I downloaded minikube after that ...
I did minikube start... so, node started
I played around with some containers(deployment object)
Now when I am doing docker ps => it's showing all the k8's container running -_-"
What I wanted to see is the local Docker Daemon containers rather than Vm's containers
When I run minikube docker-env it shows:
Exiting due to ENV_DRIVER_CONFLICT: 'none' driver does not support 'minikube docker-env' command
What should I do now to connect to local Docker Daemon ?
I am using Ubuntu 18 :)
Since you started minikube without specifying driver, the host docker daemon will be used, so you can access it without any special environment variables. That’s why you see “ Exiting due to ENV_DRIVER_CONFLICT: 'none' driver does not support 'minikube docker-env' command”
Try starting minikube using other driver viz minikube start --driver=hyperkit
or stopping minkikube
Related
I installed minikube and now I want to create my docker containers, but how do I run the docker commands? I tried the following from command prompt
But it does not recognize docker as a command.
Also I tried from PowerShell with the same result, docker not recognized.
I currently only have minikube installed on my workstation because I was given the impression from comments to a previous question that I did not need Docker Desktop (see Unable to connect to running docker containers (minikube docker daemon))
In this SO question there is an answer that will show you 3 ways how to make Minikube and Docker work on Windows:
Scenarios are like this:
1) Use Docker, and minikube with Hyper-V (you will find instruction in
an answer above) Enable Hyper-V, install Docker, use minikube with
arguments minikube start --vm-driver hyperv --hyperv-virtual-switch
"<created Hyper-V switch name>" In the same time you will be able to
interact with Docker in normal way. Use kubectl/minikube commands for
your Kubernetes cluster and Docker commands for Docker. 2) Use
VirtualBox for Kubernetes and Docker toolbox for Docker minikube
start --vm-driver=virtualbox
3) Use Docker for Windows and Kubernetes in Docker
I believe this will solve your issue. Please, let me know if that helped.
I have installed minikube on my laptop, I see that minikube uses docker daemon running within cluster.
Is it possible to run minikube to use the host machine docker daemon?
I tried using
export DOCKER_HOST="tcp://localhost:2376"
ran, minikube start
and, minikube start --docker-env=DOCKER_HOST="tcp://localhost:2376"
Both did not work.
Is it possible to run minikube to use the host machine docker daemon?
No. Minikube runs in a VM, and can't connect to the host's /var/run/docker.sock file. (The setup you show requires a non-default host Docker configuration with significant risk of just outright getting the host rooted, and from the VM's point of view, localhost is the VM.)
You can do the opposite, though, set your local Docker daemon to talk to minikube's Docker daemon
eval $(minikube docker-env)
(Also remember that Kubernetes is designed for multi-host deployments based around immutable images. If you're trying to do live development inside a Kubernetes pod, it is rather complicated and translates poorly to production environments. Use plain Docker, or better still, install a development environment directly on your host. If you're just trying to test out deployment wiring, minikube, or the Kubernetes included in Docker Desktop, or other tools like kind work just fine.)
#David Maze, it's not completely true what you wrote in your answer:
No. Minikube runs in a VM, and can't connect to the host's
/var/run/docker.sock file.
Let's say it can be true only in particular case, so the following question:
Is it possible to run minikube to use the host machine docker daemon?
I would answer: Yes, it is. However typical Minikube instance runs on a separate VM, it is still possible to run it directly on the host. More on that you can read in minikube installation guide in official Kubernetes documentation:
Note: Minikube also supports a --vm-driver=none option that runs the
Kubernetes components on the host and not in a VM. Using this driver
requires Docker and a Linux environment but not a hypervisor. It is
recommended to use the apt installation of docker from Docker, when
using the none driver. The snap installation of docker does not work
with minikube.
#Sunil Gajula, adding following flag:
--vm-driver=none
when running your Minikube instance should actually resolve your problem as it is not set by default to none and it seems the missing element in your attempts to run Minikube on your local machine. So by default it runs in a VM, using one of the available hypervisors ( if you don't specify above mentioned flag).
I got this working on my mac OS.
And I use fish:
##install docker-cli
#brew install docker
#brew install minikube hyperkit
## run minikube without kubernetes enabled
#minikube start --memory 6144 --cpus 4 --docker-opt=bip=172.17.42.1/16 --no-kubernetes
# minikube -p minikube docker-env | source (put the result into config and source it)for bash/zsh: minikube docker-env
And if you want to run minikube k8s cluster:
you can:
# minikube start --addons=registry --cni=calico --driver=hyperkit --cpus=8 --memory=8g (or some simple command)
You may need to install docker-machine-driver-hyperkit with install command.
With everything ok, you can use docker-cli to interact docer daemon in minikube.
I have installed minikube and started it with it's default virtual machine so basically started the minikube with minikube start. In minikube vm which i have accessed through minikube ssh i am trying to build my dockerfile after mounting the local file system but it's showing error Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?
I checked the ActiveState of docker through systemctl show --property ActiveState docker and it's showing failed but the docker version is showing me all the normal details like version built etc.
This is the statement that i am trying to execute : $ sudo docker build --file=Dockerfile --tag=demo-backend:latest --rm=true .
Should i install docker seperatley and if not how should access docker in VM which is already present in my system
It looks like somehow docker has not started properly.
Please try to execute sudo systemctl start docker and let me know if that was the issue.
EDIT:
Adding more info from the comments in order to supplement the answer:
I had to set the docker environment variable to local instance of
docker running in minikube through this command: eval $(minikube
docker-env) and then restart the docker and all of this has to done in
the same shell in which i aim to access the docker otherwise it does
not works. this made me acces the docker from minikube – rehan
I am running minikube using the instructions at
https://kubernetes.io/docs/tutorials/hello-minikube/
I started minikube:
$ minikube start --vm-driver=hyperkit
and verified that it is successfully running.
I am running 'Docker Community Edition' version 18.06.1-ce-mac73.
$ minikube ssh
is working fine.
However when I do
$ docker ps
on my mac os host, it doesn't show any containers. However, when I do
$ docker ps
after doing minikube ssh, I see about 20 containers.
So, where are the docker containers really running? Why does docker ps not show any containers on my mac?
Thank you.
You can use the following command to configure your Docker Host address:
eval $(minikube docker-env)
Then, when you run docker ps, you should see your containers. Read more here.
Docker containers are not running on your MAC host.
They are running on a VM where you can do minikube ssh to that VM.
The docker ps shows the containers in there inside that VM.
That's expected because you are using hyperkit driver to work as a hypervisor & launch lightweight virtual machines. Think of it as virtualbox launching VMs for you & complete k8s cluster is deployed into those VMs, all of them are well integrated.
Use below to get your virtual machine address or the server where these containers are actually running -
$ minikube ip
Ref -
https://github.com/moby/hyperkit
Since I can't add a comment:
To revert the change in your shell, use
eval $(minikube docker-env -u)
as answered here: How do I undo the command $ eval "$(docker-machine env blog)"
I am really confused, I had being learning kubernetes with minikube creating services and other things.
The problem comes in the following shape:
I run the following commands after a fresh install of minikube:
eval $(minikube docker-env)
The reason is because I want to get an image from my computer to be used with minikube. My understanding is that with this command I am in the same context for minikube and docker, so I can access my local images. "Please correct me if I am wrong here".
minikube start
So I get up and running the cluster, and ready to start creating things.
I want to pull the following container:
docker pull nginx/nginx-ingress
Because I want to try an ingress controller to work with my services.
But then I get this weird message:
Using default tag: latest
Warning: failed to get default registry endpoint from daemon (Cannot connect to the Docker daemon at tcp://192.168.99.101:2376. Is the docker daemon running?). Using system default: https://index.docker.io/v1/
Cannot connect to the Docker daemon at tcp://192.168.99.101:2376. Is the docker daemon running?
I run:
docker ps
And no results with a hang out.
I go to another terminal, I run the docker ps and it works like a charm.
Please if someone can bring some light to me of the impact of the command:
eval $(minikube docker-env)
And if you know why in my current Term with minikube running cannot access to my docker machine would help a lot.
minikube starts a dedicated virtual machine as a single-node Kubernetes cluster. If you have other Docker environments (a separate Docker Machine VM, the Docker Toolbox VM, the Docker for Mac or Docker for Windows environments, or a Linux-native Docker) these are separate from the Docker in the VM. You can't share images or containers between these environments.
If you have private images that aren't published to a registry, you'll have to re-docker build them when you switch to the Minikube environment. You otherwise don't specifically have to docker pull things that you're using, when you reference them in a Kubernetes pod spec Kubernetes will pull them for you.