I want to enter a matrix into a single cell (lots of variable => tedious to enter one entry/cell) i chose the format x_1, y_1; x_2, y_2; ... and would like to split this up so I can access them easily for various functions. My first idea was to firstly split them up with the ; delimiter to get a row of x_i, y_i cells and then split that row into two rows, one with x_i and one with y_i. The first part worked out but I'm having trouble doing the second part effectively.
first formula: (in 'split 1' sheet)
=split(data!F2; ";")
second formula:
=transpose(split(filter('split 1'!B1:Z1; len('split 1'!B1:Z1)); "," ) )
The second formula only works for the first cell but doesnt give me anything else, i tried adding arrayformula() to it but it still doesnt work, what am I doing wrong? (I know I could just apply the function to a single cell and then copy it to the other cells but that seems like a very bad solution that easily breaks)
Also, I currently store the rows in separate sheets, I don't really need the data I just want to put them into a few functions. Is there a way to do this in a single cell so I just can write =function(expression for the split)?
#EDIT
Im trying to make a recipe calculator (like myfitnesspal) using sheets, heres a link to an editable copy of it: https://docs.google.com/spreadsheets/d/13hKVbnot6PSangmooprs7vMwrP5Txj5_ddMc9Xgowvs/edit?usp=sharing
Try this:
=ARRAYFORMULA(TRIM(SPLIT(TRANSPOSE(SPLIT(G2; ";")); ",")))
Related
I'm trying to work on a Google Sheet and make it as user friendly as possible, so when I'm not around others can't screw it up. I have previously copied the formula down the column, but I'm trying to do it in an array formula, that is in the header of the column so people don't need to copy the formula to other cells.
The formula is simply a VLOOKUP, comparing a cell to the left with the code, and retrieving the title and other information later. (I've had this working happily via copying the formula down the column.)
VLOOKUP($F$2:F, 'Lessons NEW'!$E$2:$F,2,false)
My problem comes when trying to do this using an array formula in the header. This also works properly, but doesn't allow me to do somethings needed.
={"Title";
ARRAYFORMULA(
IF($F2:$F<>"",
VLOOKUP($F$2:F, 'Lessons NEW'!$E$2:$F,2,false),
)
)}
Again this works happily.
HOWEVER. my issue is that on some rows I need to manually enter some info.
What I want to happen, is rows in the column that have data, in the array formula's destination to get skipped over and simply ignored during the array formula's output and end up containing what's been manually entered in them. (Some rows in the column will just be random manual entry stuff)
I've tried doing this via checking if there is a code in the cell to the left, and try to make it skip if so, or check if the destination cell has contents already and skip if so. but it seems that if I have anything in the output area of the array formula, it breaks it completely.
Does anyone have any suggestions of how I can accomplish this? Thanks!
Unfortunately there's no direct solution within ARRAYFORMULA. If you can, and ideally there are no in between rows added, you can add a column to the left to be hidden, and contain the formula adapted:
={"",VLOOKUP($F2, 'Lessons NEW'!$E$2:$F,2,false)}
Without ARRAYFORMULA it will be able to expand at any row that doesn't have a handwritten value. You may also protect that whole hidden column (that will mean also that no in between rows will be added by noon authorised people, may be also useful for you)
UPDATE
Sample script for copying the formula. Adapt the ranges and name of the sheet:
function onOpen() {
var ss = SpreadsheetApp.getActiveSpreadsheet()
SpreadsheetApp.getUi().createMenu("Custom")
.addItem("Copy Formula","copyformula")
.addToUi()
copyformula()
}
function copyformula(){
var ss = SpreadsheetApp.getActiveSpreadsheet()
var sh = ss.getSheetByName("Sheet3")
var range = sh.getRange("D1")
range.copyTo(sh.getRange("D2:D"))
}
what you describe contradicts the intended usage of arrayformula. arrayformula is designed to roll out and for that, it needs an empty space. any manual input in that empty space will render the arrayformula out of the game. there are only two solutions for your issue:
not use arrayformula but VLOOKUP formula in every cell
use a script that will inject the formula only if there is no manual input
and one more hybrid solution - have your arrayformula in one column and your manual input in the next column, and then have 3rd column that will gather the data like if manual column is empty output vlookup otherwise output manual input
I am having issues with syncing some data from an outside spreadsheet to a master spreadsheet. The problem lies in the fact that there are multiple strings in each cell of the column I wish to sync. I have tried to solve the problem by using IMPORTRANGE to get the data from the I column (starting at I2 onwards), then splitting the strings and finally transposing them to get them into rows, which works well for the master sheet. I have written it like so:
={TRANSPOSE(SPLIT(IMPORTRANGE("spreadsheet_url","sheet_name!I2:I"),","))}
The problem is in the fact that this formula only works for the first cell (I2), despite the fact that I have specified the entire I column. It gets the correct range of data, but when I use SPLIT on it, it only takes the first one into account.
What am I missing? Is there a way to include a new row as a delimiter also in the SPLIT function and in which way?
Thanks a lot.
try:
=ARRAYFORMULA({TRANSPOSE(SPLIT(IMPORTRANGE("spreadsheet_url","sheet_name!I2:I"),","))})
My problem is probably trivial ... However, I was looking for similar problems and their solutions either do not work for me or I can not apply them.
I have 2 sheets - SheetA and SheetB. They are identical. I want to select every cell in SheetA that is no longer identical to Sheet B.
I was able to use (found here on Stack Overflow) such a function in conditional formatting:
= A1 <> INDIRECT ("SheetB! A" & ROW ())
It works if the range is column A. I know that I can apply this function to each column separately, but there is certainly a way that I can apply the same formula to the whole worksheet.
Will there be anyone who can show me the correct formula?
Edit: I tried to use above formula to every column... And my file become to work very slow... So whoever wants to do the same... think again.
After some tries I decided to move everything from SheetB to SheetA. I paste it a 1000 rows under data of Sheet A. Works fine without "indirect" function. No slow downs. It is not a perfect solution but it works.
But even after my problem is solved different way, I would like to know what is the correct formula for my problem... it might be useful for the future with smaller amount of data.
Solved ;)
You should be able to use the Address function to get the address of the current cell from its row and column:
=A1<>indirect("sheetB!"&address(row(),column()))
or for case-sensitive match:
=not(exact(A1,indirect("sheetB!"&address(row(),column()))))
I have a data set of contact details where the emails and their names are scattered in rows, I would like to list them in 2 nice columns. I've tried using "paste special" and use this code below, but none of them worked.
This is how it looks like:
I've tried this code, but it only applies to one row, whereas I want to apply it to all rows and columns.
=transpose(A2:R2)
and
=transpose (A2:R300)
Both don't work. I hope somebody can help me with this, I'd really appreciate it. Thanks in advance!
It looks that you are using the wrong terms so you are using the wrong functions.
Apparently you have a cell with data separated by spaces and break lines and you want to have each email and name on it's own cell, having emails on one column and names on the next column.
One way to achieve that, first replace the separating spaces by using a character like | and the break lines by another different character like $.
Note: Some people use Unicode characters that are very unlikely to appear like ♦, ❤.
To do the above for break lines you could use FIND and REPLACE (Ctrl + H) or function formulas like REGEXREPLACE, SUBSTITUTE, and maybe others. As there are spaces used both as word separators and values separators, FIND and REPLACE can't be used easily. For a single cell, maybe the easier way is to insert the name/email separator manually.
Then separate the cell data. To do this you could use a formula function like SPLIT or Data > Separate values into columns.
Another way is by using Google Apps Script and JavaScript string handling methods but basically the algorithm is the same.
Related
How to split this complex string into 3 columns and 50 rows using Google sheet script
Google Apps Script: Create new rows for cells that contain commas
Google Sheets: string to columns and rows
SOLVED EDIT
Thank you for the help. Solution here.
ORIGINAL POST
I have made a google sheet to describe the issue I am facing linked here (https://docs.google.com/spreadsheets/d/1yK6ZAX8BFnEqiuQO9HIxuY0l62ewDDccj-8EN1r2i2w/edit?usp=sharing).
I will also describe in words, below, the problem I am facing, along with the solutions I have tried.
The data of column A are random single-digit (0-9). I would like column B to show the most recent even number from column A, but only up to a specific row. That specific row is the row corresponding to the row of the cell in column B. In other words, in cell B7, I want to find the most recently entered even number of column A, specifically only on the range A2:A7 (A1 contains a column header).
This is actually a pretty simple formula, and I can get the desired outputs by simply checking if the value in a cell in column A is even and then returning the value of that cell if it is, or the output of the cell above if it isn't. So the formula would look something like: =IF(ISEVEN(A7),A7,B6)
However, my problem is that the length of the data in column A will be growing as more data are entered, and my current solution of using the fill handle to copy the formula to new cells is inelegant and time-consuming. So my desired solution is to use an array formula entered into the first cell of column B (B2), capable of returning the same value as the other formula. The formula I tried to enter to perform this was the following: =ARRAYFORMULA(IF(ISEVEN(A2:A),A2:A,INDIRECT(ADDRESS(ROW(A2:A)-1,2))))
However, as some of my previous work with arrays has taught me, not all formulas iterate as expected down the array. The formula seems to be able to return the correct output on lines which are already even, but it is unable to return the expected most-recently entered even number for all the other lines. It appears that the formula is not able to appropriately interpret the value_if_false argument of the IF formula.
I'm a little new to scripting, so I'm still trying to learn, but I also tried to dabble around with custom functions to no avail. I'm still wet behind the ears when it comes to coding, which is why I've been so lenient on the built-in formulas of Google Sheets, but I fear I may have reached the limit of what Sheets formulas can do.
I am open to trying new approaches, but my only real constraint is that I would really like for this to be a one-touch (or even better no-touch) solution, hope that's not too far beyond the scope of this issue. Any assistance would be much appreciated.
EDIT
After rubber-ducking the problem here, I went back and tried to use the OFFSET formula, hoping I could get it to play nicely with the array formula. Alas, I was unable, but I thought I should at least post my progress here for reference.
Attempt with offset
Still working at it!
Doing a vlookup on the row number seems to work for me
=ArrayFormula(if(A2:A="","",vlookup(row(A2:A),{if(iseven(A2:A),row(A2:A)),A2:A},2)))
Note: if there are no even numbers in range for some rows, it will produce #N/A for those rows.