggest to put your server behind an external firewall
If you have your application in one container and MongoDb in other container what you need to do is to connect them together by using a network that is set to be internal.
See Documentation:
Internal
By default, Docker also connects a bridge network to it to provide
external connectivity. If you want to create an externally isolated
overlay network, you can set this option to true.
See also this question
Here's the tutorial on networking (not including internal but good for understanding)
You may also limit traffic on MongoDb by Configuring Linux iptables Firewall for MongoDB
for creating private networks use some IPs from these ranges:
10.0.0.0 – 10.255.255.255
172.16.0.0 – 172.31.255.255
192.168.0.0 – 192.168.255.255
more read on Wikipedia
You may connect a container to more than one network so typically an application container is connected to the outside world network (external) and internal network. The application communicates with database on internal network and returns some data to the client via external network. Database is connected only to the internal network so it is not seen from the outside (internet)
I found a post here may help enter link description here. Just post it here for people who needed it in future.
For security concern we need both hardware firewall and OS firewall enabled and configured properly. I found that firewall protection is ineffective for ports opened in docker container listened on 0.0.0.0 though firewalld service was enabled at that time.
My situation is :
A server with Centos 7.9 and Docker version 20.10.17 installed
A docker container was running with port 3000 opened on 0.0.0.0
The firewalld service had started with the command systemctl start firewalld
Only ports 22 should be allow access outside the server as the firewall configured.
It was expected that no one others could access port 3000 on that server, but the testing result was opposite. Port 3000 on that server was accessed successfully from any other servers. Thanks to the blog post, I have had my server under firewall protected.
I have a ELK docker swarm setup running across 4 different hosts. I am able to ping the containers which are on different host but when I try to run curl commands it is not connecting curl http://elastic:9200. Logstash and kibana applications are unable to connect to elasticsearch containers (3 node es cluster) which are on different hosts. I have opened all the ports mentioned in docker swarm documentation across all hosts https://docs.docker.com/engine/swarm/swarm-tutorial/#the-ip-address-of-the-manager-machine but no luck. After stopping firewall on all hosts, LS/Kibana are able to connect to elasticsearch.
Attempted to resurrect connection to dead ES instance, but got an error Unable to connect to Elasticsearch at http://es-proxy:9200/
Has anyone experienced this issue? Thanks.
I was able to resolve the issue by adding my docker network interface into a trusted zone.
https://success.docker.com/article/firewalld-problems-with-container-to-container-network-communications
Lastly, I added my docker subnet as a trusted source.
firewall-cmd --permanent --zone=trusted --add-source=subnet/range
When I deploy a service on a swarm using:
docker service create --replicas 1 --publish published=80,target=80 tutum/hello-world
I can access the service only from the ip of the node running the container. If I scale the service to run on both nodes, I can access the service from both ips, but it will never run from a container on the other node. (as confirmed by the tutum/hello-world image).
The documentation suggests that load balancing should work when it says:
Three tasks will run on up to three nodes. You don’t need to know which nodes are running the tasks; connecting to port 8080 on any of the 10 nodes will connect you to one of the three nginx tasks.
The swarm was created using swarm init and swarm join.
Using docker network ls the ingress swarm network is found on both nodes:
NETWORK ID NAME DRIVER SCOPE
cv6hk9wce8bf ingress overlay swarm
Edit:
Manager node runs linux, worker node runs OSX. Running modinfo ip_vs on the manager nodes returns:
filename: /lib/modules/4.4.0-109-
generic/kernel/net/netfilter/ipvs/ip_vs.ko
license: GPL
srcversion: D856EAE372F4DAF27045C82
depends: nf_conntrack,libcrc32c
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
parm: conn_tab_bits:Set connections' hash size (int)
Running modinfo ip_vs_rr returns:
filename: /lib/modules/4.4.0-109-
generic/kernel/net/netfilter/ipvs/ip_vs_rr.ko
license: GPL
srcversion: F21F7372F5E2331EF5F4F73
depends: ip_vs
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
Edit 2:
I tried adding a linux worker to the swarm, and it worked as advertised, so the problem appears to be related to the OSX machine.
The problem is solved for me, however, I'll let the question stay for future reference.
Ensure that 7946/tcp, 7946/udp, and 4789/udp are open and available to all nodes in the cluster BEFORE docker swarm init.
Not sure why, but if they are not open PRIOR to creating to the swarm, they will not properly load balance.
https://docs.docker.com/engine/swarm/ingress/
This happen to me, it was caused by a firewall issue. So I open the ports on every worker and manager.
sudo firewall-cmd --permanent --add-port=2377/tcp
sudo firewall-cmd --permanent --add-port=7946/tcp
sudo firewall-cmd --permanent --add-port=4789/udp
sudo firewall-cmd --reload
sudo reboot
Restart server if that doesn't work. Docker service may need to reload too.
This question already has answers here:
From inside of a Docker container, how do I connect to the localhost of the machine?
(41 answers)
Closed 12 months ago.
I have a docker container running jenkins. As part of the build process, I need to access a web server that is run locally on the host machine. Is there a way the host web server (which can be configured to run on a port) can be exposed to the jenkins container?
I'm running docker natively on a Linux machine.
UPDATE:
In addition to #larsks answer below, to get the IP address of the Host IP from the host machine, I do the following:
ip addr show docker0 | grep -Po 'inet \K[\d.]+'
For all platforms
Docker v 20.10 and above (since December 14th 2020)
On Linux, add --add-host=host.docker.internal:host-gateway to your Docker command to enable this feature. (See below for Docker Compose configuration.)
Use your internal IP address or connect to the special DNS name host.docker.internal which will resolve to the internal IP address used by the host.
To enable this in Docker Compose on Linux, add the following lines to the container definition:
extra_hosts:
- "host.docker.internal:host-gateway"
For macOS and Windows
Docker v 18.03 and above (since March 21st 2018)
Use your internal IP address or connect to the special DNS name host.docker.internal which will resolve to the internal IP address used by the host.
Linux support pending https://github.com/docker/for-linux/issues/264
MacOS with earlier versions of Docker
Docker for Mac v 17.12 to v 18.02
Same as above but use docker.for.mac.host.internal instead.
Docker for Mac v 17.06 to v 17.11
Same as above but use docker.for.mac.localhost instead.
Docker for Mac 17.05 and below
To access host machine from the docker container you must attach an IP alias to your network interface. You can bind whichever IP you want, just make sure you're not using it to anything else.
sudo ifconfig lo0 alias 123.123.123.123/24
Then make sure that you server is listening to the IP mentioned above or 0.0.0.0. If it's listening on localhost 127.0.0.1 it will not accept the connection.
Then just point your docker container to this IP and you can access the host machine!
To test you can run something like curl -X GET 123.123.123.123:3000 inside the container.
The alias will reset on every reboot so create a start-up script if necessary.
Solution and more documentation here: https://docs.docker.com/docker-for-mac/networking/#use-cases-and-workarounds
When running Docker natively on Linux, you can access host services using the IP address of the docker0 interface. From inside the container, this will be your default route.
For example, on my system:
$ ip addr show docker0
7: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
inet6 fe80::f4d2:49ff:fedd:28a0/64 scope link
valid_lft forever preferred_lft forever
And inside a container:
# ip route show
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 src 172.17.0.4
It's fairly easy to extract this IP address using a simple shell
script:
#!/bin/sh
hostip=$(ip route show | awk '/default/ {print $3}')
echo $hostip
You may need to modify the iptables rules on your host to permit
connections from Docker containers. Something like this will do the
trick:
# iptables -A INPUT -i docker0 -j ACCEPT
This would permit access to any ports on the host from Docker
containers. Note that:
iptables rules are ordered, and this rule may or may not do the
right thing depending on what other rules come before it.
you will only be able to access host services that are either (a)
listening on INADDR_ANY (aka 0.0.0.0) or that are explicitly
listening on the docker0 interface.
If you are using Docker on MacOS or Windows 18.03+, you can connect to the magic hostname host.docker.internal.
Lastly, under Linux you can run your container in the host network namespace by setting --net=host; in this case localhost on your host is the same as localhost inside the container, so containerized service will act like non-containerized services and will be accessible without any additional configuration.
Use --net="host" in your docker run command, then localhost in your docker container will point to your docker host.
The answer is...
Replace http://127.0.0.1 or http://localhost with http://host.docker.internal.
Why?
Source in the docs of Docker.
My google search brought me to here, and after digging in the comments I found it's a duplicate of From inside of a Docker container, how do I connect to the localhost of the machine?. I voted for closing this one as a duplicate, but since people (including myself!) often scroll down on the answers rather than reading the comments carefully, here is a short answer.
For linux systems, you can – starting from major version 20.04 of the docker engine – now also communicate with the host via host.docker.internal. This won't work automatically, but you need to provide the following run flag:
--add-host=host.docker.internal:host-gateway
See
https://github.com/moby/moby/pull/40007#issuecomment-578729356
https://github.com/docker/for-linux/issues/264#issuecomment-598864064
Solution with docker-compose:
For accessing to host-based service, you can use network_mode parameter
https://docs.docker.com/compose/compose-file/#network_mode
version: '3'
services:
jenkins:
network_mode: host
EDIT 2020-04-27: recommended for use only in local development environment.
EDIT 2021-09-21: IHaveHandedInMyResignation wrote it does not work for Mac and Windows. Option is supported only for Linux
I created a docker container for doing exactly that https://github.com/qoomon/docker-host
You can then simply use container name dns to access host system e.g.
curl http://dockerhost:9200
Currently the easiest way to do this on Mac and Windows is using host host.docker.internal, that resolves to host machine's IP address. Unfortunately it does not work on linux yet (as of April 2018).
We found that a simpler solution to all this networking junk is to just use the domain socket for the service. If you're trying to connect to the host anyway, just mount the socket as a volume, and you're on your way. For postgresql, this was as simple as:
docker run -v /var/run/postgresql:/var/run/postgresql
Then we just set up our database connection to use the socket instead of network. Literally that easy.
I've explored the various solution and I find this the least hacky solution:
Define a static IP address for the bridge gateway IP.
Add the gateway IP as an extra entry in the extra_hosts directive.
The only downside is if you have multiple networks or projects doing this, you have to ensure that their IP address range do not conflict.
Here is a Docker Compose example:
version: '2.3'
services:
redis:
image: "redis"
extra_hosts:
- "dockerhost:172.20.0.1"
networks:
default:
ipam:
driver: default
config:
- subnet: 172.20.0.0/16
gateway: 172.20.0.1
You can then access ports on the host from inside the container using the hostname "dockerhost".
For docker-compose using bridge networking to create a private network between containers, the accepted solution using docker0 doesn't work because the egress interface from the containers is not docker0, but instead, it's a randomly generated interface id, such as:
$ ifconfig
br-02d7f5ba5a51: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.32.1 netmask 255.255.240.0 broadcast 192.168.47.255
Unfortunately that random id is not predictable and will change each time compose has to recreate the network (e.g. on a host reboot). My solution to this is to create the private network in a known subnet and configure iptables to accept that range:
Compose file snippet:
version: "3.7"
services:
mongodb:
image: mongo:4.2.2
networks:
- mynet
# rest of service config and other services removed for clarity
networks:
mynet:
name: mynet
ipam:
driver: default
config:
- subnet: "192.168.32.0/20"
You can change the subnet if your environment requires it. I arbitrarily selected 192.168.32.0/20 by using docker network inspect to see what was being created by default.
Configure iptables on the host to permit the private subnet as a source:
$ iptables -I INPUT 1 -s 192.168.32.0/20 -j ACCEPT
This is the simplest possible iptables rule. You may wish to add other restrictions, for example by destination port. Don't forget to persist your iptables rules when you're happy they're working.
This approach has the advantage of being repeatable and therefore automatable. I use ansible's template module to deploy my compose file with variable substitution and then use the iptables and shell modules to configure and persist the firewall rules, respectively.
This is an old question and had many answers, but none of those fit well enough to my context. In my case, the containers are very lean and do not contain any of the networking tools necessary to extract the host's ip address from within the container.
Also, usin the --net="host" approach is a very rough approach that is not applicable when one wants to have well isolated network configuration with several containers.
So, my approach is to extract the hosts' address at the host's side, and then pass it to the container with --add-host parameter:
$ docker run --add-host=docker-host:`ip addr show docker0 | grep -Po 'inet \K[\d.]+'` image_name
or, save the host's IP address in an environment variable and use the variable later:
$ DOCKERIP=`ip addr show docker0 | grep -Po 'inet \K[\d.]+'`
$ docker run --add-host=docker-host:$DOCKERIP image_name
And then the docker-host is added to the container's hosts file, and you can use it in your database connection strings or API URLs.
For me (Windows 10, Docker Engine v19.03.8) it was a mix of https://stackoverflow.com/a/43541732/7924573 and https://stackoverflow.com/a/50866007/7924573 .
change the host/ip to host.docker.internal
e.g.: LOGGER_URL = "http://host.docker.internal:8085/log"
set the network_mode to bridge (if you want to maintain the port forwarding; if not use host):
version: '3.7'
services:
server:
build: .
ports:
- "5000:5000"
network_mode: bridge
or alternatively: Use --net="bridge" if you are not using docker-compose (similar to https://stackoverflow.com/a/48806927/7924573)
As pointed out in previous answers: This should only be used in a local development environment.
For more information read: https://docs.docker.com/compose/compose-file/#network_mode and https://docs.docker.com/docker-for-windows/networking/#use-cases-and-workarounds
You can access the local webserver which is running in your host machine in two ways.
Approach 1 with public IP
Use host machine public IP address to access webserver in Jenkins docker container.
Approach 2 with the host network
Use "--net host" to add the Jenkins docker container on the host's network stack. Containers which are deployed on host's stack have entire access to the host interface. You can access local webserver in docker container with a private IP address of the host machine.
NETWORK ID NAME DRIVER SCOPE
b3554ea51ca3 bridge bridge local
2f0d6d6fdd88 host host local
b9c2a4bc23b2 none null local
Start a container with the host network
Eg: docker run --net host -it ubuntu and run ifconfig to list all available network IP addresses which are reachable from docker container.
Eg: I started a nginx server in my local host machine and I am able to access the nginx website URLs from Ubuntu docker container.
docker run --net host -it ubuntu
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
a604f7af5e36 ubuntu "/bin/bash" 22 seconds ago Up 20 seconds ubuntu_server
Accessing the Nginx web server (running in local host machine) from Ubuntu docker container with private network IP address.
root#linuxkit-025000000001:/# curl 192.168.x.x -I
HTTP/1.1 200 OK
Server: nginx/1.15.10
Date: Tue, 09 Apr 2019 05:12:12 GMT
Content-Type: text/html
Content-Length: 612
Last-Modified: Tue, 26 Mar 2019 14:04:38 GMT
Connection: keep-alive
ETag: "5c9a3176-264"
Accept-Ranges: bytes
In almost 7 years the question was asked, it is either docker has changed, or no one tried this way. So I will include my own answer.
I have found all answers use complex methods. Today, I have needed this, and found 2 very simple ways:
use ipconfig or ifconfig on your host and make note of all IP addresses. At least two of them can be used by the container.
I have a fixed local network address on WiFi LAN Adapter: 192.168.1.101. This could be 10.0.1.101. the result will change depending on your router
I use WSL on windows, and it has its own vEthernet address: 172.19.192.1
use host.docker.internal. Most answers have this or another form of it depending on OS. The name suggests it is now globally used by docker.
A third option is to use WAN address of the machine, or in other words IP given by the service provider. However, this may not work if IP is not static, and requires routing and firewall settings.
PS: Although pretty identical to this question here, and I posted this answer there, I first found this post, so I post it here too as may forget my own answer.
The simplest option that worked for me was,
I used the IP address of my machine on the local network(assigned by the router)
You can find this using the ifconfig command
e.g
ifconfig
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether f0:18:98:08:74:d4
inet 192.168.178.63 netmask 0xffffff00 broadcast 192.168.178.255
media: autoselect
status: active
and then used the inet address. This worked for me to connect any ports on my machine.
When you have two docker images "already" created and you want to put two containers to communicate with one-another.
For that, you can conveniently run each container with its own --name and use the --link flag to enable communication between them. You do not get this during docker build though.
When you are in a scenario like myself, and it is your
docker build -t "centos7/someApp" someApp/
That breaks when you try to
curl http://172.17.0.1:localPort/fileIWouldLikeToDownload.tar.gz > dump.tar.gz
and you get stuck on "curl/wget" returning no "route to host".
The reason is security that is set in place by docker that by default is banning communication from a container towards the host or other containers running on your host.
This was quite surprising to me, I must say, you would expect the echosystem of docker machines running on a local machine just flawlessly can access each other without too much hurdle.
The explanation for this is described in detail in the following documentation.
http://www.dedoimedo.com/computers/docker-networking.html
Two quick workarounds are given that help you get moving by lowering down the network security.
The simplest alternative is just to turn the firewall off - or allow all. This means running the necessary command, which could be systemctl stop firewalld, iptables -F or equivalent.