Let's say I have some labels in a part of the document that I exclude using pagesel. However, I want to reference them in the part that I am including. How is that possible?
Below is a minimum example which should print "This is reference 1", but instead prints "This is reference ??".
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[files,2-]{pagesel}
\title{Pagesel problem}
\begin{document}
\maketitle
\section{Introduction}
This is label \label{ref:label1}.
\cleardoublepage
This is reference \ref{ref:label1}
\end{document}
You can retain the labels from pages not shown by first compiling your whole document without the pagesel package and then, in a second step, use the pagesel package with the default nofile option:
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[
%files,
2-]{pagesel}
\title{Pagesel problem}
\begin{document}
\maketitle
\section{Introduction}
This is label \label{ref:label1}.
\cleardoublepage
This is reference \ref{ref:label1}
\end{document}
Other possible approach: compile the complete document and then use a tool like pdftk to extract the pages you like.
Related
I am trying to use the LaTeX article document class to create a simple paper with the authors listed on the title page with their (potentially multiple repeating) affiliations as numeric footnotes and other author comments as symbolic footnotes. For example, I want something like
However, I haven't been able to make this happen despite trying multiple different solutions. Is there a simple way to do this?
I have tried using the bigfoot package to create multiple different types of footnotes combined with footmisc with the multiple option to get multiple footnote markers with commas between them, but I end up with superposed markers and no footnotes. My minimal latex document is:
\documentclass{article}
\title{My title}
\usepackage[multiple]{footmisc}
\usepackage{bigfoot}
\DeclareNewFootnote{AAffil}[arabic]
\DeclareNewFootnote{ANote}[fnsymbol]
\author{
David Kaplan\footnoteAAffil{A University}\footnoteAAffil{Another University}\footnoteANote{Corresponding author}\footnoteANote{Equal contributors}
\and
Prince Charming\FootnotemarkAAffil{2}\FootnotemarkANote{2}
}
\date{\today}
\begin{document}
\maketitle
\end{document}
And the output I get is:
One possibility is to switch to the amsart class and then using the amsaddr package:
\documentclass{amsart}
\title{My title}
\author{David Kaplan $^{1,2,\ast,\dagger}$}
\address{$^1$A University}
\address{$^2$Another University}
\address{$^{\ast}$Corresponding author}
\address{$^{\dagger}$Equal contributors}
\author{Prince Charming $^{1,\dagger}$}
\usepackage[foot]{amsaddr}
\begin{document}
\maketitle
\end{document}
With help from others, I posted a solution to this question here. For completeness, I am copying the solution below:
\documentclass{article} % <---- No titlepage
\title{My title}
%\usepackage[dont-mess-around]{fnpct} % <---- I decided not to use fnpct, but rather put in the commas by hand
\usepackage{bigfoot}
\DeclareNewFootnote{AAffil}[arabic]
\DeclareNewFootnote{ANote}[fnsymbol]
\usepackage{etoolbox}
\makeatletter
\patchcmd\maketitle{\def\#makefnmark{\rlap{\#textsuperscript{\normalfont\#thefnmark}}}}{}{}{}
\makeatother
% Hook into the \thanks command for the article class to print the footnotes
\makeatletter
\def\thanksAAffil#1{% <--- These %'s are necessary for spacing
\footnotemarkAAffil\protected#xdef\#thanks{\#thanks%
\protect\footnotetextAAffil[\the \c#footnoteAAffil]{#1}}%
}
\def\thanksANote#1{%
\footnotemarkANote%
\protected#xdef\#thanks{\#thanks%
\protect\footnotetextANote[\the \c#footnoteANote]{#1}}%
}
\makeatother
\author{% <---- Not sure if these %'s are necessary, but can't hurt
David Kaplan%
\thanksAAffil{A University}$^{,}$\thanksAAffil{Another University}$^{,}$%
\thanksANote{Corresponding author}$^{,}$\thanksANote{Equal contributors}%
, %
Prince Charming%
\footnotemarkAAffil[2]$^{,}$\thanksAAffil{Still another university}$^{,}$\footnotemarkANote[2]$^{,}$%
\thanksANote{Another note}%
, %
Mohamed Ali%
\thanksAAffil{I am the greatest U.}%
}
\date{\today}
\begin{document}
\maketitle
\begin{abstract}
This is the abstract.
\end{abstract}
\section{Introduction}
More Text
\end{document}
I am trying to make a .tex template for a book of abstracts for the conference. I want the template to be compilable, so the participants are able to see their abstracts separately before submitting. Moreover I want to use the files to compile the book of abstracts with table of contents and titles.
So, I have master file
\documentclass[12pt]{combine}
\usepackage{authblk}
\begin{document}
\tableofcontents
\begin{papers}
\coltocauthor{Crist\'{o}bal Josevich Junta, Fyodor Simeonovich Kivrin}
\coltoctitle{Title of the first abstract}
\import{first}
\coltocauthor{Roman Oyra-Oyra}
\coltoctitle{Title of the second abstract}
\import{second}
\end{papers}
\end{document}
And two imported files are:
\documentclass{article}
\usepackage{authblk}
\title{Title of the first abstract}
\author[1]{Crist\'{o}bal Josevich Junta}
\author[2]{Fyodor Simeonovich Kivrin}
\affil[1]{Department of the Meaning of Life}
\affil[2]{Department of Linear Happiness}
\begin{document}
\maketitle
Text of the first abstract.
\end{document}
and
\documentclass{article}
\usepackage{authblk}
\title{Title of the second abstract}
\author[1]{Roman Oyra-Oyra}
\affil[1]{Laboratory of the most unexpected sciences}
\begin{document}
\maketitle
Text of the second abstract.
\end{document}
The problem is the second \maketitle does not print authors names and their affiliation.
I have tried using redefined \settitle instead of \maketitle
\makeatletter
\newcommand{\settitle}{\#maketitle}
\makeatother
it did not help.
Also, I tried titling package, which led to no change.
I want \maketitle to print the names and affiliations or to find out the better way to automatically make titles for each abstract.
In bibtex it is very easy to remove all labels in the bibliography; as, for instance, described here
https://stackoverflow.com/a/3003759/6936361.
I cannot find the equivalent to
\makeatletter
\def\#biblabel#1{}
\makeatother
for biblatex.
If I have, for example, this code:
\documentclass{scrartcl}
\usepackage[style=alphabetic]{biblatex}
\addbibresource{foo.bib}
\begin{document}
\nocite{*}
\printbibliography
\end{document}
I get this
Instead, I would like to have something like this:
How can I remove the labels in the bibliography list without changing the style with biblatex?
As a quick hack, you can redefine the bibliography environment:
\documentclass{scrartcl}
\usepackage[style=alphabetic]{biblatex}
\addbibresource{biblatex-examples.bib}
\defbibenvironment{bibliography}
{\list
{}
{%
\setlength{\labelwidth}{0pt}%
\setlength{\leftmargin}{0pt}%
\setlength{\labelsep}{0pt}%
\addtolength{\leftmargin}{0pt}%
\setlength{\itemsep}{\bibitemsep}%
\setlength{\parsep}{\bibparsep}}%
\renewcommand*{\makelabel}[1]{##1\hss}}
{\endlist}
{\item}
\begin{document}
\cite{knuth:ct:a}
\nocite{*}
\printbibliography
\end{document}
(personally I would use an authoryear style instead to avoid having labels in text without any correspondence in the bibliography)
How can I temporarily cause pdfLaTeX to forget everything that I've told it and start with a new document class?
I've modified the example environment from the lshort document:
\newwrite\examplesx#out
\newenvironment{examplesx}{%
\begingroup% Lets Keep the Changes Local
\#bsphack
\immediate\openout \examplesx#out \jobname.exa
\let\do\#makeother\dospecials\catcode`\^^M\active
\def\verbatim#processline{%
\immediate\write\examplesx#out{\the\verbatim#line}}%
\verbatim#start
}{%
\immediate\closeout\examplesx#out\#esphack\endgroup%
\noindent\makebox[\textwidth][l]{%
\begin{minipage}[c]{0.45\textwidth}%
\small\verbatiminput{\jobname.exa}
\end{minipage}%
\hspace*{0.1\textwidth}%
\framebox{%
\begin{minipage}{0.45\textwidth}%
\small\input{\jobname.exa}%
\end{minipage}
}%
}\vspace*{\parskip}%
}
and it mostly works, but I want to be able to do something like
\begin{examplesx}
\section{Section}
\end{examplesx}
and have it show up as a section in a box. I also would like it to typeset lists using the standard article style, even if I use it in beamer
I think that the easiest way of doing this is to compile some small document and then include the resultant pdf as an image into the larger document. Much simpler even if not exactly what you want. I have done this to show, in a Beamer presentation, what LaTeX articles look like.
Of course if its a REALLY simple document (e.g., a simple block of text) that you want to have inside beamer, I could recommend that you mimic the document with a TikZ "picture" that contains some text.
Maybe another approach: instead of trying to typeset things in beamer as if they would be done in article, simply typeset them with the article document class and include the result the in the beamer document.
With tcolorbox this can be done automatically:
% !TeX program = txs:///arara
% arara: pdflatex: {synctex: on, interaction: nonstopmode, shell: yes}
\documentclass{beamer}
\usepackage[most]{tcolorbox}
\begin{document}
\begin{frame}[fragile]
\begin{tcblisting}{
comment only,
pdf comment,
compilable listing,
run pdflatex,
}
\documentclass{article}
\begin{document}
\section{Section Title}
test
\end{document}
\end{tcblisting}
\end{frame}
\end{document}
I have a report in LaTeX, and i have used the following commands to create my Appendix, however, my lecturer states that any divider pages should be unnumbered.
\documentclass{report}
\usepackage{appendix}
\begin{document}
\include{chap1}
\include{appendix}
\end{document}
Then in appendix.tex
\appendix
\pagestyle{empty}
\appendixpage
\noappendicestocpagenum
\addappheadtotoc
This creates the Appendices divider page, but still puts a page number on it in the footer. There is no page number in the TOC, as expected.
How can I remove it from the footer?
I looked at the appendix.sty source, and I see the problem: line 74, in the definition of \#chap#pppage, issues a \thispagestyle{plain} command, thus overriding your \pagestyle{empty} for this page. The inelegant but direct way to fix this is to redefine the command without this line - issue the following code after importing the package.
Revised, tested version
\documentclass{report}
\usepackage{appendix}
%==== The action ================
\makeatletter
\def\#chap#pppage{%
\clear#ppage
\if#twocolumn\onecolumn\#tempswatrue\else\#tempswafalse\fi
\null\vfil
\markboth{}{}%
{ \centering \interlinepenalty \#M
\normalfont \Huge \bfseries \appendixpagename\par}%
\if#dotoc#pp\addappheadtotoc\fi
\vfil\newpage
\if#twoside
\if#openright \null \thispagestyle{empty}\newpage\fi
\fi
\if#tempswa \twocolumn\fi
}
\makeatother
%==== Back to the document ========
\begin{document}
\tableofcontents
\chapter{Blah}
Rhubarb, rhubarb, rhubarb.
\appendix
\pagestyle{empty}
\appendixpage
\noappendicestocpagenum
\addappheadtotoc
\chapter{Boff}
Cabbages, cabbages, cabbages.
\end{document}
The TeX FAQ might come in handy here:
I asked for “empty”, but the page is numbered
If you use \pagestyle{empty} and you
find some pages are numbered anyway,
you are probably encountering one of
the style decisions built into the
standard LaTeX classes: that certain
special pages should always appear
with \pagestyle{plain}, with a page
number at the centre of the page foot.
The special pages in question are
those (in article class) containing a
\maketitle, or (in book and report
classes) \chapter or \part commands.
The simple solution is to reissue the
page style after the command, with
effect for a single page, as, for
example (in article):
\maketitle
\thispagestyle{empty}
So give adding \thispagestyle{empty} after your \appendix a try.
try changing \pagestyle{empty} to \thispagestyle{empty} and put it after \addappheadtotoc.
Try instead:
\pagenumbering{gobble}
\begin{appendices} \newpage
\clearpage
\pagenumbering{arabic}
\addtocounter{page}{100}
\tableofcontents
\newpage
*Special thanks to https://tex.stackexchange.com/questions/6639/removing-page-numbers-but-not-headers!