I am writing a stored procedure where I want to pass in the field name and data then in the procedure use the field name to reference to field to insert / update:
BEGIN
INSERT INTO trainees (txtTrainee, _field) VALUES (_txtTrainee, _data)
ON DUPLICATE KEY UPDAYE _field=VALUES(_field);
END
The parameters passed into the procedure are:
_txtTrainee, this is a TEXT field and contains the host name to use
_field, this is a TEXT field and contains the field name to modify
_data, this is a VARCHAR(16) and contains the data to insert or update
I can see I need some kind of translation function to get the contents of _field.
I'm using MariaDB 10.8
The solution is to use a prepared statement:
BEGIN
SET #SQL = CONCAT("INSERT INTO trainees (txtTrainee,?)",
"VALUES(?,?)",
"ON DUPLICATE KEY UPDATE ?=VALUES(?)");
PREPARE stmt FROM #SQL;
EXECUTE stmt USING _field,_txtTrainee,_data,_field,_field;
END
Related
Need help on getting query on a text file using stored procedure in db2. I'm very new to this so please help.
Till now i am able to create a file and get get data in created file. But i want a complete query in the file not a single column data.
I have created a Stored Procedure like this
CREATE or replace PROCEDURE SCOPEMASTERP(my_statement varchar(10000))
AUTONOMOUS
BEGIN
DECLARE v_filehandle UTL_FILE.FILE_TYPE;
DECLARE v_dirAlias VARCHAR(50) DEFAULT 'mydir';
DECLARE v_filename VARCHAR(100) DEFAULT 'bluestar_transaction-';
DECLARE v_format VARCHAR(200);
SET v_format = '%s\n';
set v_filename = concat(v_filename, VARCHAR_FORMAT(current_date, 'DD-MM-YYYY'));
set v_filename = concat(v_filename, '.log');
CALL UTL_DIR.CREATE_OR_REPLACE_DIRECTORY('D:', '/archivelog/asd/');
SET v_filehandle = UTL_FILE.FOPEN(v_dirAlias,v_filename,'a');
CALL UTL_FILE.PUTF(v_filehandle,v_format, my_statement);
CALL DBMS_OUTPUT.PUT_LINE('Wrote to file: ' || v_filename);
CALL UTL_FILE.FCLOSE(v_filehandle);
END
and i have created a trigger inside trigger i am calling stored procedure
CREATE OR REPLACE TRIGGER SCOPEMASTER_Trigger
AFTER INSERT ON SERVEIT.SCOPENAMEMASTER
REFERENCING NEW AS N
FOR EACH ROW
BEGIN ATOMIC
call SCOPEMASTERP(N.SCOPENAMEID);
END
insert statement i am executing
Insert into SERVEIT.SCOPENAMEMASTER (SCOPENAMEID) values (1013)
GO
And file which is creating in "D" drive i am getting
But instead of just getting 1013 i need the complete query in the file
Insert into SERVEIT.SCOPENAMEMASTER (SCOPENAMEID) values (1013)
What changes i need to do please help. Thanks in advance!!
There are no special registers/variables/etc. available in DB2 that provide the SQL statement that is being executed, so what you're asking for is not possible.
I'm looking for help with a stored procedure in teradata. I want to update a whole table and for this I'm trying to use a for loop cursor. the problem is that my update is defined via column names passing through parameters to the SP.
I've seen it can be possible to use dynamic sql to do that but I haven't found any information on the subject concerning for loop cursor and dynamic sql. Is it possible with FOR LOOP CURSOR ?
I've tried to do only the select and calculs with dynamic sql, it works fine but then the problem is to update the table from the cursor on the select. In this case how to update a table from my cursor?
I let you show my code.
loop cursor :
REPLACE PROCEDURE [database].calDELAI
(
IN dateDebut VARCHAR(30),
IN dateFin VARCHAR(30),
IN delay VARCHAR(30)
)
BEGIN
DECLARE DATE_DEBUT_COLONNE VARCHAR(64);
DECLARE DATE_FIN_COLONNE VARCHAR(64);
SET DATE_DEBUT_COLONNE=dateDebut;
SET DATE_FIN_COLONNE=dateFin;
FOR for_loop_update AS cur_select_set CURSOR FOR
SELECT
TMP.DATE_FIN_COLONNE-TMP.DATE_DEBUT_COLONNE
FROM [database].ORD_T_DETL_ORDR_DELAI AS TMP
/* the select is more complicated but here is the spirit of it.*/
DO
IF (delay='DELAI1') THEN SET DELAI1=NB_JR_OUVRABLE;
END IF;
END FOR ;
END ;
The errors given by teradata are :
SPL1027:E, Missing/Invalid SQL statement'E(3810):Column/Parameter '[database].TMP.DATE_FIN_COLONNE' does not exist.'.
SPL2001:E, Undefined symbol 'DELAI1'.
SPL2001:E, Undefined symbol 'NB_JR_OUVRABLE'.
Thanks in advance for your replies and your help.
The call statement should contain all the input Paramenters , make sure you are specifying all the input parameters correctly. Could you please provide your call statement.
I'm using Firebird 2.x and I have made a stored procedure to insert a record if it doesn't exist and return its ID into a variable.
But when I execute, it turns out that the following error occurs:
Dynamic SQL Error. SQL error code = -104. Unexpected end of command - line 2, column 76.
Full source code of my SP following:
CREATE PROCEDURE INSERT_ADMIN_OFFICE
AS
DECLARE VARIABLE OFF_ID BIGINT;
DECLARE VARIABLE PER_ID BIGINT;
DECLARE VARIABLE EMP_ID BIGINT;
DECLARE VARIABLE AP_ID BIGINT;
BEGIN
IF (NOT EXISTS(SELECT * FROM OFFICE OFF WHERE OFF.DESCRIPTION LIKE '%Administrador%')) THEN
INSERT INTO OFFICE (DESCRIPTION) VALUES ('Administrador') RETURNING ID INTO :OFF_ID;
ELSE
SELECT OFF.ID FROM OFFICE OFF WHERE OFF.DESCRIPTION LIKE '%Administrador%' INTO :OFF_ID;
INSERT INTO PERSON (NAME, BIRTH_DATE, ADDRESS, DISTRICT, CITY, STATE) VALUES ('Intellitools Desenvolvimento de Software Ltda.', '01/01/2007', 'Rua Nunes Machado, 472 - Cj 503', 'Centro', 'Curitiba', 'PR') RETURNING ID INTO :PER_ID;
INSERT INTO USER_PASSPORT (PERSON_ID, USER_NAME, PWD, TYPE) VALUES (:PER_ID, 'intellitools', 123, 1);
INSERT INTO EMPLOYEE (OFFICE_ID, PERSON_ID) VALUES (:OFF_ID, :PER_ID) RETURNING ID INTO :EMP_ID;
INSERT INTO ACCESS_PROFILE (DESCRIPTION) VALUES ('Administrador Geral') RETURNING ID INTO :AP_ID;
INSERT INTO REL_EMPLOYEE_ACCESS_PROFILE (EMPLOYEE_ID, ACCESS_PROFILE_ID) VALUES (:EMP_ID, :AP_ID);
SUSPEND;
END
;
I notice that this error is because of the INTO on the INSERT but I can't find another way to do that.
I appreciate your help!
Just remove SUSPEND and your proc will execute like a charm. For a one time actions I would suggest EXECUTE BLOCK instead of creating stored procedure.
I am trying to create a BEFORE INSERT trigger that will check the incoming value of a field, and replace it with the same field in another row if that the field is null. However, when I add the CALL statement to my trigger, an error is returned "The trigger "ORGSTRUCT.CSTCNTR_IN" is defined with an unsupported triggered SQL statement". I checked the documentation and saw that cursors weren't supported in the BEFORE (part of the reason for making the stored procedure in the first place), but even when I remove the cursor declaration from the stored procedure the call still generates the same error.
Trigger:
CREATE TRIGGER orgstruct.cstcntr_IN
NO CASCADE
BEFORE INSERT ON orgstruct.tOrgs
REFERENCING NEW AS r
FOR EACH ROW MODE DB2SQL
BEGIN ATOMIC
DECLARE prnt_temp BIGINT;
DECLARE cstcntr_temp CHAR(11);
SET prnt_temp = r.prnt;
SET cstcntr_temp = r.cstcntr;
CALL orgstruct.trspGetPrntCstCntr(prnt_temp,cstcntr_temp);
SET r.cstcntr = cstcntr_temp;
END
Stored procedure:
CREATE PROCEDURE orgstruct.trspGetPrntCstCntr (
IN p_prnt BIGINT,
OUT p_cstcntr CHAR(11)
)
SPECIFIC trGetPrntCstCntr
BEGIN
IF p_prnt IS NULL THEN
RETURN;
END IF;
BEGIN
DECLARE c1 CURSOR
FOR
SELECT cstcntr
FROM orgstruct.tOrgs
WHERE id = p_prnt
FOR READ ONLY;
OPEN c1;
FETCH FROM c1 INTO p_cstcntr;
CLOSE c1;
END;
END
According to the documentation, CALL is allowed in a BEFORE trigger, so I don't understand what the problem is.
A before trigger can call a stored procedure, but the stored proc can't do anything not allowed in the trigger.
In your case, the default level of data access for a SQL stored proc is MODIFIES SQL DATA, which is not allowed in the trigger. You could recreate your stored procedure, changing the data access level to READS SQL DATA; this will allow you to create the trigger.
However: There is no reason to call a stored procedure for something this simple; You can do it using a simple inline trigger:
create trigger orgstruct.cstcntr_IN
no cascade
before insert on orgstruct.tOrgs
referencing new as r
for each row
mode db2sql
set r.cstcntr = case
when r.p_prnt is not null
then (select cstcntr from tOrgs where id = r.p_prnt fetch first 1 row only)
else r.cstcntr
end;
This will be a LOT more efficient because it eliminates both the stored procedure call and the cursor processing inside the stored proc. Even if you wanted to use the stored proc, you could eliminate the cursor inside the stored proc and improve performance.
FYI: the logic that you posted contains an error, and will always set CSTCNTR to NULL. The trigger posted in this answer not do this. :-)
I cannot run the following SP
CREATE PROCEDURE SP_NYANSAT(
FORNAVN VARCHAR(30),
EFTERNAVN VARCHAR(30),
ADRESSE VARCHAR(50),
POSTNUMMER CHAR(4),
TELEFONNUMMER CHAR(8),
EMAIL VARCHAR(50))
AS
DECLARE VARIABLE ID INTEGER;
BEGIN
ID = GEN_ID(GEN_ANSAT_ID,1);
INSERT INTO MYTABLE (ID, FORNAVN, EFTERNAVN, ADRESSE, POSTNUMMER, TELEFONNUMMER, EMAIL) VALUES (:ID, :FORNAVN, :EFTERNAVN, :ADRESSE, :POSTNUMMER, :TELEFONNUMMER, :EMAIL);
END
The error I get is the following:
can't format message 13:896 -- message file C:\Windows\firebird.msg not found.
Dynamic SQL Error.
SQL error code = -104.
Token unknown - line 3, column 1.
CREATE.
Have you used Set Term before and after this code?
All commands in Firebird must be terminated with a semi-colon. If you want to create a stored procedure you need to be able to distinguish between the terminating semi-colon from the semi-colons inside the stored procedure.
Something like this:
SET TERM ^ ;
CREATE PROCEDURE SP_NYANSAT(
FORNAVN VARCHAR(30),
EFTERNAVN VARCHAR(30),
ADRESSE VARCHAR(50),
POSTNUMMER CHAR(4),
TELEFONNUMMER CHAR(8),
EMAIL VARCHAR(50))
AS
DECLARE VARIABLE ID INTEGER;
BEGIN
ID = GEN_ID(GEN_ANSAT_ID,1);
INSERT INTO MYTABLE (ID, FORNAVN, EFTERNAVN, ADRESSE, POSTNUMMER, TELEFONNUMMER, EMAIL) VALUES (:ID, :FORNAVN, :EFTERNAVN, :ADRESSE, :POSTNUMMER, :TELEFONNUMMER, :EMAIL);
END
^
SET TERM ; ^
Please notice how the declaration of the stored procedure is terminated with ^, thus ending the statement. After the declaration you also restore the terminating semi-colon.
On a side note, I would recommend to copy firebird.msg to the location the error you get tells you so you can see what is really happening.
EDIT:
If you wish you can check this link. There you can find a lot of information regarding Firebird + IBExpress, including SET TERM (page 81).
EDIT 2:
Just tried at home with IBExperts + Firebird and I had no problem creating the stored procedure. My guess is you are trying to do one of the following things:
You have opened an SQL editor and are trying to compile the code directly. That will not work because IBExperts thinks you are trying to run DSQL sentences. Stored procedures are created with PSQL sentences.
You are trying to use the "New procedure" utility (check buttons in the upper right side of the main menu) and pasted the whole code into the editor. That will not work because in that editor you only have to put the body code. Stored procedure name is set in a field on the upper right side of the window you opened. Parameters and variables are introduced by using the "Insert Parameter/Variable" button on the left side above the code editor. The SET TERM sentences are created automatically by IBExperts. You can check the resulting code in the DDL tab.
HTH