I have a name spaced class..
"CommonCar::RedTrunk"
I need to convert it to an underscored string "common_car_red_trunk", but when I use
"CommonCar::RedTrunk".underscore, I get "common_car/red_trunk" instead.
Is there another method to accomplish what I need?
Solutions:
"CommonCar::RedTrunk".gsub(':', '').underscore
or:
"CommonCar::RedTrunk".sub('::', '').underscore
or:
"CommonCar::RedTrunk".tr(':', '').underscore
Alternate:
Or turn any of these around and do the underscore() first, followed by whatever method you want to use to replace "/" with "_".
Explanation:
While all of these methods look basically the same, there are subtle differences that can be very impactful.
In short:
gsub() – uses a regex to do pattern matching, therefore, it's finding any occurrence of ":" and replacing it with "".
sub() – uses a regex to do pattern matching, similarly to gsub(), with the exception that it's only finding the first occurrence (the "g" in gsub() meaning "global"). This is why when using that method, it was necessary to use "::", otherwise a single ":" would have been left. Keep in mind with this method, it will only work with a single-nested namespace. Meaning "CommonCar::RedTrunk::BigWheels" would have been transformed to "CommonCarRedTrunk::BigWheels".
tr() – uses the string parameters as arrays of single character replacments. In this case, because we're only replacing a single character, it'll work identically to gsub(). However, if you wanted to replace "on" with "EX", for example, gsub("on", "EX") would produce "CommEXCar::RedTrunk" while tr("on", "EX") would produce "CEmmEXCar::RedTruXk".
Docs:
https://apidock.com/ruby/String/gsub
https://apidock.com/ruby/String/sub
https://apidock.com/ruby/String/tr
This is a pure-Ruby solution.
r = /(?<=[a-z])(?=[A-Z])|::/
"CommonCar::RedTrunk".gsub(r, '_').downcase
#=> "common_car_red_trunk"
See (the first form of) String#gsub and String#downcase.
The regular expression can be made self-documenting by writing it in free-spacing mode:
r = /
(?<=[a-z]) # assert that the previous character is lower-case
(?=[A-Z]) # assert that the following character is upper-case
| # or
:: # match '::'
/x # free-spacing regex definition mode
(?<=[a-z]) is a positive lookbehind; (?=[A-Z]) is a positive lookahead.
Note that /(?<=[a-z])(?=[A-Z])/ matches an empty ("zero-width") string. r matches, for example, the empty string between 'Common' and 'Car', because it is preceeded by a lower-case letter and followed by an upper-case letter.
I don't know Rails but I'm guessing you could write
"CommonCar::RedTrunk".delete(':').underscore
Related
I am not very familiar with regex. I am trying to match routes in ruby. I have a situation where I have some /route/:id that can take the 'id' parameter. I would like to match the route to any string with parameters as long as there is no forward slash. So anything like /route/123 should match but anything like /route/subroute/123 should not since there is a forward slash after 'subroute'. This is my current regex pattern that matches the '/routes/' portion and allows any string to take place of the 'id' parameter: \A\/routes\/\z*. This works, but if a forward slash is present in the 'id' portion of the route, the match still succeeds. What can I do to allow any string as the 'id' as long as a forward slash is not present?
This ended up being the pattern that worked for my case:
^\/route(\/[A-Za-z0-9\-\_]*)?$
Since it is a route, I found it better to allow only valid url characters and I use the parentheses (...)? for cases of routes that do not take parameters at all so '/route', '/route/', and '/route/abc' will all work, but '/route/abc/' will not.
In Ruby, ^ marks the start of any line, not string, so instead of ^, you need \A. Same with $, to match a string end position, you need to use \z.
Also, to match a single path subpart (the string between two slashes here) you can use a negated character class [^\/]+ / [^\/]*. If you plan to restrict the chars in the subpart to alphanumeric, hyphen and underscore, you can replace [^\/] with [\w-].
So, you can also use
/\A\/route(?:\/[\w-]*)?\z/
Details:
\A - start of string
\/route - a literal /route string
(?:\/[\w-]*)? - an optional (due to the last ?) non-capturing group that matches an optional sequence of / and then zero or more alphanumeric, underscore (\w) or hyphen chars
\z - end of string.
See the Rubular demo (here, ^ and $ are used for demo purposes only since the input is a single multiline text).
I need a regular expression able to match everything but a string starting with a specific pattern (specifically index.php and what follows, like index.php?id=2342343).
Regex: match everything but:
a string starting with a specific pattern (e.g. any - empty, too - string not starting with foo):
Lookahead-based solution for NFAs:
^(?!foo).*$
^(?!foo)
Negated character class based solution for regex engines not supporting lookarounds:
^(([^f].{2}|.[^o].|.{2}[^o]).*|.{0,2})$
^([^f].{2}|.[^o].|.{2}[^o])|^.{0,2}$
a string ending with a specific pattern (say, no world. at the end):
Lookbehind-based solution:
(?<!world\.)$
^.*(?<!world\.)$
Lookahead solution:
^(?!.*world\.$).*
^(?!.*world\.$)
POSIX workaround:
^(.*([^w].{5}|.[^o].{4}|.{2}[^r].{3}|.{3}[^l].{2}|.{4}[^d].|.{5}[^.])|.{0,5})$
([^w].{5}|.[^o].{4}|.{2}[^r].{3}|.{3}[^l].{2}|.{4}[^d].|.{5}[^.]$|^.{0,5})$
a string containing specific text (say, not match a string having foo):
Lookaround-based solution:
^(?!.*foo)
^(?!.*foo).*$
POSIX workaround:
Use the online regex generator at www.formauri.es/personal/pgimeno/misc/non-match-regex
a string containing specific character (say, avoid matching a string having a | symbol):
^[^|]*$
a string equal to some string (say, not equal to foo):
Lookaround-based:
^(?!foo$)
^(?!foo$).*$
POSIX:
^(.{0,2}|.{4,}|[^f]..|.[^o].|..[^o])$
a sequence of characters:
PCRE (match any text but cat): /cat(*SKIP)(*FAIL)|[^c]*(?:c(?!at)[^c]*)*/i or /cat(*SKIP)(*FAIL)|(?:(?!cat).)+/is
Other engines allowing lookarounds: (cat)|[^c]*(?:c(?!at)[^c]*)* (or (?s)(cat)|(?:(?!cat).)*, or (cat)|[^c]+(?:c(?!at)[^c]*)*|(?:c(?!at)[^c]*)+[^c]*) and then check with language means: if Group 1 matched, it is not what we need, else, grab the match value if not empty
a certain single character or a set of characters:
Use a negated character class: [^a-z]+ (any char other than a lowercase ASCII letter)
Matching any char(s) but |: [^|]+
Demo note: the newline \n is used inside negated character classes in demos to avoid match overflow to the neighboring line(s). They are not necessary when testing individual strings.
Anchor note: In many languages, use \A to define the unambiguous start of string, and \z (in Python, it is \Z, in JavaScript, $ is OK) to define the very end of the string.
Dot note: In many flavors (but not POSIX, TRE, TCL), . matches any char but a newline char. Make sure you use a corresponding DOTALL modifier (/s in PCRE/Boost/.NET/Python/Java and /m in Ruby) for the . to match any char including a newline.
Backslash note: In languages where you have to declare patterns with C strings allowing escape sequences (like \n for a newline), you need to double the backslashes escaping special characters so that the engine could treat them as literal characters (e.g. in Java, world\. will be declared as "world\\.", or use a character class: "world[.]"). Use raw string literals (Python r'\bworld\b'), C# verbatim string literals #"world\.", or slashy strings/regex literal notations like /world\./.
You could use a negative lookahead from the start, e.g., ^(?!foo).*$ shouldn't match anything starting with foo.
You can put a ^ in the beginning of a character set to match anything but those characters.
[^=]*
will match everything but =
Just match /^index\.php/, and then reject whatever matches it.
In Python:
>>> import re
>>> p='^(?!index\.php\?[0-9]+).*$'
>>> s1='index.php?12345'
>>> re.match(p,s1)
>>> s2='index.html?12345'
>>> re.match(p,s2)
<_sre.SRE_Match object at 0xb7d65fa8>
Came across this thread after a long search. I had this problem for multiple searches and replace of some occurrences. But the pattern I used was matching till the end. Example below
import re
text = "start![image]xxx(xx.png) yyy xx![image]xxx(xxx.png) end"
replaced_text = re.sub(r'!\[image\](.*)\(.*\.png\)', '*', text)
print(replaced_text)
gave
start* end
Basically, the regex was matching from the first ![image] to the last .png, swallowing the middle yyy
Used the method posted above https://stackoverflow.com/a/17761124/429476 by Firish to break the match between the occurrence. Here the space is not matched; as the words are separated by space.
replaced_text = re.sub(r'!\[image\]([^ ]*)\([^ ]*\.png\)', '*', text)
and got what I wanted
start* yyy xx* end
I am writing a parse for a script language.
I need to recognize strings, integers and floats.
I successfully recognize strings with the rule:
[a-zA-Z0-9_]+ {return STRING;}
But I have problem recognizing Integers and Floats. These are the (wrong) rules I wrote:
["+"|"-"][1-9]{DIGIT}* { return INTEGER;}
["+"|"-"]["0." | [1-9]{DIGIT}*"."]{DIGIT}+ {return FLOAT;}
How can I fix them?
Furthermore, since a "abc123" is a valid string, how can I make sure that it is recognized as a string and not as the concatenation of a string ("abc") and an Integer ("123") ?
First problem: There's a difference between (...) and [...]. Your regular expressions don't do what you think they do because you're using the wrong punctuation.
Beyond that:
No numeric rule recognizes 0.
Both numeric rules require an explicit sign.
Your STRING rule recognizes integers.
So, to start:
[...] encloses a set of individual characters or character ranges. It matches a single character which is a member of the set.
(...) encloses a regular expression. The parentheses are used for grouping, as in mathematics.
"..." encloses a sequence of individual characters, and matches exactly those characters.
With that in mind, let's look at
["+"|"-"][1-9]{DIGIT}*
The first bracket expression ["+"|"-"] is a set of individual characters or ranges. In this case, the set contains: ", +, " (again, which has no effect because a set contains zero or one instances of each member), |, and the range "-", which is a range whose endpoints are the same character, and consequently only includes that character, ", which is already in the set. In short, that was equivalent to ["+|]. It will match one of those three characters. It requires one of those three characters, in fact.
The second bracket expression [1-9] matches one character in the range 1-9, so it probably does what you expected. Again, it matches exactly one character.
Finally, {DIGIT} matches the expansion of the name DIGIT. I'll assume that you have the definition:
DIGIT [0-9]
somewhere in your definitions section. (In passing, I note that you could have just used the character class [:digit:], which would have been unambiguous, and you would not have needed to define it.) It's followed by a *, which means that it will match zero or more repetitions of the {DIGIT} definition.
Now, an example of a string which matches that pattern:
|42
And some examples of strings which don't match that pattern:
-7 # The pattern must start with |, + or "
42 # Again, the pattern must start with |, + or "
+0 # The character following the + must be in the range [0-9]
Similarly, your float pattern, once the [...] expressions are simplified, becomes (writing out the individual pieces one per line, to make it more obvious):
["+|] # i.e. the set " + |
["0.|[1-9] # i.e. the set " 0 | [ 1 2 3 4 5 6 7 8 9
{DIGIT}* # Any number of digits
"." # A single period
] # A single ]
{DIGIT}+ # one or more digits
So here's a possible match:
"..]3
I'll skip over writing out the solution because I think you'll benefit more from doing it yourself.
Now, the other issues:
Some rule should match 0. If you don't want to allow leading zeros, you'll need to just a it as a separate rule.
Use the optional operator (?) to indicate that the preceding object is optional. eg. "foo"? matches either the three characters f, o, o (in order) or matches the empty string. You can use that to make the sign optional.
The problem is not the matching of abc123, as in your question. (F)lex always gives you the longest possible match, and the only rule which could match the starting character a is the string rule, so it will allow the string rule to continue as long as it can. It will always match all of abc123. However, it will also match 123, which you would probably prefer to be matched by your numeric rule. Here, the other (f)lex matching criterion comes into play: when there are two or more rules which could match exactly the same string, and none of the rules can match a longer string, (f)lex chooses the first rule in the file. So if you want to give numbers priority over strings, you have to put the number rule earlier in your (f)lex file than the string rule.
I hope that gives you some ideas about how to fix things.
Suppose I have string variables like following:
s1="10$"
s2="10$ I am a student"
s3="10$Good"
s4="10$ Nice weekend!"
As you see above, s2 and s4 have white space(s) after 10$ .
Generally, I would like to have a way to check if a string start with 10$ and have white-space(s) after 10$ . For example, The rule should find s2 and s4 in my above case. how to define such rule to check if a string start with '10$' and have white space(s) after?
What I mean is something like s2.RULE? should return true or false to tell if it is the matched string.
---------- update -------------------
please also tell the solution if 10# is used instead of 10$
You can do this using Regular Expressions (Ruby has Perl-style regular expressions, to be exact).
# For ease of demonstration, I've moved your strings into an array
strings = [
"10$",
"10$ I am a student",
"10$Good",
"10$ Nice weekend!"
]
p strings.find_all { |s| s =~ /\A10\$[ \t]+/ }
The regular expression breaks down like this:
The / at the beginning and the end tell Ruby that everything in between is part of the regular expression
\A matches the beginning of a string
The 10 is matched verbatim
\$ means to match a $ verbatim. We need to escape it since $ has a special meaning in regular expressions.
[ \t]+ means "match at least one blank and/or tab"
So this regular expressions says "Match every string that starts with 10$ followed by at least one blank or tab character". Using the =~ you can test strings in Ruby against this expression. =~ will return a non-nil value, which evaluates to true if used in a conditional like if.
Edit: Updated white space matching as per Asmageddon's suggestion.
this works:
"10$ " =~ /^10\$ +/
and returns either nil when false or 0 when true. Thanks to Ruby's rule, you can use it directly.
Use a regular expression like this one:
/10\$\s+/
EDIT
If you use =~ for matching, note that
The =~ operator returns the character position in the string of the
start of the match
So it might return 0 to denote a match. Only a return of nil means no match.
See for example http://www.regular-expressions.info/ruby.html on a regular expression tutorial for ruby.
If you want to proceed to cases with $ and # then try this regular expression:
/^10[\$#] +/
I have to validate username in my app so that it cannot contain two consecutive period symbols. I tried the following.
username.match(/(..)/)
but found out that this matches "a." and "a..". I expected to get nil as the output of the match operation for input "a.". Is my approach right ?
You need to put a \ in front of the periods, because period is a reserved character for "any character except newline".
So try:
username.match(/(\.\.)/)
Short answer
You can use something like this (see on rubular.com):
username.match(/\.{2}/)
The . is escaped by preceding with a backslash, {2} is exact repetition specifier, and the brackets are removed since capturing is not required in this case.
On metacharacters and escaping
The dot, as a pattern metacharacter, matches (almost) any character. To match a literal period, you have at least two options:
Escape the dot as \.
Match it as a character class singleton [.]
Other metacharacters that may need escaping are | (alternation), +/*/?/{/} (repetition), [/] (character class), ^/$ (anchors), (/) (grouping), and of course \ itself.
References
regular-expressions.info/Literals and metacharacters, Dot: ., Character Class: […], Anchors: ^$, Repetition: *+?{…}, Alternation: |, Optional: ?, Grouping: (…)
On finite repetition
To match two literal periods, you can use e.g. \.\. or [.][.], i.e. a simple concatenation. You can also use the repetition construct, e.g. \.{2} or [.]{2}.
The finite repetition specifier also allows you write something like x{3,5} to match at least 3 but at most 5 x.
Note that repetition has a higher precedence that concatenation, so ha{3} doesn't match "hahaha"; it matches "haaa" instead. You can use grouping like (ha){3} to match "hahaha".
On grouping
Grouping (…) captures the string it matches, which can be useful when you want to capture a match made by a subpattern, or if you want to use it as a backreference in the other parts of the pattern.
If you don't need this functionality, then a non-capturing option is (?:…). Thus something like (?:ha){3} still matches "hahaha" like before, but without creating a capturing group.
If you don't actually need the grouping aspect, then you can just leave out the brackets altogether.