Can I get an image that have orientation 2? - image-processing

I need to test image orientation 2 photo in my website. But I don't get any orientation as 2 (mirror).

If I understand your problem, you juste need to add a little bit of css, just as shown in W3School :
https://www.w3schools.com/howto/howto_css_flip_image.asp

Related

Using PDFs for icon images in Xcode 7.2

I'm attempting to use PDF files as icons in an app I'm working on. The issue I'm encountering is I'm getting inconsistent tint colors.
If I set a button image from interface builder, the icon image shows up black at runtime. Every time. Regardless of what I attempt to set from interface builder.
I tried setting my button icon image via code and instead of showing up black, it's white:
let myGraphicFile = UIImage(named: "myPDFImage")
let myButtonImage = myGraphicFile?.imageWithRenderingMode(UIImageRenderingMode.AlwaysTemplate)
myButton.setImage(myButtonImage, forState: .Normal)
From code, regardless of what I attempt to set the tint to, it's always white from code.
I discovered this post relating to Xcode 6.x, but I think it might be dated, as I'm able to partially do it, but I can't set the tint.
Use PDF in XCode for an AppIcon (.appiconset collection)
I create the icons in Inkscape, save as PDF 1.5. I add the file to Images.xcassets. In Images.xcassets' attributes inspector, I'm setting:
Devices to Universal
Scale factor to Single Vector.
Summary: I can get it to show up and scale properly, but it's either black from interface builder or white from code. I suspect I'm missing something re: how to save the file from Inkscape.
Thank you for reading. If you have any suggestions, I welcome them.
I have figured out how to create vector icons with Inkscape. When you use PDFs to display icons in iOS, you need to alter the Attributes Inspector for your icon in xcAssets as follows:
1) Drag the PDF into xcAssets
2) Set devices (I did Universal and it worked fine)
3) If your PDF icon is under 1x, 2x, or 3x size class, drag it to Universal and delete the rest of them.
4) Set Scale Factors to Single Vector.
5) Render as Template Image.
Once it's configured there, then you just treat it was you would any other image in interface builder. It's essentially the same thing I was doing in code, but I don't think it gets done in code...it's gotta be done on xcAssets where the image lives. It's my understanding iOS renders vector images for the size class at run time. I think by attempting to tweak it in code wasn't working because the image had already been rendered.
If anyone has any questions on this, I found this link helpful in resolving my issue.
Additionally, this post covers the topic, too. https://stackoverflow.com/a/25804358/4475605

why storyboard ui elements not showing on UIViewController in xcode 6?

I am new to IOS development. I am developing an app for IOS 8 devices. I used storyboard for my design yesterday my storyboard showing all UI design but today morning it show blank UIViewController no UI element vision please see in screen shot and very strange thing is that when i run my app all ui element visible in my device. I google but dont find any solution please help me out. Thank you in advance.
It looks to me like you are using size class and you went into a particular size class and added these views. Now you are back in Any size class, so the views are not there (that is why they are greyed out in the document outline at the left). They are available only for that particular size class. If you switch back to it again, whatever it was, you will see them again. Basically, you have created conditional views - the condition being that they are present only when that particular size class situation is the case.
In other words, if you want your layout to apply in the general case, you want to start by creating and editing it under Any size classes. Only then do you switch to a particular size class and modify the layout for that particular size class.
when i run my app all ui element visible in my device
Yes, because on your device the particular size class situation matches the size class you were editing when you added those views. So there they are. That seems to me to prove my guess is right.
I have the same issue while copy a ViewController to another storyboard.
Fixed by following steps:
1: Select the viewController
2: Click on 5th Tab
3: Set the simulated size to Fixed.
Select install:
Since all components [like label,textfield,buttons] are in disable mode, one select Installed check mark its will be enable again adjust constrain accordingly.
The size must be the same, in all xcode storyboard
In my case, it was due to me setting alpha to 0.0 and forgetting it.

Adding "stretchable" images to and image selected from gallery

Im trying to make an app for planning out where you want to put "shelves" on a wall (sounds strange i know ;) )
i have got it so the image is picked from the UIImagePickerController then loaded in a new ViewController i also have a button at the bottom of the ViewController that i want to open a list of images to select from that once selected the user can move around then stretch the required size if they don't like, delete and once they are happy i want my second button to save the image and put it into an email ready for sending.
I have looked at a few ways but none of them seem to be "adequate" would be so grateful anyone could suggest any ways or even help me with some code, I'm very new to this and this is my first app.
Im not too sure on the code you'd need to see as none of what is written yet is relevant to this part of the app
This is a 2 part so the first is, what way do i go about it?, the second is what code?
Thanks
-(UIImage *)GetStreachableImage
{
UIImage *takephotoButtonImagenormal = [UIImage imageNamed:CHOOSE_TAKE_NORMAL_IMAGE];
UIImage *strechableButtonImageNormal1 = [takephotoButtonImagenormal stretchableImageWithLeftCapWidth:takephotoButtonImagenormal.size.width/2 topCapHeight:takephotoButtonImagenormal.size.height/2];
takephotoButtonImagenormal=nil;
return strechableButtonImageNormal1;
}
try this

Naming Convention For Images in XCode 5

i am using XCode 5 when i am naming the images like that :
fbicon~ipad.png
fbicon~ipad#2x.png
Xib is getting the image
but when i am using this Convention
although tha naming convention is
fbicon~ipad.png
fbicon#2x~ipad.png
xib is not picking the images in that case.
Dont Know Why?
Migrate to use the assets catalogue. You just drag your images into the image wells and interface builder picks them up.
If the catalogue doesn't show the iPad iphone specific wells, open up the properties right side bar and tick the appropriate boxes.
assets catalogue
This is happening since you are using XIB.
When used with XIB, for images to be used on iPhone one must use the convention "image~iphone" and for iPad you have to use "image~ipad". #2x is automatically appended based on which version (retina/non-retina) of the image is needed. That's why the first convention works for you.
In case of getting images from the code, e.g. if you have following versions of the "image"-
image~iphone.png
image~ipad.png
image#2x~iphone.png
image#2x~ipad.png
You just call-
[UIImage imageNamed:#"image"]
In this case, the second convention that you mentioned works- as detailed in the Apple doc-
https://developer.apple.com/library/ios/documentation/Cocoa/Conceptual/LoadingResources/Introduction/Introduction.html
So, nothing really wrong here as I see. For XIBs, the first convention is correct. For using with code, second convention is correct.

Customize UIButton to make compatible to iPhone 5

I am working on my app to customize button accordingly. However once I change my button accordingly, now it has became irresponsive. You could see my code as follows. By the way, this button still works when I run on iPhone 4. It is really strange!
once I change my button position it works, but it wont work the position I want!
float screenSizeHeight=[UIScreen mainScreen].bounds.size.height;
if(screenSizeHeight==568)
[positionButton setFrame:CGRectMake(184,280,77,30)];
if(screenSizeHeight==480)
[positionButton setFrame:CGRectMake(184,240,77,30)];
Hand Bag button is not working!
Check your condition :
if(screenSizeHeight==568)
In both cases you have used screenSizeHeight == 568 so replace one with screenSizeHeight = 480
Hope it helps you.
Check your Default-568h.png image get added or not. If it isn't added , you mainscreen returns bounds as 320x480.
Note : 1) If you rotate device , check your main screen bounds. It may lead to confusion. You can try Better way to use it.
2) This Default-568h.png is only allowed when building an app using Xcode 4.5 and the iOS 6 SDK
3) When you ask a UIScreen for it's Bounds you get the bounds of the screen, which is the whole device screen. (the status bar is part of the screen)

Resources