I have a sheet that looks like this:
I would like to be able to pull all values from column A that meet one criteria specified (preferably from another cell) and search columns B and C. For example, if I were to select Grass in the formula, the results would look like this:
Try in E3:
=Filter(A1:A,(B1:B=G1)+(C1:C=G1)>=1)
a1:a - is column you want to see
b1:b=g1 and c1:c=g1 these are logic tests that return 1 when true
So when one or more columns contain content of G1 (grass) then condition is met and content of cell from column A is displayed.
Related
I have an Google sheets file with two sheets. I'm trying to reference one sheet's text based on two cells of criteria using a formula in the other sheet. I have one sheet that looks similar to this -
And another that looks like this -
I would like to put a formula on the second sheet that basically says - look on the first sheet for the values in columns A and B and return me the value in column C. The tricky part is - the values in the second sheet may be inverted or there may be an instance where only one value is present, like in row 1 in the first sheet. Also the formula should only fill in a value if both columns match. All text combinations in both sheets are unique.
Is it possible to do this with text? Thank you for your help!
Try the following
=ArrayFormula((IFERROR(VLOOKUP(R2:R&S2:S,{O2:O&P2:P,Q2:Q},2,0))&
IFERROR(IF((R2:R<>"")*(S2:S<>""),VLOOKUP(R2:R&S2:S,{P2:P&O2:O,Q2:Q},2,0),""))))
(Do adjust locale and ranges according to your needs)
Functions used:
ArrayFormula
IFERROR
IF
VLOOKUP
If you can use two keys concated in the lookup table as a virtual key (i.e. make a key like "CAT|DOG"), then you can use that to look in the secondary table.
If you can't guarantee the sort order of the two keys in the secondary table, you can use the following technique to "sort" the two keys so you can make a single lookup key that's always in one stable order.
Sample Table
A
B
C
D
E
SortedKey
Cat
Dog
TRUE
Cat
Dog
CatDog
Dog
Cat
FALSE
Cat
Dog
CatDog
Formulas
Sample formulas for row #1.
For column C, use formula: =A1<B1
For column D, use formula: =IF(C1=TRUE, A1, B1)
For column E, use formula: =IF(C1=TRUE, B1, A1)
For SortedKey, use formula: =concat(D1, E1)
In my data sheet1, I want to use the 'Name in use' column (B) with the last two names with ARRAYFORMULA.
In my data sheet2, I want column (B) to be repeated with the same code next to the column A get filled
Please find the sample date sheet below https://docs.google.com/spreadsheets/d/1_AWRjexJNAcgNGsmrBKU_8JYL03UbAGeiyy4oI8B9fU/edit?usp=sharing
Regards,
Nimal PereraSri Lanka
Sheet 1
Your formula seems fine, just the ArrayFormula() needs tweaking. As noted in the docs, ArrayFormula() takes in a range, rather than a single cell.
You would have to do something like this:
=ARRAYFORMULA(IFERROR(UPPER(TRIM(RIGHT(SUBSTITUTE(A2:A5," ",REPT(" ",60)),120)))))
Essentially you type in the range you'd like it to apply on. So at any moment, instead of selecting a single cell for that row, you select the range. If you'd want to apply it to the entire column, use A2:A. You even did it right on sheet2
Sheet 2
Your names seem to be importing correctly once Sheet1 is done right. To have the same code everywhere, use something like this:
=ARRAYFORMULA(IF(LEN(A2:A),"SSD",""))
I have a sheet with the following columns:
Column 1: contains text of the form "TS001", "TS002", "DR001", "MS002" etc.
The 2 letter in the beginning are a code for the manufacturer name, so for example "MS=Microsoft".
For the second column, I would like to have a formula that goes through the first column and searches for those letters, in order to then return the complete name of the manufacturer.
For example, it should look something like this:
Column 1
Column 2
MS001
Microsoft
TS002
Tesco
DR001
DR. Pepper
TS003
Tesco
Is something like that possible?
Thank you very much!
When you say "MS=Microsoft" it implies somewhere you have a table with that reference. For the purposes of the following example I created a sheet named ReferenceTable where column A contains the two letter code, and column B contains the name of the company. So it looks like this:
A
B
MS
Microsoft
TS
Tesco
And now in the main sheet in column B you would write the following formula:
=ARRAYFORMULA(VLOOKUP(MID(A1:A,1,2),ReferenceTable!A1:B,2,FALSE))
This will give you the name of the company, looked up from the reference table.
The array formula is there so that you only have to put this formula in cell B1, and assumes you will use the ReferenceTable sheet as a list; that way as you add records to Column A Column B is populated by the arrayformula in B1.
I'd simply use a Reference Table and a VLOOKUP formula
If cell B7 contains "MS0001"
the following formula will attempt to match just the first two letters again a reference table located in cells O7:P9
=VLOOKUP(MID(B7,1,2),O7:P9,2,FALSE)
and will return "Microsoft" when it finds "MS"
In order to achieve what you want, somewhere you need to have a list of the two letter codes and the corresponding company name.
As with all vba, there’s any number of ways to do this, but I would probably put the two letter code and company data into an array, then iterate through col1 to create the desired output for col2.
E.g below assumes the two letter code and company names are in col3 and col4 respectively, but you can change it to wherever they’re located.
Sub CompName()
Dim Cmpname () as string
Dim col1 as range, rng as range
Cmpname = range(range(“C1”), range(“D1048576”).end(xlup))
Set col1 = range(range(“A1”), range(“A1048576”).end(xlup))
For each rng in col1
For i = lbound(Cmpname, 1) to ubound(Cmpname, 1)
If left(rng, 2) = Cmpname(i, lbound(Cmpname, 2)) then
rng.offset(0,1) = Cmpname(i, ubound(Cmpname, 2))
Exit For
End if
Next
Next
End Sub
I’ve admittedly just written this on my phone and have not tested it, but hopefully there’s minimal mistakes.
I just reread your question and realized that you may actually want a formula rather than vba code.
If this is correct, using an INDEX MATCH is probably your best bet.
In this example I’ll assume the same setup as described above - col3 has company codes and col4 has company name - and this formula can be inserted into cell B1:
=index(D:D,match(left(A1,2),C:C,0))
You can then just filldown for the rest of the entries in col2.
Again, done from memory without testing so hopefully got it right.
I am looking to take several columns in Google Sheets and combine them into one with the column header in an adjacent cell.
I would like to go from something like this:
to something like this:
I am currently achieving this by arraying the first column over and over for the number of columns. I am then arraying each column on on top of another so something like this:
Column 1 Column 2
={A1:A4;A1:A4;A1:A4} ={B1:B4;C1:C4;D1:D4}
In a third column I am using an if-then statements to get the Column name wherever the name column = "Name"
My issue is when I am trying to do this with several columns is becomes very tedious to build out these arrays. I am looking for help with a single formula to achieve this by just referencing the range for all columns.
It's a little tricky, but possible. For explanatory reason I am not putting everything into one, convoluted formula, but present step by step solution. DISCLAIMER: It's fast one, so it in not perfect.
Assumptions:
"Start" data are in Sheet named "Data"
Result is in Sheet named "Result"
Procedure
Add one column (A) to "start" data with this code in A1 (it will be our index):
=ArrayFormula(if(B1:B<>"";row(A1:A)-1;""))
In "Result" sheet put in A1 this code:
=ArrayFormula(INT((ROW(B1:INDIRECT("C"&(COUNTA(Data!$B1:B)-1)*4))-1)/4)+1)
In B1 this code:
=ArrayFormula(if(A1:A<>"";VLOOKUP(A1:A;Data!A1:E;2;0);"" ))
In C1 this:
=transpose(SPLIT(REPT(TEXTJOIN("*";1;Data!C1:1)&"*";COUNTUNIQUE(B1:B));"*";0;0))
In D1 this:
=ArrayFormula(IFERROR( VLOOKUP(B1:B;Data!B1:F;MATCH(C1:C;Data!B1:F1;0));""))
Finally in F1 - to clean the result put this:
={{"Name"\"Column"\"Number"};{B1:D20}}
Link to working copy
Link to spreadsheet
Final thoughts
You can pack everything into one formula
Its very hasty solution, so it will not expand to more than 4 columns by itself (One, Two, etc). This is hard-coded now. If you can't figure it out, just give me a comment - I will show this places / fix them to make it dynamic
I have a data set that looks like this: starting on A1 with "1"
1 a
2 b
3 c
4 d
Column A is an arrayformula =arrayformula(row(b1:b))
Column B is manual input
i want to query the database and finding the row of the item by match column B so i have code as such
=query("A1:B","select A where B like '%c%')
this should give me "3"
My question:
is there a way to pull the 1-4 numbers into the query line? with something like array formula row(b1:b). I don't want to waste an extra column on column A
so basically I want just the manual input and when i query it gives me the row number.
No script code please.
I've tried a few things and it didn't work.
Looking for a solutions that starts with
=query()
You can also use a formula to pull in more than one row in the dataset which matches the condition, if this is important to you:
=arrayformula(filter(row(B:B); B:B="c"))
And you can have wildcard type operators, under certain circumstances (you are going to match text or items that can look like text (so numbers can be treated as text - but boolean will need more steps); that the dataset is not huge), using regular expressions. e.g.
=arrayformula(filter(row(B:B); regexmatch(B:B, "(c|d)")))
You could also use standard spreadsheet wildcard operators, e.g.
=arrayformula(filter(row(B:B); countif(B:B, "*c*")))
Explanation: In this case, the filter will be true when countif is greater than zero, i.e. when it sees something with a letter c in it, since spreadsheets see a value greater than zero as a boolean true and so, for that row where there is a countif match, there will be a a filter match, and so it will display that row (indeed, it is a similar situation with the regexmatch creating a true when there is a match of either c or d, in the case above).
Personally, I wanted to learn regex a bit, so I would go towards the regexmatch option. But that is your choice.
You can also, of course, create the match outside of the cell. This makes it easy to create a list of matches that you want to satisfy elsewhere on the sheet. So you could have a column of words or parts of words, from Z2 downwards, and then join them together in cell Z1 for example like this
="("&join("|",filter(Z2:Z50,len(Z2:Z50)))&")"
Then your filter function would look like this:
=arrayformula(filter(row(B:B), regexmatch(B:B, Z1)))
If you want to use like operator in the query function, you can try something like this:
=arrayformula(query(if({1,0}, B:B,row(B:B)),"select Col2 where Col1 like '%c%' "))
You can also use the regular expressions in the query function, for example:
=arrayformula(query(if({1,0}, B:B,row(B:B)),"select Col2 where Col1 matches '(.*c.*|.*d.*)' "))
I'm not entirely clear on the question, but as I understand it, you want to be able to enter a formula, and have it return the row number of the matched item in a range? I'm not sure where array formulas come in.
If I've understood your question correctly, this should do the trick:
=MATCH("C",B1:B,0)
In your example, this returns 3.
Please forgive me if I've misunderstood your question.
Note: If there are multiple matches, this will return the row number for the first instance of your search.
=QUERY({A1:A,ARRAYFORMULA(ROW(A1:A))},"SELECT Col2 WHERE Col1 LIKE '%c%'")