I can't figure out how to copy from vim, and paste to another console tab.
For instance, I'm using the preconfigured nvimdocker / ansible-neovim-pyright container. I did try:
set mouse= I can copy/paste with middle click, but I get the column with line numbers in the clipboard. Makes it unpracticable to copy few lines of script.
set mouse=nv This is great, I can select the text without the line numbers. Potentially right-click->Copy. But none of the * (highlight clipboard) nor + (system clipboard) registers are working. (None of the middle-click or explicit paste will work).
Obviously, it's not possible to access the system clipboard from remote, and xclip cannot help. I think the problem is similar when using a remote nvim through SSH (with no X redirection).
But how could I have the 'highlight' clipboard ? Is there maybe a (n)vim command to temporarily disable the left column with numbers/git/modifs/coc-errors ?
Thanks,
In Visual Studio Code Ctrl+V is not working on editor.
However from the command palette Ctrl+Shift+V is working.
I´ve had this problem when I enabled the "VIM" plugin for VSCode.
After uninstalling it, the problem was fixed.
Open the keyboard shortcuts preferences by pressing CTRL + SHIFT + P and search for open keyboard shortcuts file.
Then, search for the editor.action.clipboardPasteAction property. In your case, it might be CTRL+SHIFT+V. Try changing it to Ctrl + V. Like so:
Solution as of 2022
You could also CTRL + SHIFT + P and search for open keyboard shortcuts (JSON) and paste the following:
// Place your key bindings in this file to override the defaults
[
{
"key": "ctrl+v",
"command": "-workbench.action.terminal.sendSequence",
"when": "terminalFocus && !accessibilityModeEnabled && terminalShellType == 'pwsh'"
},
{
"key": "ctrl+k",
"command": "workbench.action.terminal.clear"
}
]
#WebD'is answer is very helpful and I have upvoted it. But my comment focused on whether there was a conflicting binding for CTRL-V and how to find it. You can literally type "Ctrl+V" (note the "plus+" sign, not a hyphen) and it will find all keybindings that use that binding in whole or part. I suggest that there must be a something else also bound to CTRL-V.
Since this original answer, vscode introduced another way to see what other commands might be bound to given keystrokes. With the Gear/Keyboard Shortcuts file open click on the little keyboardy icon to the right (or Alt+K with this file open) and it will indicate Recording Keys next to it. Now you can literally press Ctrl+V (or whichever keybinding you are interested in) and those corresponding commands, if any, that use that keybinding will be filtered up.
Remember to disable the Recording Keys functionality by clicking the keyboardy icon if you want to go back to regular searching in the Keyboard Shortcuts file.
I have the same problem: can't CTRL+X, CTRL+C, CTRL+V on VSCode editor.
I uninstall the Vim extension and the problem is fixed.
If you install the vim extension for visual studio code and find that ctrl + x, ctrl + v .. or other shortcuts stopped working, this is because they are overwritten by extension.vim_
If you prefer to get those shortcuts back go to keyboard shortcuts (ctrl + shift + p, then search for open keyboard shortcuts file).
Search for extension.vim_ and check too see if any shortcuts are
assigned to your key combination like ctrl + v. Remove it (right click, delete).
Also check for any other conflict by searching the file.
Save the file, it should work now.
For future searchers who do not have Vim (or any other extension) installed which is causing the issue, and who might have verified that their keyboard bindings are correct....
I have the Salesforce Extension Pack installed and had right-clicked on a file and run SFDX: Deploy Source to Org. The deployment had errors, so in the Panel area (which I have at the bottom of my screen) [see image] I had clicked on both the OUTPUT and PROBLEMS tabs, which shifted focus away from my PowerShell TERMINAL tab.
My Ctrl-V issue was when I was trying to correct my Apex code in the EDITOR pane. Ctrl-V was not pasting the code I had just Cut or Copied (but right-clicking and choosing Paste was working).
I ultimately discovered, when I changed my Panel focus back to my PowerShell TERMINAL tab, that ALL of the Ctrl-V pasting I had attempted had shown up after my PowerShell prompt! ["circled" in blue in image]
tl;dr
Make sure your pasted text did not show up in your TERMINAL - even if it is not in focus or even if your cursor is in another Panel tab or in the EDITOR.
From File > Performance > Keyboard Shortcuts > search paste > just try to remove or rest some keybinding with right click on paste or default:paste
If you have the Vim extension installed, you may set the vim.useSystemClipboard in the vim extension setting to true. Then you can paste the content from the clipboard by simply pressing p in the NORMAL mode, or use Ctrl+V in the INSERT mode.
This problem happened to me after I left VSC update itself (currently 1.53.0). It had been converted to Shift-Insert.
Go to File->Preferences->Keyboard shortcuts. Find the editor.action.clipboardPasteAction and double click it, then type Ctrl+V.
+1 for this - in case this helps anyone:
In my case it was only happening in the Thunder Client extension's text fields.
The culprit for me was the Indent on Paste extension (I'm on a Mac, so it was cmd+v instead of ctrl+v - but it fires the same event in VS Code).
I've left issue comments on the Thunder Client and Indent on Paste repos respectively, should anyone wish to add to those.
Look if and remove any VS Code extension :
for example - "Awesome Emacs Keymap" in my case, or any other keymaps installed.
i.e. : FILE/Preferences>/extensions and then look if any special keymap was installed
Modify the setting of vscode:
Settings - input:vim ctrl key - unselect: Enale some vim ctrl key commands that override otherwise common operations, like ctrl + c
go to extensions search Emacs keymap and uninstall it
There should something conflicting to your any previous keyboard shortcut
like in my case for Change All Occurrence: (Ctrl-C + Ctrl-A), vs code, confused with
Ctrl-C for a copy shortcut to this : (Ctrl-C + Ctrl-A), so I change this to (Shift-C + Shift-A), My Issue resolved.
Go to File>Preference>keyboard Shortcuts
Then Check for Copy and paste and enter the Ctrl+C and Ctrl+v shortcuts
Happy Coding ;)
None of the issues above solved this for me. I had a key binding Ctrl+C Ctrl+L. So when I pressed Ctrl+C it was in a state where it was waiting for the next key to be pressed and wouldn't do anything.
This showed up in the toolbar like so (an example):
This didn't come up in the list of keybindings when searching for Ctrl+C. So I found it be looking through the list.
Remove all cmd+v or in windows ctrl+v associated keybindings.
For me the solution was going through my extensions and disabling them one by one to find the culprit.
I had 'Paste and Indent' enabled which was messing up copying and pasting.
Just had to disable it and reload vs code.
Open Settings > keyboard shortcuts
Search for Ctrl + c
Delete the mapping for vim.
i have same problem
step:1
ctrl+shift+p
step:2 find
Open keyboard shortcuts
step:3
find paste
then you can see
editor.action.cliboardPasteAction
right click then changekeybinding if key wrong
or remove key if u found two same line(editor.action.cliboardPasteAction)
in my case is 2nd one(so i removed)
In some cases, if you use remote ssh connects to a remote server and code there, ctrl + V may not be useful because that your remote server has a high balance, you can try to uninstall some useless plugins in that remote server then reload vscode.
I have disabled all extensions, and VS Code hangs for a few seconds whenever I try to paste something. This occurs with Ctrl+V, Shift+Ins and also with right click + Paste.
It hangs, and then nothing happens.
[UPDATE]
I simply reinstalled it, and that solved the issue for me.
In my case just the relaunch of VSCode solved the issue. My key bindings were fine.
"Paste JSON as Code" was my offender, as well as a few other ones. I got a little extension happy there for a bit.
Its easy don't worry, you need to search using ctrl+shift+p and find Prefernces: Open Keyboard Shortcuts(JSON) and add this dict
// Place your key bindings in this file to override the defaults
[
{
"key": "ctrl+c",
"command": "editor.action.clipboardCopyAction",
"when": "textInputFocus"
}
]
I thins it's very helpfull good luck :)
This question already has answers here:
How to associate a program with a file type, but only for the current user?
(2 answers)
Closed 8 years ago.
How can i auto-open a custom extension in my Delphi app ? I'm trying to make application
that loads text files but with a different extension.
Example : Text.DZ | all i want is when i click the file with .DZ Extension it opens my app automatically and loads the text inside into the memo1.lines.text.
I know that i have to register my new custom extension but i have no idea how to do it and
load the text into my app.
Also if you can include a source-code example that would be awesome.
Any help will be much appreciated ! and
Sorry for my newbiness and bad English explanation but i hope you guys understand me (^-^)/.
There's a way to do it programmatically, although I don't recall how off the cuff.
That said, if you're just wanting to do it for your own personal use, not for a piece of software you'll be distributing to others, then the easiest way is to use Windows Explorer: click the data file you want, then right-click and select Open With -> ... you'll probably need to select the Other... option at the bottom. That will bring up a dialog box that lets you choose your app. There should also be a checkbox somewhere that says something like "Make Default" or "Always Open With This" or something along those lines. Make sure that box is checked. Then click OK a couple of times and you're off to the races.
But you'll also need to set up your app to read the filename from the command line. You use ParamStr and ParamCount for this.
for i := 0 to ParamCount do
ShowMessage('Parameter '+IntToStr(i)+' = '+ParamStr(i));
When you double-click on the data file, it will open your app and pass this filename as ParamStr(1). So when you get it, simply do something like this:
memo1.lines.LoadFromFile( ParamStr(1) );
Use this as a STARTING POINT (it won't compile if you just copy-and-paste!):
procedure TMyForm234:FormCreate( blah blah )
begin
if ParamCount > 0 then
theMemo.Lines.LoadFromFile( ParamStr(1) );
end;
How can I generate a rich text hyperlink on my clipboard using something like autohotkey?
Basically I want to create a paste as hyperlink shortcut. Currently I highlight some text and press ctrl+alt+k which sends ctrl+k (create hyperlink hotkey in many programs), then sends ctrl+v to paste in my location, and finally enter to confirm.
This works well enough but I was hoping to make it general enough to work anywhere that supports rich text, even if it doesn't have a ctrl+k shortcut available.
Thanks,
David
Simple code:
In this example I use Ctrl+Shift+v to paste a hyperlink in your format:
^+v::
Send, ^k %Clipboard% {Enter}
Return
or...
^+v::
StringReplace, ClipBoard, ClipBoard, http:// ; strip http://
StringReplace, ClipBoard, ClipBoard, https:// ; strip http://
Send, %ClipBoard%
Return
I have read multiple posts on the issue, and none seem to come to a decent conclusion to my question. (Perhaps I'm trying to see if anything has popped up lately.)
I have a small charity app that handles pledges. In doing so, it needs to work with and print documents.
Thing is, if Word is open in the background, the app thread will hang and won't respond to the closure of Word, and I have to roll back manually and close word. Sure, that all works fine, but I simply cannot guarantee that the end user will close Word, even if I put the instruction in a user manual.
I'm not too fussed about speed, but I guess that if it can be enhanced, it would be a nice little bonus.
Have any libraries been released for Delphi that will allow me to open, edit, print, and save documents? If not, is there a way to use Word Automation in such a way that it will not conflict with another open handle of Word when opened?
If you use GetActiveOleObject, you will get the running instance of Word.
By using CreateOleObject, you will get a new instance and shouldn't be troubled by other running instances.
In case you use the TWordApplication, wrapper you can set ConnectKind to ckNewInstance to accomplish this. By default, TWordApplication will try to connect with a running instance.
If you want to open edit and print Word documents and you don't mind using RTF format for what you're doing, investigate TRichView.
It will generate rich documents that are in RTF format, which is one of the formats MS word supports. I don't think it directly reads .DOC files but you can convert .DOC and .DOCX into RTF, for most simple files, but certain advanced formatting features would be lost in the conversion.
It has the advantage of working without any need for even any copy of MS Word to be installed on the machine that is going to do the document processing. For production of receipts and other simple documents, this would be the most reliable technique; Don't use Word directly, at all.
procedure PrintViaWord (const filename: string);
const
wdUserTemplatesPath = 2;
var
wrdApp, wrdDoc, wrdSel: variant;
begin
wrdApp:= CreateOleObject ('Word.Application'); // create new instance
sleep (5000); // this fixes a bug in Word 2010 to do with opening templates
wrdDoc:= wrdApp.documents.add (
wrdApp.Options.DefaultFilePath[wdUserTemplatesPath] + '\mytemplate.dot');
wrdDoc.Select;
wrdSel:= wrdApp.selection;
wrdApp.Options.CheckSpellingAsYouType:= 0;
wrdSel.paragraphformat.alignment:= 1;
wrdSel.typetext ('This is a program demonstrating how to open Word in the background'
+ ' and add some text, print it, save it and exit Word');
wrdDoc.SaveAs (filename + '.doc');
wrdApp.ActivePrinter:= 'Konica Minolta 211';
wrdApp.PrintOut;
WrdDoc.SaveAs (filename + '.doc');
wrdApp.quit;
wrdSel:= unassigned;
wrdDoc:= unassigned;
wrdApp:= unassigned
end;