I am trying to debug using NetBeans 11 as my client, Xdebug 3 on the Docker image. The Docker container is on a remote host. I am unable to make a connection. Indicator at the bottom of the NetBeans screen scrolls forever with "waiting for connection (netbeans-xdebug)". I am not sure what I am doing wrong. I have had this work in the past without Docker and with Xdebug 2, I am not sure if I messed up the Xdebug 3, the Docker or both.
My configurations:
Dockerfile adds Xdebug properly and I can see it in my container.
docker-compose.yml
---
services:
drupal:
container_name: intranet-finkenb2
ports:
- "8082:80"
- "9092:9003"
volumes:
- /home/finkenb2/intranet/custom_themes:/opt/drupal/web/themes/custom
- /home/finkenb2/intranet/custom_modules:/opt/drupal/web/modules/custom
environment:
XDEBUG_MODE: debug,develop
XDEBUG_SESSION: netbeans-xdebug
XDEBUG_CONFIG: >
client_host = localhost
client_port = 9003
discover_client_host=true
start_with_request=yes
db:
container_name: intranet-finkenb2-db
solr:
container_name: intranet-finkenb2-solr
ports:
- "8982:8983"
volumes:
public_files:
private_files:
site_settings:
SSH Tunnel via PuTTY: R9092 localhost:9092
NetBeans PHP Debug config:
- Debugger Port: 9092
- Session ID: netbeans-xdebug
- Maximum Data Length: 8192
- Check: Stop at first line
NetBeans Project config (run configuration):
- Run As: Remote Web Site
- Project URL: http://intranet-finkenb2.devel.lib.msu.edu
- index file: index.php
- remote connection
- hostname intranet8.devel.lib.msu.edu /*docker host server*/
- user/pwd correct
- initial directory /var/www/
This is not correct:
ports
- "9092:9003"
Xdebug connects to your IDE, so you don't need to expose the port. These ports are for external exposures anyway, and you're SSH-ing into the container with -R already, so this makes no sense.
This is not correct:
XDEBUG_CONFIG: >
client_host = localhost
client_port = 9003
discover_client_host=true
start_with_request=yes
You can't use all of these as part of the XDEBUG_CONFIG variable, start_with_request, for example.
discover_client_host with Docker doesn't work, as it gets the wrong IP through the gateway
localhost is normally also not correct, as it needs to be the IP/hostname of the machine where your IDE listens. But you're SSH-ing into that container, so that should fine fine.
With that SSH tunnel, you need to set client_port to the port of your remote SSH end point (9092).
If anything else is unclear, make a log file, or try to debug a page with xdebug_info() in it, and it will tell you what Xdebug has tried.
Related
After spending hours searching why I cannot access to my webUI, I turn to you.
I setup freeipa on docker using docker-compose. I opened some port to gain remote access using host-ip:port on my own computer. Freeipa is supposed to be run on my server (lets say 192.168.1.2) and the webui accessible with any other local computer on port 80 / 443 (192.168.1.4:80 or 192.168.1.4:443)
When I run my .yaml file, freeipa get setup with a "the ipa-server-install command was successful" message.
I thought it could come from my tight iptables rules and tried to put all policies to ACCEPT to debug. It didn't do it.
I'm a bit lost to how I could debbug this or find how to fix it.
OS : ubuntu 20.04.3
Docker version: 20.10.12, build e91ed57
freeipa image: freeipa/freeipa:centos-8-stream
Docker-compose version: 1.29.2, build 5becea4c
My .yaml file:
version: "3.8"
services:
freeipa:
image: freeipa/freeipa-server:centos-8-stream
hostname: sanctuary
domainname: serv.sanctuary.local
container_name: freeipa-dev
ports:
- 80:80
- 443:443
- 389:389
- 636:636
- 88:88
- 464:464
- 88:88/udp
- 464:464/udp
- 123:123/udp
dns:
- 10.64.0.1
- 1.1.1.1
- 1.0.0.1
restart: unless-stopped
tty: true
stdin_open: true
environment:
IPA_SERVER_HOSTNAME: serv.sanctuary.local
IPA_SERVER_IP: 192.168.1.100
TZ: "Europe/Paris"
command:
- -U
- --domain=sanctuary.local
- --realm=sanctuary.local
- --admin-password=pass
- --http-pin=pass
- --dirsrv-pin=pass
- --ds-password=pass
- --no-dnssec-validation
- --no-host-dns
- --setup-dns
- --auto-forwarders
- --allow-zone-overlap
- --unattended
cap_add:
- SYS_TIME
- NET_ADMIN
restart: unless-stopped
volumes:
- /etc/localtime:/etc/localtime:ro
- /sys/fs/cgroup:/sys/fs/cgroup:ro
- ./data:/data
- ./logs:/var/logs
sysctls:
- net.ipv6.conf.all.disable_ipv6=0
- net.ipv6.conf.lo.disable_ipv6=0
security_opt:
- "seccomp:unconfined"
labels:
- dev
I tried to tinker with the deployment file (add or remove conf found on internet such as add/remove IPA_SERVER_IP, add/remove an external bridge network)
Thank you very much for any help =)
Alright, for those who might have the same problem, I will explain everything I did to debug this.
I extensively relieded on the answers found here : https://floblanc.wordpress.com/2017/09/11/troubleshooting-freeipa-pki-tomcatd-fails-to-start/
First, I checked the status of each services with ipactl status. Depending of the problem, you might have different output but mine was like this :
Directory Service: RUNNING
krb5kdc Service: RUNNING
kadmin Service: RUNNING
named Service: RUNNING
httpd Service: RUNNING
ipa-custodia Service: RUNNING
pki-tomcatd Service: STOPPED
ipa-otpd Service: RUNNING
ipa-dnskeysyncd Service: RUNNING
ipa: INFO: The ipactl command was successful
I therefore checked the logs for tomcat /var/log/pki/pki-tomcat/ca/debug-xxxx. I realised I had connection refused with something related to the certificates.
Here, I first checked that my certificate was present in /etc/pki/pki-tomcat/alias using sudo certutil -L -d /etc/pki/pki-tomcat/alias -n 'subsystemCert cert-pki-ca'.
## output :
Certificate:
Data:
Version: 3 (0x2)
Serial Number: 4 (0x4)
...
...
Then I made sure that the private key can be read using the password found in /var/lib/pki/pki-tomcat/conf/password.conf (with the tag internal=…)
grep internal /var/lib/pki/pki-tomcat/conf/password.conf | cut -d= -f2 > /tmp/pwdfile.txt
certutil -K -d /etc/pki/pki-tomcat/alias -f /tmp/pwdfile.txt -n 'subsystemCert cert-pki-ca'
I still had nothings strange so I assumed that at this point :
pki-tomcat is able to access the certificate and the private key
The issue is likely to be on the LDAP server side
I tried to read the user entry in the LDAP to compare it to the certificate using ldapsearch -LLL -D 'cn=directory manager' -W -b uid=pkidbuser,ou=people,o=ipaca userCertificate description seeAlso but had an error after entering the password. Because my certs were OK and LDAP service running, I assumed something was off with the certificates date.
Indeed, during the install freeipa setup the certs using your current system date as base. But it also install chrony for server time synchronization. After reboot, my chrony conf were wrong and set my host date 2 years ahead.
I couldnt figure out the problem with the chrony conf so I stopped the service and set the date manually using timedatectl set-time "yyyy-mm-dd hh:mm:ss".
I restarted freeipa services amd my pki-tomcat service was working again.
After that, I set the freeipa IP in my router as DNS. I restarted services and computer in the local network so DNS config were refreshed. After that, the webUI was accessible !
I'm trying to deploy a Docker Swarm of three host nodes with a single replicated service and put an HAProxy in front of it. I want the clients to be able to connect via SSL.
My docker-compose.yml:
version: '3.9'
services:
proxy:
image: haproxy
ports:
- 443:8080
volumes:
- haproxy.cfg:/usr/local/etc/haproxy/haproxy.cfg
deploy:
placement:
constraints: [node.role == manager]
networks:
- servers-network
node-server:
image: glusk/hackathon-2021:latest
ports:
- 8080:8080
command: npm run server
deploy:
mode: replicated
replicas: 2
networks:
- servers-network
networks:
servers-network:
driver: overlay
My haproxy.cfg (based on the official example):
# Simple configuration for an HTTP proxy listening on port 80 on all
# interfaces and forwarding requests to a single backend "servers" with a
# single server "server1" listening on 127.0.0.1:8000
global
daemon
maxconn 256
defaults
mode http
timeout connect 5000ms
timeout client 50000ms
timeout server 50000ms
frontend http-in
bind *:80
default_backend servers
backend servers
server server1 127.0.0.1:8000 maxconn 32
My hosts are Lightsail VPS Ubuntu instances and share the same private network.
node-service runs each https server task inside its own container on: 0.0.0.0:8080.
The way I'm trying to make this work at the moment is to ssh into the manager node (which also has a static and public IP), copy over my configuration files from above, and run:
docker stack deploy --compose-file=docker-compose.yml hackathon-2021
but it doesn't work.
Well, first of all and regarding SSL (since it's the first thing that you mention) you need to configure it using the certificate and listen on the port 443, not port 80.
With that modification, your Proxy configuration would already change to:
global
daemon
maxconn 256
defaults
mode http
timeout connect 5000ms
timeout client 50000ms
timeout server 50000ms
frontend http-in
bind *:80
default_backend servers
frontend https-in
bind *:443 ssl crt /etc/ssl/certs/hackaton2021.pem
default_backend servers
That would be a really simplified configuration for allowing SSL connection.
Now, let's go for the access to the different services.
First of all, you cannot access to the service on localhost, actually you shouldn't even expose the ports of the services you have to the host. The reason? That you already have those applications in the same network than the haproxy, so the ideal would be to take advantage of the Docker DNS to access directly to them
In order to do this, first we need to be able to resolve the service names. For that you need to add the following section to your configuration:
resolvers docker
nameserver dns1 127.0.0.11:53
resolve_retries 3
timeout resolve 1s
timeout retry 1s
hold other 10s
hold refused 10s
hold nx 10s
hold timeout 10s
hold valid 10s
hold obsolete 10s
The Docker Swarm DNS service is always available at 127.0.0.11.
Now to your previous existent configuration, we would have to add the server but using the service-name discovery:
backend servers
balance roundrobin
server-template node- 2 node-server:8080 check resolvers docker init-addr libc,none
If you check what we are doing, we are creating a server for each one of the discovered containers in the Swarm within the node-server service (so the replicas) and we will create those adding the prefix node- to each one of them.
Basically, that would be the equivalent to get the actual IPs of each of the replicas and add them stacked as a basic server configuration.
For deployment, you also have some errors, since we aren't interested into actually expose the node-server ports to the host, but to create the two replicas and use HAProxy for the networking.
For that, we should use the following Docker Compose:
version: '3.9'
services:
proxy:
image: haproxy
ports:
- 80:80
- 443:443
volumes:
- hackaton2021.pem:/etc/ssl/certs/hackaton2021.pem
- haproxy.cfg:/usr/local/etc/haproxy/haproxy.cfg
deploy:
placement:
constraints: [node.role == manager]
node-server:
image: glusk/hackathon-2021:latest
command: npm run server
deploy:
mode: replicated
replicas: 2
Remember to copy your haproxy.cfg and the self-signed (or real) certificate for your application to the instance before deploying the Stack.
Also, when you create that stack it will automatically create a network with the name <STACK_NAME>-default, so you don't need to define a network just for connecting both services.
I have been given a site to work with using https://github.com/dunglas/symfony-docker
All looks good, apart from I usually have 3 or 4 sites at one time in development, so I would usually in my docker-compose files set different ports for various services so they don't clash, for example:
nginx:
build: docker/nginx
ports:
- 97:80
However in this I don't seem to be able to change it, I am not sure if it is because of the caddy communication (first time using it, usually use nginx)
I tried setting different ports in the docker-compose.yml such as
caddy:
ports:
# HTTP
- target: 80
published: 97
protocol: tcp
# HTTPS
- target: 443
published: 8083
protocol: tcp
# HTTP/3
- target: 443
published: 8083
protocol: udp
But this just kept giving server 502 errors.
If I turn off all my other Docker containers I can get it working, so I know it is a port issue.
Does anyone familiar with this Docker setup know what I could be doing wrong? Maybe thinking it doesn't like non 443 port for it's self signed security cert? I did notice if I visit http://localhost:97 it redirected me to https://localhost (no port). However if I visit https://localhost:8083 I would get the 502 error
I also needed to use custom port in my project so i modified the caddy env var from:
caddy:
environment:
SERVER_NAME: ${SERVER_NAME:-localhost, caddy:80}
(comes with the repo) to:
caddy:
environment:
SERVER_NAME: ${SERVER_NAME:-http://localhost:80, https://localhost:443}
in the docker-compose file. Also as Blackban suggested you also need to check outer ports conflict and firewall.
Problem
I'm trying to set up JetBrains Hub, Youtrack, Upsource and Teamcity in a docker container and configure each to be available on their own IP (macvlan) at the default ports 80 redirected to 443 and 443 for HTTPS (so the port numbers do not show up in the browser).
However if I do that I get:
Could not listen on address 0.0.0.0 and port 443
Leaving the teamtools on their default ports 8080 and 8443 works or giving them ports over 2000 seems to work as well.
I checked with fuser 443/tcp and netstat -tulpn but there is nothing running on port 80 or 443. (had to install the packages for those in the container)
I tried setting the listening address to the NICs IP or 172.0.0.1 but this is refused as well:
root#teamtools [ /opt/teamtools ]# docker run --rm -it \
-v /opt/hub/data:/opt/hub/data \
-v /opt/hub/conf:/opt/hub/conf \
-v /opt/hub/logs:/opt/hub/logs \
-v /opt/hub/backups:/opt/hub/backups \
jetbrains/hub:2018.2.9840 \
configure --listen-address=192.168.1.211
* Configuring JetBrains Hub 2018.2
* Setting property 'listen-address' to '192.168.1.211' from arguments
[APP-WRAPPER] Failed to configure Hub: java.util.concurrent.ExecutionException: com.jetbrains.bundle.exceptions.BadConfigurationException: Could not listen on address {192.168.1.211} . Please specify another listen address in property listen-address
Question:
Why can I not set ports 80 and 443?
Why does it work for ports over
2000?
How can I make this work without a reverse proxy?
(reverse-proxy comes with a whole bunch of other issues, that I'm trying to avoid with this setup)
Setup
ESXi 6.7 Host
- vSwitch0 (Allow promiscuous mode: Yes)
- port group: VM Netork (Allow promiscuous mode: No)
- other VMs
- port group: Promiscuous Ports (Allow promiscuous mode: Yes)
- Teamtools VM (Photon OS 2.0, IP: 192.168.1.210)
- firewall based on: https://unrouted.io/2017/08/15/docker-firewall/
- docker/docker-compose
- hub (IP: 192.168.1.211:80/443)
- youtrack (IP: 192.168.1.212:80/443)
- upsource (IP: 192.168.1.213:80/443)
- teamcity-server (IP: 192.168.1.214:80/443)
- teamcity_db (MariaDB 10.3) (IP: 192.168.1.215:3306)
docker-compose.yml
version: '2'
networks:
macnet:
driver: macvlan
driver_opts:
parent: eth0
ipam:
config:
- subnet: 192.168.1.0/24
gateway: 192.168.1.1
services:
hub:
# set a custom container name so no more than one container can be created from this config
container_name: hub
image: "jetbrains/hub:2018.2.9840"
restart: unless-stopped
volumes:
- /opt/hub/data:/opt/hub/data
- /opt/hub/conf:/opt/hub/conf
- /opt/hub/logs:/opt/hub/logs
- /opt/hub/backups:/opt/hub/backups
- /opt/teamtools:/opt/teamtools
expose:
- "80"
- "443"
- "8080"
- "8443"
networks:
macnet:
ipv4_address: 192.168.1.211
domainname: office.mydomain.com
hostname: hub
environment:
- "JAVA_OPTS=-J-Djavax.net.ssl.trustStore=/opt/teamtools/certs/keyStore.p12 -J-Djavax.net.ssl.trustStorePassword=xxxxxxxxxxxxxx"
...
Upsource is running by user jetbrans, which is non-root.
https://www.w3.org/Daemon/User/Installation/PrivilegedPorts.html
I'm using Docker 1.11.1 and docker-compose 1.8.0-rc2.
In the good old days (so, last year), you could set up a docker-compose.yml file like this:
app:
image: myapp
frontend:
image: myfrontend
links:
- app
And then start up the environment like this:
docker scale app=3 frontend=1
And your frontend container could inspect the environment variables
for variables named APP_1_PORT, APP_2_PORT, etc to discover the
available backend hosts and configure itself accordingly.
Times have changed. Now, we do this...
version: '2'
services:
app:
image: myapp
frontend:
image: myfrontend
links:
- app
...and instead of environment variables, we get DNS. So inside the
frontend container, I can ask for app_app_1 or app_app_2 or
app_app_3 and get the corresponding ip address. I can also ask for
app and get the address of app_app_1.
But how do I discover all of the available backend containers? I
guess I could loop over getent hosts ... until it fails:
counter=1
while :; do
getent hosts app_$counter || break
backends="$backends app_$counter"
let counter++
done
But that seems ugly and fragile.
I've heard rumors about round-robin dns, but (a) that doesn't seem to
be happening in my test environment, and (b) that doesn't necessarily
help if your frontend needs simultaneous connections to the backends.
How is simple container and service discovery meant to work in the
modern Docker world?
Docker's built-in Nameserver & Loadbalancer
Docker comes with a built-in nameserver. The server is, by default, reachable via 127.0.0.11:53.
Every container has by default a nameserver entry in /etc/resolv.conf, so it is not required to specify the address of the nameserver from within the container. That is why you can find your service from within the network with service or task_service_n.
If you do task_service_n then you will get the address of the corresponding service replica.
If you only ask for the service docker will perform internal load balancing between container in the same network and external load balancing to handle requests from outside.
When swarm is used, docker will additionally use two special networks.
The ingress network, which is actually an overlay network and handles incomming trafic to the swarm. It allows to query any service from any node in the swarm.
The docker_gwbridge, a bridge network, which connects the overlay networks of the individual hosts to an their physical network. (including ingress)
When using swarm to deploy services, the behavior as described in the examples below will not work unless endpointmode is set to dns roundrobin instead of vip.
endpoint_mode: vip - Docker assigns the service a virtual IP (VIP) that acts as the front end for clients to reach the service on a network. Docker routes requests between the client and available worker nodes for the service, without client knowledge of how many nodes are participating in the service or their IP addresses or ports. (This is the default.)
endpoint_mode: dnsrr - DNS round-robin (DNSRR) service discovery does not use a single virtual IP. Docker sets up DNS entries for the service such that a DNS query for the service name returns a list of IP addresses, and the client connects directly to one of these. DNS round-robin is useful in cases where you want to use your own load balancer, or for Hybrid Windows and Linux applications.
Example
For example deploy three replicas from dig/docker-compose.yml
version: '3.8'
services:
whoami:
image: "traefik/whoami"
deploy:
replicas: 3
DNS Lookup
You can use tools such as dig or nslookup to do a DNS lookup against the nameserver in the same network.
docker run --rm --network dig_default tutum/dnsutils dig whoami
; <<>> DiG 9.9.5-3ubuntu0.2-Ubuntu <<>> whoami
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 58433
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;whoami. IN A
;; ANSWER SECTION:
whoami. 600 IN A 172.28.0.3
whoami. 600 IN A 172.28.0.2
whoami. 600 IN A 172.28.0.4
;; Query time: 0 msec
;; SERVER: 127.0.0.11#53(127.0.0.11)
;; WHEN: Mon Nov 16 22:36:37 UTC 2020
;; MSG SIZE rcvd: 90
If you are only interested in the IP, you can provide the +short option
docker run --rm --network dig_default tutum/dnsutils dig +short whoami
172.28.0.3
172.28.0.4
172.28.0.2
Or look for specific service
docker run --rm --network dig_default tutum/dnsutils dig +short dig_whoami_2
172.28.0.4
Load balancing
The default loadbalancing happens on the transport layer or layer 4 of the OSI Model. So it is TCP/UDP based. That means it is not possible to inpsect and manipulate http headers with this method. In the enterprise edition it is apparently possible to use labels similar to the ones treafik is using in the example a bit further down.
docker run --rm --network dig_default curlimages/curl -Ls http://whoami
Hostname: eedc94d45bf4
IP: 127.0.0.1
IP: 172.28.0.3
RemoteAddr: 172.28.0.5:43910
GET / HTTP/1.1
Host: whoami
User-Agent: curl/7.73.0-DEV
Accept: */*
Here is the hostname from 10 times curl:
Hostname: eedc94d45bf4
Hostname: 42312c03a825
Hostname: 42312c03a825
Hostname: 42312c03a825
Hostname: eedc94d45bf4
Hostname: d922d86eccc6
Hostname: d922d86eccc6
Hostname: eedc94d45bf4
Hostname: 42312c03a825
Hostname: d922d86eccc6
Health Checks
Health checks, by default, are done by checking the process id (PID) of the container on the host kernel. If the process is running successfully, the container is considered healthy.
Oftentimes other health checks are required. The container may be running but the application inside has crashed. In many cases a TCP or HTTP check is preferred.
It is possible to bake a custom health checks into images. For example, using curl to perform L7 health checks.
FROM traefik/whoami
HEALTHCHECK CMD curl --fail http://localhost || exit 1
It is also possible to specify the health check via cli when starting the container.
docker run \
--health-cmd "curl --fail http://localhost || exit 1" \
--health-interval=5s \
--timeout=3s \
traefik/whoami
Example with Swarm
As initially mentioned, swarms behavior is different in that it will assign a virtual IP to services by default. Its actually not different its just docker or docker-compose doesn't create real services, it just imitates the behavior of swarm but still runs the container normally, as services can, in fact, only be created by manager nodes.
Keeping in mind we are on a swarm manager and thus the default mode is VIP
Create a overlay network that can be used by regular containers too
$ docker network create --driver overlay --attachable testnet
create some service with 2 replicas
$ docker service create --network testnet --replicas 2 --name digme nginx
Now lets use dig again and making sure we attach the container to the same network
$ docker run --network testnet --rm tutum/dnsutils dig digme
digme. 600 IN A 10.0.18.6
We see that indeed we only got one IP address back, so it appears that this is the virtual IP that has been assigned by docker.
Swarm allows actually to get the single IPs in this case without explicitly setting the endpoint mode.
We can query for tasks.<servicename> in this case that is tasks.digme
$ docker run --network testnet --rm tutum/dnsutils dig tasks.digme
tasks.digme. 600 IN A 10.0.18.7
tasks.digme. 600 IN A 10.0.18.8
This has brought us 2 A records pointing to the individual replicas.
Now lets create another service with endpointmode set to dns roundrobin
docker service create --endpoint-mode dnsrr --network testnet --replicas 2 --name digme2 nginx
$ docker run --network testnet --rm tutum/dnsutils dig digme2
digme2. 600 IN A 10.0.18.21
digme2. 600 IN A 10.0.18.20
This way we get both IPs without adding the prefix tasks.
Service Discovery & Loadbalancing Strategies
If the built in features are not sufficent, some strategies can be implemented to achieve better control. Below are some examples.
HAProxy
Haproxy can use the docker nameserver in combination with dynamic server templates to discover the running container. Then the traditional proxy features can be leveraged to achieve powerful layer 7 load balancing with http header manipulation and chaos engeering such as retries.
version: '3.8'
services:
loadbalancer:
image: haproxy
volumes:
- ./haproxy.cfg:/usr/local/etc/haproxy/haproxy.cfg:ro
ports:
- 80:80
- 443:443
whoami:
image: "traefik/whoami"
deploy:
replicas: 3
...
resolvers docker
nameserver dns1 127.0.0.11:53
resolve_retries 3
timeout resolve 1s
timeout retry 1s
hold other 10s
hold refused 10s
hold nx 10s
hold timeout 10s
hold valid 10s
hold obsolete 10s
...
backend whoami
balance leastconn
option httpchk
option redispatch 1
retry-on all-retryable-errors
retries 2
http-request disable-l7-retry if METH_POST
dynamic-cookie-key MY_SERVICES_HASHED_ADDRESS
cookie MY_SERVICES_HASHED_ADDRESS insert dynamic
server-template whoami- 6 whoami:80 check resolvers docker init-addr libc,none
...
Traefik
The previous method is already pretty decent. However, you may have noticed that it requires knowing which services should be discovered and also the number of replicas to discover is hard coded. Traefik, a container native edge router, solves both problems. As long as we enable Traefik via label, the service will be discovered. This decentralized the configuration. It is as if each service registers itself.
The label can also be used to inspect and manipulate http headers.
version: "3.8"
services:
traefik:
image: "traefik:v2.3"
command:
- "--log.level=DEBUG"
- "--api.insecure=true"
- "--providers.docker=true"
- "--providers.docker.exposedbydefault=false"
- "--entrypoints.web.address=:80"
ports:
- "80:80"
- "8080:8080"
volumes:
- "/var/run/docker.sock:/var/run/docker.sock:ro"
whoami:
image: "traefik/whoami"
labels:
- "traefik.enable=true"
- "traefik.port=80"
- "traefik.http.routers.whoami.entrypoints=web"
- "traefik.http.routers.whoami.rule=PathPrefix(`/`)"
- "traefik.http.services.whoami.loadbalancer.sticky=true"
- "traefik.http.services.whoami.loadbalancer.sticky.cookie.name=MY_SERVICE_ADDRESS"
deploy:
replicas: 3
Consul
Consul is a tool for service discovery and configuration management. Services have to be registered via API request. It is a more complex solution that probably only makes sense in bigger clusters, but can be very powerful. Usually it recommended running this on bare metal and not in a container. You could install it alongside the docker host on each server in your cluster.
In this example it has been paired with the registrator image, which takes care of registering the docker services in consuls catalog.
The catalog can be leveraged in many ways. One of them is to use consul-template.
Note that consul comes with its own DNS resolver so in this instance the docker DNS resolver is somewhat neglected.
version: '3.8'
services:
consul:
image: gliderlabs/consul-server:latest
command: "-advertise=${MYHOST} -server -bootstrap"
container_name: consul
hostname: ${MYHOST}
ports:
- 8500:8500
registrator:
image: gliderlabs/registrator:latest
command: "-ip ${MYHOST} consul://${MYHOST}:8500"
container_name: registrator
hostname: ${MYHOST}
depends_on:
- consul
volumes:
- /var/run/docker.sock:/tmp/docker.sock
proxy:
build: .
ports:
- 80:80
depends_on:
- consul
whoami:
image: "traefik/whoami"
deploy:
replicas: 3
ports:
- "80"
Dockerfile for custom proxy image with consul template backed in.
FROM nginx
RUN curl https://releases.hashicorp.com/consul-template/0.25.1/consul-template_0.25.1_linux_amd64.tgz \
> consul-template_0.25.1_linux_amd64.tgz
RUN gunzip -c consul-template_0.25.1_linux_amd64.tgz | tar xvf -
RUN mv consul-template /usr/sbin/consul-template
RUN rm /etc/nginx/conf.d/default.conf
ADD proxy.conf.ctmpl /etc/nginx/conf.d/
ADD consul-template.hcl /
CMD [ "/bin/bash", "-c", "/etc/init.d/nginx start && consul-template -config=consul-template.hcl" ]
Consul template takes a template file and renders it according to the content of consuls catalog.
upstream whoami {
{{ range service "whoami" }}
server {{ .Address }}:{{ .Port }};
{{ end }}
}
server {
listen 80;
location / {
proxy_pass http://whoami;
}
}
After the template has been changed, the restart command is executed.
consul {
address = "consul:8500"
retry {
enabled = true
attempts = 12
backoff = "250ms"
}
}
template {
source = "/etc/nginx/conf.d/proxy.conf.ctmpl"
destination = "/etc/nginx/conf.d/proxy.conf"
perms = 0600
command = "/etc/init.d/nginx reload"
command_timeout = "60s"
}
Feature Table
Built In
HAProxy
Traefik
Consul-Template
Resolver
Docker
Docker
Docker
Consul
Service Discovery
Automatic
Server Templates
Label System
KV Store + Template
Health Checks
Yes
Yes
Yes
Yes
Load Balancing
L4
L4, L7
L4, L7
L4, L7
Sticky Session
No
Yes
Yes
Depends on proxy
Metrics
No
Stats Page
Dashboard
Dashboard
You can view some of the code samples in more detail on github.