I am trying to start minikube with comand "minikube start --vm-driver=virtualbox". Befora i install the VirtualBox 6.1.18 for Linux(ubuntu 20.04). but when i run the start command the shell throw a error. can anyone help me with that
thannks a lot!!!
StartHost failed, but will try again: creating host: create: creating: Unable to start the VM: /usr/bin/VBoxManage startvm minikube --type headless failed:
VBoxManage: error: AMD-V is disabled in the BIOS (or by the host OS) (VERR_SVM_DISABLED)
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component ConsoleWrap, interface IConsole
Details: 00:00:00.173843 Power up failed (vrc=VERR_SVM_DISABLED, rc=NS_ERROR_FAILURE (0X80004005))
🔥 Creating virtualbox VM (CPUs=2, Memory=3900MB, Disk=20000MB) ...
😿 Failed to start virtualbox VM. Running "minikube delete" may fix it: creating host: create: creating: Unable to start the VM: /usr/bin/VBoxManage startvm minikube --type headless failed:
VBoxManage: error: AMD-V is disabled in the BIOS (or by the host OS) (VERR_SVM_DISABLED)
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component ConsoleWrap, interface IConsole
Details: 00:00:00.172445 Power up failed (vrc=VERR_SVM_DISABLED, rc=NS_ERROR_FAILURE (0X80004005))
❌ Exiting due to HOST_SVM_DISABLED: Failed to start host: creating host: create: creating: Unable to start the VM: /usr/bin/VBoxManage startvm minikube --type headless failed:
VBoxManage: error: AMD-V is disabled in the BIOS (or by the host OS) (VERR_SVM_DISABLED)
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component ConsoleWrap, interface IConsole
Details: 00:00:00.172445 Power up failed (vrc=VERR_SVM_DISABLED, rc=NS_ERROR_FAILURE (0X80004005))
💡 Suggestion: Your host does not support virtualization. If you are running minikube within a VM, try '--driver=docker'. Otherwise, enable virtualization in your BIOS
🍿 Related issue: https://github.com/kubernetes/minikube/issues/7074
This is usually caused by virtualization been disabled in the bios of your machine and not allowing VirtualBox to start properly . Usually you just need to enter your bios setup and enabling Secure Virtual Machine Mode
For details checkout this post https://appuals.com/fix-amd-v-is-disabled-in-the-bios-verr_svm_disabled/
Usually you just need to enter your bios setup and enabling Secure Virtual Machine Mode
just like you said. I have to enter in the advanced configurations of the motherboard's bios and enable Secure Virtual Machine Mode.
thanks
Run the command in Admin powerShell
minikube delete
Minikube start
Related
As I try to launch it, it stacks at starting state, and nothing happens. Reinstalling and installing prev. versions(4.4, 4.5) don't do the trick it is still stacking on starting...
After diagnose check:
/Applications/Docker.app/Contents/MacOS/com.docker.diagnose check
and here are fails
[FAIL] DD0031: does the Docker API work? Cannot connect to the Docker daemon at unix://docker.raw.sock. Is the docker daemon running?
[FAIL] DD0004: is the Docker engine running? Get "http://ipc/docker": dial unix lifecycle-server.sock: connect: no such file or directory
[FAIL] DD0011: are the LinuxKit services running? failed to ping VM diagnosticsd with error: Get "http://ipc/ping": dial unix diagnosticd.sock: connect: no such file or directory
[FAIL] DD0016: is the LinuxKit VM running? vm is not running: failed to open kmsg.log: open log/vm/kmsg.log: no such file or directory
[FAIL] DD0017: can a VM be started? vm has not started: failed to open kmsg.log: open log/vm/kmsg.log: no such file or directory
[FAIL] DD0003: is the Docker CLI working? exit status 1
[FAIL] DD0012: is the VM networking working? network checks failed: Post "http://ipc/check-network-connectivity": dial unix diagnosticd.sock: connect: no such file or directory
[FAIL] DD0032: do Docker networks overlap with host IPs? Cannot connect to the Docker daemon at unix://docker.raw.sock. Is the docker daemon running?
as a conclusion:
Please investigate the following 1 issue:
1 : The test: can a VM be started?
Failed with: vm has not started: failed to open kmsg.log: open log/vm/kmsg.log: no such file or directory
Reset to a factory defaults seems not taking effect.
Rebooting also useless.
Turns out it was because of turned on VPN on network settings. Answer found here
There are many question around this topic, but not the specific info I am after.
Host OS is Mac, and recently had to uninstall Docker Desktop due to their licensing change. So instead we have moved to minikube, and it is all working great with VirtualBox driver.
But ideally we would like to use the hyperkit driver, as it requires less resources than virtualbox, and is (anecdotally) faster. This also all works great until we connect to our VPN (using cisco anyconnect) and then all outbound networking from within the minikube VM stops working. e.g.
k8> minikube ssh "traceroute 8.8.8.8"
traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 46 byte packets
1 host.minikube.internal (192.168.64.1) 0.154 ms 0.181 ms 0.151 ms
2 * * *
Everything else is is fine, inbound networking via ingress is all good. And maven-docker-plugin is happily creating images with the minikube docker daemon. Just nothing outbound.
So figured I'd try to work with VPNKit as I have read it is meant to address this issue. But cannot find a lot of detailed documentation, and so am struggling.
We have tried starting VPNKit with minimal config:
vpnkit --ethernet /tmp/vpkit-ethernet.socket --debug
And then attempt to start minikube, but it fails:
k8> minikube delete
🔥 Deleting "minikube" in hyperkit ...
💀 Removed all traces of the "minikube" cluster.
k8> minikube start --driver=hyperkit --hyperkit-vpnkit-sock=/tmp/vpnkit-ethernet.socket
😄 minikube v1.25.1 on Darwin 10.15.7
✨ Using the hyperkit driver based on user configuration
👍 Starting control plane node minikube in cluster minikube
🔥 Creating hyperkit VM (CPUs=2, Memory=6000MB, Disk=20000MB) ...
🔥 Deleting "minikube" in hyperkit ...
🤦 StartHost failed, but will try again: creating host: create: Error creating machine: Error in driver during machine creation: hyperkit crashed! command line:
hyperkit loglevel=3 console=ttyS0 console=tty0 noembed nomodeset norestore waitusb=10 systemd.legacy_systemd_cgroup_controller=yes random.trust_cpu=on hw_rng_model=virtio base host=minikube
🔥 Creating hyperkit VM (CPUs=2, Memory=6000MB, Disk=20000MB) ...
😿 Failed to start hyperkit VM. Running "minikube delete" may fix it: creating host: create: Error creating machine: Error in driver during machine creation: hyperkit crashed! command line:
hyperkit loglevel=3 console=ttyS0 console=tty0 noembed nomodeset norestore waitusb=10 systemd.legacy_systemd_cgroup_controller=yes random.trust_cpu=on hw_rng_model=virtio base host=minikube
❌ Exiting due to PR_HYPERKIT_CRASHED: Failed to start host: creating host: create: Error creating machine: Error in driver during machine creation: hyperkit crashed! command line:
hyperkit loglevel=3 console=ttyS0 console=tty0 noembed nomodeset norestore waitusb=10 systemd.legacy_systemd_cgroup_controller=yes random.trust_cpu=on hw_rng_model=virtio base host=minikube
💡 Suggestion: Hyperkit is broken. Upgrade to the latest hyperkit version and/or Docker for Desktop. Alternatively, you may choose an alternate --driver
🍿 Related issues:
▪ https://github.com/kubernetes/minikube/issues/6079
▪ https://github.com/kubernetes/minikube/issues/5780
And in the vpnkit log we see:
time="2022-02-14T06:07:57Z" level=debug msg="usernet: accepted vmnet connection"
time="2022-02-14T06:07:57Z" level=warning msg="Uwt: Pipe.listen: rejected ethernet connection: EOF"
time="2022-02-14T06:08:07Z" level=debug msg="usernet: accepted vmnet connection"
time="2022-02-14T06:08:07Z" level=warning msg="Uwt: Pipe.listen: rejected ethernet connection: EOF"
So kind of implies something is not right with how I started vpnkit. Have played with IP args to ensure it all matches, but does not help.
My guess is that the --ethernet=path arg is not the right type of socket. I have seen there is also --vsock-path=path but specifying this does not appear to create the socket file like --ethernet=path does. Do I have to create this some other way?
Or are there other config options I need to mess with. e.g. I thought --gateway-forwards=path could help, but can find no documentation on file format or contents.
So, I guess two main questions:
Is what we are trying even possible? Is it the the right way to go about it? Or is it much more complicated than simply running the vpnkit command?
If we are on the right track, does anyone have experience with this, and know how to set up the socket for minikube+vpnkit+hyperkit? What args, config, or other setup is required?
And just to note: --hyperkit-vpnkit-sock=auto is not an option for us, as we do not have docker installed, and so the docker socket file does not exist.
And just in case its a version issue:
k8> minikube version
minikube version: v1.25.1
commit: 3e64b11ed75e56e4898ea85f96b2e4af0301f43d
k8> vpnkit --version
854498c13b1884d4a48d84f3569eb34681af2126
k8> hyperkit -v
hyperkit: 0.20200908
Homepage: https://github.com/docker/hyperkit
License: BSD
I using macbook m1 and i have error when using test container from docker. When i start project using docker it throw me error
Docker machine "" does not exist
I install virtualbox using command :brew install virtualbox --cask
When i install success and start it throw me exception :
(default) Check network to re-create if needed...
(default) Creating a new host-only adapter produced an error: /usr/local/bin/VBoxManage hostonlyif create failed:
(default) 0%...
(default) Progress state: NS_ERROR_FAILURE
(default) VBoxManage: error: Failed to create the host-only adapter
(default) VBoxManage: error: VBoxNetAdpCtl: Error while adding new interface: failed to open /dev/vboxnetctl: No such file or directory
(default) VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component HostNetworkInterfaceWrap, interface IHostNetworkInterface
(default) VBoxManage: error: Context: "RTEXITCODE handleCreate(HandlerArg *)" at line 95 of file VBoxManageHostonly.cpp
(default)
(default) This is a known VirtualBox bug. Let's try to recover anyway...
Error setting up host only network on machine start: The host-only adapter we just created is not visible. This is a well known VirtualBox bug.
Now i cannot running testContainer because it required Docker machine. I cannot start because VirtualBox cannot running ? How to run it
Try Docker for Mac.
Also, make sure that you're using the latest version of Testcontainers and that your JNA dependency is 5.7.0 or newer.
I'm trying to create Docker Machine host with VirtualBox but when run: docker-machine create -d virtualbox dckr-host-1 appears this traceback error:
MacBook-Pro-de-Alberto:~ albertosanmartinmartinez$ docker-machine create -d virtualbox dckr-host-1
Running pre-create checks...
Creating machine...
(dckr-host-1) Copying /Users/albertosanmartinmartinez/.docker/machine/cache/boot2docker.iso to /Users/albertosanmartinmartinez/.docker/machine/machines/dckr-host-1/boot2docker.iso...
(dckr-host-1) Creating VirtualBox VM...
(dckr-host-1) Creating SSH key...
(dckr-host-1) Starting the VM...
(dckr-host-1) Check network to re-create if needed...
(dckr-host-1) Creating a new host-only adapter produced an error: /usr/local/bin/VBoxManage hostonlyif create failed:
(dckr-host-1) 0%...
(dckr-host-1) Progress state: NS_ERROR_FAILURE
(dckr-host-1) VBoxManage: error: Failed to create the host-only adapter
(dckr-host-1) VBoxManage: error: VBoxNetAdpCtl: Error while adding new interface: failed to open /dev/vboxnetctl: No such file or directory
(dckr-host-1) VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component HostNetworkInterfaceWrap, interface IHostNetworkInterface
(dckr-host-1) VBoxManage: error: Context: "RTEXITCODE handleCreate(HandlerArg *)" at line 95 of file VBoxManageHostonly.cpp
(dckr-host-1)
(dckr-host-1) This is a known VirtualBox bug. Let's try to recover anyway...
Error creating machine: Error in driver during machine creation: Error setting up host only network on machine start: The host-only adapter we just created is not visible. This is a well known VirtualBox bug. You might want to uninstall it and reinstall at least version 5.0.12 that is is supposed to fix this issue
But the host are created, when run docker-machine ls appears:
NAME ACTIVE DRIVER STATE URL SWARM DOCKER ERRORS
dckr-host-1 - virtualbox Stopped Unknown
I have uninstalled and reinstalled VirtualBox in the latest version 6.1 and restart the Docker and the laptop but the error persists.
Anybody could help me please ?
Thanks in advance.
I'm on Mac laptop, I would say that when trying to download and install the ISO image it crashed.
To solve this:
System Preferences -> Security and Privacy -> General -> Allow
"Oracle" applications what are blocked.
I have a fresh bare-metal installation of ubuntu 16.04 on a lenovo laptop. I've downloaded virtualbox via apt-get, and am going through the docker tutorials. I was going through the docker-machine docs and encountered the following error:
21:11:57-~ $ docker-machine create --driver=virtualbox vbox-test
Running pre-create checks...
Creating machine...
(vbox-test) Copying /home/zach/.docker/machine/cache/boot2docker.iso to /home/zach/.docker/machine/machines/vbox-test/boot2docker.iso...
(vbox-test) Creating VirtualBox VM...
(vbox-test) Creating SSH key...
(vbox-test) Starting the VM...
(vbox-test) Check network to re-create if needed...
Error creating machine: Error in driver during machine creation: Unable to start the VM: /usr/bin/VBoxManage startvm vbox-test --type headless failed:
VBoxManage: error: VT-x is disabled in the BIOS for all CPU modes (VERR_VMX_MSR_ALL_VMX_DISABLED)
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component ConsoleWrap, interface IConsole
Details: 00:00:00.463735 Power up failed (vrc=VERR_VMX_MSR_ALL_VMX_DISABLED, rc=NS_ERROR_FAILURE (0X80004005))
I'm not sure where to go from here. Rebooting into the BIOS, I was finally able to enable something called "Intel TXT" which appeared to pertain to virtualization, but the large friendly menu is gone and the error persists.