I am trying a basic docker test in GCP compute instance. I pulled a tomcat image from the official repo. then ran a command to run the container. Command is :
docker run -te --rm -d -p 80:8080 tomcat
It created a container for me with below id.
3f8ce49393c708f4be4d3d5c956436e000eee6ba7ba08cba48ddf37786104a37
If I do docker ps, I get below
docker run -te --rm -d -p 80:8080 tomcat
3f8ce49393c708f4be4d3d5c956436e000eee6ba7ba08cba48ddf37786104a37
However the tomcat admin console does not open. The reason is tomcat image is trying to create the config files under /usr/local. However, it is a read only file system. So the config files are not created.
Is there a way to ask Docker to create the files in a different location? Or, is there any other way to handle it?
Thanks in advance.
I followed the standard Odoo container instructions on Docker to start the required postgres and odoo servers, and tried to pass host directories as persistent data storage for both as indicated in those instructions:
sudo mkdir /tmp/postgres /tmp/odoo
sudo docker run -d -v /tmp/postgres:/var/lib/postgresql/data/pgdata -e POSTGRES_USER=odoo -e POSTGRES_PASSWORD=odoo -e POSTGRES_DB=postgres --name db postgres:10
sudo docker run -v /tmp/odoo:/var/lib/odoo -p 8069:8069 --name odoo --link db:db -t odoo
The Odoo container shows messages that it starts up fine, but when I point my web browser at http://localhost:8069 I get no response from the server. By contrast, if I omit the -v argument from the Odoo docker run command, my web browser connects to the Odoo server fine, and everything works great.
I searched and see other people also struggling with getting the details of persistent data volumes working, e.g. Odoo development on Docker, Encountered errors while bringing up the project
This seems like a significant gap in Docker's standard use-case that users need better info on how to debug:
How to debug why the host volume mounting doesn't work for the odoo container, whereas it clearly does work for the postgres container? I'm not getting any insight from the log messages.
In particular, how to debug whether the container requires the host data volume to be pre-configured in some specific way, in order to work? For example, the fact that I can get the container to work without the -v option seems like it ought to be helpful, but also rather opaque. How can I use that success to inspect what those requirements actually are?
Docker is supposed to help you get a useful service running without needing to know the guts of its internals, e.g. how to set up its internal data directory. Mounting a persistent data volume from the host is a key part of that, e.g. so that users can snapshot, backup and restore their data using tools they already know.
I figured out some good debugging methods that both solved this problem and seem generally useful for figuring out Docker persistent data volume issues.
Test 1: can the container work with an empty Docker volume?
This is a really easy test: just create a new Docker volume and pass that in your -v argument (instead of a host directory absolute path):
sudo docker volume create hello
sudo docker run -v hello:/var/lib/odoo -p 8069:8069 --name odoo --link db:db -t odoo
The odoo container immediately worked successfully this way (i.e. my web browswer was able to connect to the Odoo server). This showed that it could work fine with an (initially) empty data directory. The obvious question then is why it didn't work with an empty host-directory volume. I had read that Docker containers can be persnickety about UID/GID ownership, so my next question was how do I figure out what it expects.
Test 2: inspect the running container's file system
I used docker exec to get an interactive bash shell in the running container:
sudo docker exec -ti odoo bash
Inside this shell I then looked at the data directory ownership, to get numeric UID and GID values:
ls -dn /var/lib/odoo
This showed me the UID/GID values were 101:101. (You can exit from this shell by just typing Control-D)
Test 3: re-run container with matching host-directory UID:GID
I then changed the ownership of my host directory to 101:101 and re-ran the odoo container with my host-directory mount:
sudo chown 101:101 /tmp/odoo
sudo docker stop odoo
sudo docker rm odoo
sudo docker run -v /tmp/odoo:/var/lib/odoo -p 8069:8069 --name odoo --link db:db -t odoo
Success! Finally the odoo container worked properly with a host-directory mount. While it's annoying the Odoo docker docs don't mention anything about this, it's easy to debug if you know how to use these basic tests.
I am using Jenkins (2.32.2) Docker container with the Publish over ssh plugin (1.17) and I have added a new server manually.
The newly added server is another Docker container (both running with docker-compose) and I am using a password to connect to it, and everything works just fine when doing it manually, but the problem is when I'm rebuilding the image.
I am already using a volume for the jenkins gone directory and it works just fine. The problem is only on the initial installation (e.g. image build, not a container restart).
It seems like the problem is with the secret key, and I found out that I also need to copy some keys when creating my image.
See the credentials section at Publish over ssh documentation
I tried to copy all the "secrets" directory and the following files: secret.key, secret.key.not-so-secret, identity.key.enc - but I still can't connect after a fresh install.
What am I missing?
Edited:
I just tried to copy the whole jenkins_home directory on my DOCKERFILE and it works, so I guess that the problem is with the first load or something? maybe Jenkins changes the key / salt on the first load?
Thanks.
try to push out jenkins config to docker host of to os where docker host is being installed
docker run --name myjenkins -p 8080:8080 -p 50000:50000 -v /var/jenkins_home jenkins
or
docker run --name myjenkins -p 8080:8080 -p 50000:50000 -v ./local/conf:/var/jenkins_home jenkins
If I have a docker container that I started a while back, what is the best way to set an environment variable in that running container? I set an environment variable initially when I ran the run command.
$ docker run --name my-wordpress -e VIRTUAL_HOST=domain.example --link my-mysql:mysql -d spencercooley/wordpress
but now that it has been running for a while I want to add another VIRTUAL_HOST to the environment variable. I do not want to delete the container and then just re-run it with the environment variable that I want because then I would have to migrate the old volumes to the new container, it has theme files and uploads in it that I don't want to lose.
I would just like to change the value of VIRTUAL_HOST environment variable.
There are generaly two options, because docker doesn't support this feature now:
Create your own script, which will act like runner for your command. For example:
#!/bin/bash
export VAR1=VAL1
export VAR2=VAL2
your_cmd
Run your command following way:
docker exec -i CONTAINER_ID /bin/bash -c "export VAR1=VAL1 && export VAR2=VAL2 && your_cmd"
Docker doesn't offer this feature.
There is an issue: "How to set an enviroment variable on an existing container? #8838"
Also from "Allow docker start to take environment variables #7561":
Right now Docker can't change the configuration of the container once it's created, and generally this is OK because it's trivial to create a new container.
For a somewhat narrow use case, docker issue 8838 mentions this sort-of-hack:
You just stop docker daemon and change container config in /var/lib/docker/containers/[container-id]/config.json (sic)
This solution updates the environment variables without the need to delete and re-run the container, having to migrate volumes and remembering parameters to run.
However, this requires a restart of the docker daemon. And, until issue issue 2658 is addressed, this includes a restart of all containers.
To:
set up many env. vars in one step,
prevent exposing them in 'sh' history, like with '-e' option (passing credentials/api tokens!),
you can use
--env-file key_value_file.txt
option:
docker run --env-file key_value_file.txt $INSTANCE_ID
Here's how you can modify a running container to update its environment variables. This assumes you're running on Linux. I tested it with Docker 19.03.8
Live Restore
First, ensure that your Docker daemon is set to leave containers running when it's shut down. Edit your /etc/docker/daemon.json, and add "live-restore": true as a top-level key.
sudo vim /etc/docker/daemon.json
My file looks like this:
{
"default-runtime": "nvidia",
"runtimes": {
"nvidia": {
"path": "nvidia-container-runtime",
"runtimeArgs": []
}
},
"live-restore": true
}
Taken from here.
Get the Container ID
Save the ID of the container you want to edit for easier access to the files.
export CONTAINER_ID=`docker inspect --format="{{.Id}}" <YOUR CONTAINER NAME>`
Edit Container Configuration
Edit the configuration file, go to the "Env" section, and add your key.
sudo vim /var/lib/docker/containers/$CONTAINER_ID/config.v2.json
My file looks like this:
...,"Env":["TEST=1",...
Stop and Start Docker
I found that restarting Docker didn't work, I had to stop and then start Docker with two separate commands.
sudo systemctl stop docker
sudo systemctl start docker
Because of live-restore, your containers should stay up.
Verify That It Worked
docker exec <YOUR CONTAINER NAME> bash -c 'echo $TEST'
Single quotes are important here.
You can also verify that the uptime of your container hasn't changed:
docker ps
You wrote that you do not want to migrate the old volumes. So I assume either the Dockerfile that you used to build the spencercooley/wordpress image has VOLUMEs defined or you specified them on command line with the -v switch.
You could simply start a new container which imports the volumes from the old one with the --volumes-from switch like:
$ docker run --name my-new-wordpress --volumes-from my-wordpress -e VIRTUAL_HOST=domain.com --link my-mysql:mysql -d spencercooley/wordpres
So you will have a fresh container but you do not loose the old data. You do not even need to touch or migrate it.
A well-done container is always stateless. That means its process is supposed to add or modify only files on defined volumes. That can be verified with a simple docker diff <containerId> after the container ran a while.
In that case it is not dangerous when you re-create the container with the same parameters (in your case slightly modified ones). Assuming you create it from exactly the same image from which the old one was created and you re-use the same volumes with the above mentioned switch.
After the new container has started successfully and you verified that everything runs correctly you can delete the old wordpress container. The old volumes are then referred from the new container and will not be deleted.
If you are running the container as a service using docker swarm, you can do:
docker service update --env-add <you environment variable> <service_name>
Also remove using --env-rm
To make sure it's addedd as you wanted, just run:
docker exec -it <container id> env
1. Enter your running container:
sudo docker exec -it <container_name> /bin/bash
2. Run command to all available to user accessing the container and copy them to user running session that needs to run the commands:
printenv | grep -v "no_proxy" >> /etc/environment
3. Stop and Start the container
sudo docker stop <container_name>
sudo docker start <container_name>
Firstly you can set env inside the container the same way as you do on a linux box.
Secondly, you can do it by modifying the config file of your docker container (/var/lib/docker/containers/xxxx/config.v2.json). Note you need restart docker service to take affect. This way you can change some other things like port mapping etc.
here is how to update a docker container config permanently
stop container: docker stop <container name>
edit container config: docker run -it -v /var/lib/docker:/var/lib/docker alpine vi $(docker inspect --format='/var/lib/docker/containers/{{.Id}}/config.v2.json' <container name>)
restart docker
I solve this problem with docker commit after some modifications in the base container, we only need to tag the new image and start that one
docs.docker.com/engine/reference/commandline/commit
docker commit [container-id] [tag]
docker commit b0e71de98cb9 stack-overflow:0.0.1
then you can pass environment vars or file
docker run --env AWS_ACCESS_KEY_ID --env AWS_SECRET_ACCESS_KEY --env AWS_SESSION_TOKEN --env-file env.local -p 8093:8093 stack-overflow:0.0.1
the quick working hack would be:
get into the running container.
docker exec -it <container_name> bash
set env variable,
install vim if not installed in the container
apt-get install vim
vi ~/.profile at the end of the file add export MAPPING_FILENAME=p_07302021
source ~/.profile
check whether it has been set! echo $MAPPING_FILENAME(make sure you should come out of the container.)
Now, you can run whatever you're running outside of the container from inside the container.
Note, in case you're worried that you might lose your work if the current session you logged in gets logged off. you can always use screen even before starting step 1. That way if you logged off by chance of your inside running container session, you can log back in.
After understand that docker run an image constructed with a dockerfile , and the only way to change it is build another image stop everything and run everything again .
So the easy way to "set an environment variable in a running docker container" is read dockerfile [1] (with docker inspect) understand how docker starts [1].
In the example [1] we can see that docker start with /usr/local/bin/docker-php-entrypoint and we could edit it with vi and add one line with export myvar=myvalue since /usr/local/bin/docker-php-entrypoint Posix script .
If you can change dockerfile, you can add a call to a script [2] for example /usr/local/bin/mystart.sh and in that file we can set your environment var.
Of course after change the scripts you need restart the container [3]
[1]
$ docker inspect 011aa33ba92b
[{
. . .
"ContainerConfig": {
"Cmd": [
"php-fpm"
],
"WorkingDir": "/app",
"Entrypoint": [
"docker-php-entrypoint"
],
. . .
}]
[2]
/usr/local/bin/mystart.sh
#!/bin/bash
export VAR1=VAL1
export VAR2=VAL2
your_cmd
[3]
docker restart dev-php (container name)
Hack with editing docker inner configs and then restarting docker daemon was unsuitable for my case.
There is a way to recreate container with new environment settings and use it for some time.
1. Create new image from runnning container:
docker commit my-service
a1b2c3d4e5f6032165497
Docker created new image, and answered with its id. Note, the image doesn't include mounts and networks.
2. Stop and rename original container:
docker stop my-service
docker rename my-service my-service-original
3. Create and start new container with modified environment:
docker run \
-it --rm \
--name my-service \
--network=required-network \
--mount type=bind,source=/host/path,target=/inside/path,readonly \
--env 'MY_NEW_ENV_VAR=blablabla OLD_ENV=zzz' \
a1b2c3d4e5f6032165497
Here, I did the following:
created new temporary container from image built on step 1, that will show its output on terminal, will exit on Ctrl+C, and will be deleted after that
configured its mounts and networks
added my custom environment configuration
4. After you worked with temporary container, press Ctrl+C to stop and remove it, and then return old container back:
docker rename my-service-original my-service
docker start my-service
How to set environment variable in a running docker container as a development environment
Basically you can do like in normal linux, adding export MY_VAR="value" to ~/.bashrc file.
Instructions
Using VScode attach to your running container
Then with VScode open the ~/.bashrc file
Export your variable by adding the code in the end of the file
export MY_VAR="value"
Finally execute .bashrc using source command
source ~/.bashrc
You could set an environment variable to a running Docker container by
docker exec -it -e "your environment Key"="your new value" <container> /bin/bash
Verify it using below command
printenv
This will update your key with the new value provided.
Note: This will get reverted back to old on if docker gets restarted.
Use export VAR=Value
Then type printenv in terminal to validate it is set correctly.