I have tried following few tutorials but getting the same error every time.
I tried installing using bundle methods:
bundle init (in project repository)
I added gem "fastlane" in Gemfile and then used bundle install to install fastlane.
But when I fastlane init raises an error zsh: command not found: fastlane
following tutorial =
Try
export PATH="$HOME/.fastlane/bin:$PATH" in your shell.
If it works, add it to the .zshrc to make it permanent.
source .zshrc again in the same session or restart the shell (e.g., restart the terminal).
============= EDIT =============
Substitute export PATH="$HOME/.fastlane/bin:$PATH" with export PATH="/usr/local/bin/fastlane" if ~/.fastlane does not exist and /usr/local/bin/fastlane does.
If cd ~/.fastlane works, proceed with $HOME/.fastlane/bin, and if it doesn't & ls /usr/local/bin | grep fastlane finds fastlane, substitute with /usr/local/bin/fastlane.
The export PATH="$HOME/.fastlane/bin:$PATH" part should be typed directly into the shell command line, i.e., the console you typed bundle init in.
If this solves your problem, then add the line export PATH="$HOME/.fastlane/bin:$PATH" to the end of your .zshrc file. This file can be found in your home directory ~.
In the terminal, cd ~ and list all the files in the directory by ls -al. If you see .zshrc, open it with an editor of your choice, e.g., nano if you are new to command line tools, vim, pico, etc.
At the end of the file, add
export PATH="$HOME/.fastlane/bin:$PATH"
If .zshrc does not exist, create one under your home directory and add the above line (Then your single-line .zshrc will only contain the above command.).
Related
I have recently installed PIPX on MAC running Big Sur and ZSH shell. During the install it prompted for the following to be added to the .zshrc file....
# Created by `pipx` on 2021-03-20 14:22:23
export PATH="$PATH:/Users/xxxx/.local/bin"
eval "$(register-python-argcomplete pipx)"
Running echo $PATH showed /Users/xxxx/.local/bin added to the end of my PATH variable. However, when I close the terminal and open up a new session, running echo $PATH now shows the location duplicated at the end of the PATH :/Users/xxxx/.local/bin:/Users/xxxx/.local/bin
Opening and closing new terminal sessions doesn't seem to create any more additions to PATH it just remains at these 2 entries....
I have run typeset -U PATH path to remove the duplicate but each time I open up new terminal sessions it just duplicates again.
Does anybody know how I can stop this from happening.....I would really like to keep my PATH variable as clean as possible.
Add the following path to your .zshrc file :
export PATH="${PATH}:$(python3 -c 'import site; print(site.USER_BASE)')/bin"
Reference: [command not found: pipx]: https://github.com/pipxproject/pipx/issues/283
I have no idea what I am doing here, I am trying to install fastlane via terminal, but I keep getting this error:
Couldn't detect shell config file (zsh - ~/.zshrc) Please add the
following line to your zsh profile: export
PATH="$HOME/.fastlane/bin:$PATH"
My question is how do I locate and add this line to my zsh profile?
I have absolutely no idea what I am doing here.
You should add this line in your bash profile :
export PATH="$HOME/.fastlane/bin:$PATH"
There are (mainly) two user level files which bash may run when a bash shell starts.
~/.bash_profile or ~/.bashrc.
And its depend your OS.
I'm trying to extend my $PATH variable in git bash (MinGW shell) by adding the following to the file ~/.bashrc
PATH=$PATH':/c/Program Files/maven/apache-maven-3.2.5/bin'
After I did this and restarted the bash it seems like that the $PATH variable was extended like expected:
$ echo $PATH
MANY_OTHER_PATHS:/c/Program Files/maven/apache-maven-3.2.5/bin
But I still cannot execute the programms in the given directory:
$ mvn
bash: mvn: command not found
What went wrong here? How do I extend the PATH variable correctly?
Here are two ideas.
You can have your path with double quote mark.
export PATH=$PATH:"/C/Program Files (x86)/apache-maven-3.3.3/bin"
Or, You can also make symbolic link for the directory.
ln -s "/C/Program Files (x86)/apache-maven-3.3.3/bin" ./mvnbin
export PATH=$PATH:/your-path/mvnbin
It works for me in mingw32 environment.
I needed to add something to my Git Bash path permanently each time I open it. It was Meld.exe path which can be added with:
export PATH=$PATH:"/C/Program Files (x86)/Meld/lib"
In order to execute this command each bash session, you need a ~/.bashrc file. Check if it already exists or create it using notepad ~/.bashrc or touch ~/.bashrc.
You can check where it is with:
echo ~
Open it and add the command that adds the PATH (first command in this response).
I hope you found this useful.
According to this SO post, you need to escape Program Files with quotes. git-bash $PATH cannot parse windows directory with space
Add PATH in Git Bash Permanently | Windows Only
Just in case you are still wondering how to add a path permanently in git bash here is the step-by-step process for Windows users:
Create .bashrc in user's root folder using the below command. It will open notepad and ask you to create the file, click yes.
notepad ~/.bashrc
Put the directory you want to add as below, for more than 1 items repeat the same format in next line:
export PATH=$PATH:"/c/folder/folder/"
Save the file and relaunch the bash.
Next launch will give you a warning like WARNING: Found ~/.bashrc but no ~/.bash_profile, ~/.bash_login or ~/.profile. but git bash will handle it by creating the required files.
SOME INSIGHTS
Git Bash doesn't fetch Window's environment PATH, it maintains its PATH separately in more like a Linux way.
You can run export PATH=$PATH:"/c/folder/folder/" in cmd to add a directory to path, but it will be only for the current session once you close the bash, it will be gone.
.bashrc is a shell script file that will be executed every time you launch a new git bash window. So you can add any type of bash command here. We simply added the export command to add our desired directory to PATH.
I'm a complete newbie, so I think I'm just missing a step, but have no idea.
I'm following tutorials for Rails. Lots of steps say, "and then editing the ~/.zshrc file." but I don't have any ~/.zshrc file. I'm looking at the folders in Sublime. Also none of the following ~/.zprofile, ~/.zlogin, ~/.zlogout exist. Though, under my home files, there is .zprezto folder. No zshenv either...
Do I just create the files? Seems like they should be downloaded from somewhere. I'm using Terminal with OS X. So lost.
echo 'write whatever' >.zshrc
Thanks in advance!
You will get ~/.zshrc file only when you use zsh shell on your Mac OS. If you're not sure which shell you're using, open terminal and issue the following command.
echo $SHELL
if you get response like /bin/zsh then you're using zsh shell on your Mac. You can edit ~/.zshrc file using vim editor on your Mac which is the default for Mac OS.
to open ~/.zshrc file using vim editor, issue the following command on your terminal.
vim ~/.zshrc
Then you can do any configurations you need. Or else you can use open -t .zshrc command to open ~/.zshrc file from your general TextEdit on Mac OS.
$ open ~/.zshrc
Make changes in the .zshrc file window that opens
Save file
$ source ~/.zshrc
The .zshrc file is used to configure your terminal prompt if you're using zsh (z-shell) login shell (n.b., a "login shell" is the command line presented to you when running the terminal application). If you're using a standard OSX terminal, then you're probably using bash (the BASH Shell), so editing .zshrc wouldn't affect anything. Bash uses .bashrc and .bash_profile` for it's configuration. These file are run overtime you open terminal window and setup things the command aliases, setup your prompt and maybe run scripts to initial other programs.
You almost certainly don't need to edit terminal config files to develop with Ruby on Rails, especially as editing these files incorrectly can mess up your system, or at least make it hard to return the system to a stable state.
I usually use the vi(vim) editor to edit the .zshrc file.
1)To open ~/.zshrc
vi .zshrc
or
vi ~/.zshrc
or
You can open the file in VsCode, and it would be easier to edit it.
code .zshrc
2)To update the edited .zshrc file:
source ~/.zshrc
or
source .zshrc
If you are using zsh shell , run the below lines in the terminal:
echo 'setopt PROMPT_CR' >.zshrc
echo 'setopt PROMPT_SP' >.zshrc
echo 'export PROMPT_EOL_MARK=""' >.zshrc
You can edit zshenv instead of zshrc for appending PATH . Please check whether file already exists
cat ~/.zshevn
You can edit file using below command
vi ~/.zshenv
You can refer this to see how to add an entry in PATH
I am installing software on my MacBook Pro in preparation for a Rails tutorial. One of the steps involves creating a symbolic link to Sublime Text 2 so that it can be used in Bash. To do this, Sublime Text advises
The first task is to make a symlink to subl. Assuming you've placed Sublime Text 2 in the Applications folder, and that you have a ~/bin directory in your path, you can run:
ln -s "/Applications/Sublime Text 2.app/Contents/SharedSupport/bin/subl" ~/bin/subl
When I run this command, I get
ln: /Users/nngrey/bin/subl: No such file or directory
My path seems to include ~/bin:
echo $PATH
/Users/nngrey/.rvm/gems/ruby-2.0.0-p247#railstutorial_rails_4_0/bin:/Users/nngrey/.rvm/gems/ruby-2.0.0-p247#global/bin:/Users/nngrey/.rvm/rubies/ruby-2.0.0-p247/bin:/Users/nngrey/.rvm/bin:/Library/Frameworks/Python.framework/Versions/Current/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin
Any suggestions?
Thanks
Your $PATH does not, in fact, contain ~/bin. If you look closely, /Users/nngrey/bin is not there. The original ln -s ... command probably failed because ~/bin doesn't exist. To make it, run mkdir ~/bin from Terminal. Then, rerun the ln command. Finally, run ~/bin/subl ~/.profile to open your ~/.profile file in Sublime, and add the following line to the bottom:
export PATH=$PATH:~/bin
Save the file, then restart your Terminal session and you should be able to type subl filename from the command line in any directory.