I just wanted to instantly be 5 values up above my head from where I am in the world, but this code is also pushing me (X and Z) to another Same Remembered Location. do you see anything wrong with the code?
function Behavior:Awake()
local pos = self.gameObject.transform:GetLocalPosition()
self.posy = pos.y
if CS.Input.WasButtonJustPressed("sobe1") then
self.gameObject.transform:SetPosition( Vector3:New( self.posy + 5 ) )
your Behavior:Awake() function is being called, probably when you get out of bed, or whenever that event is triggered.
Those self.posx .posy & .posz values get stored in your character table, until you later access them from within your Behavior:Update() function.
You need to just call :getLocalPosition() at the moment you need those values. So try getting rid of the :Awake() portion, and combine those coordinates into your update vector routine.
function Behavior:Update()
if CS.Input.WasButtonJustPressed('sobe1') then
local pos = self.gameObject.transform:GetLocalPosition()
self.gameObject.transform:SetPosition( Vector3:New( pos.x, pos.y +4.78, pos.z ) )
end -- 'sobe1'
end -- Update()
Related
Im trying to generate a random map using a matrix but I dont really know how. Here is the
function for the matrix. wMap and hMap are the width and height, and mapSprites is a table containing some ground sprites. Also how can I draw the matrix? Im sorry if this is too much of a question, but Im really in need for some help
function buildMap(wMap, hMap)
for i = 1, wMap do
mt[i] = {}
for j = 1, hMap do
mt[i][j] = math.random(mapSprites)
end
end
end
Generating a random map in any programming language will utilize two core concepts: The language's random function and nested for loops, two for the case of a map/matrix/2d array.
The first problem, is you may or may not have mt initialized outside the function. This function assumes the variable exists outside of the function and each time the function is called it will overwrite mt (or initialize it for the first function call) with random values.
The second problem, the width, wMap, and height, hMap, of the map are in the wrong order, as maps/matrices/2d arrays first iterate over the height (y dimension) and then the width (x dimension).
The last problem, mapSpripes also has to be declared outside the function (which is not clear with your code snippet), which will be the highest possible value the random function can generate. You can read more about math.random here: http://lua-users.org/wiki/MathLibraryTutorial
Consider this function I wrote that makes those adjustments as well as has some additional variables for the minimum and maximum random value. Of course, you can remove these to have it fit your intended purposes.
function buildMap(wMap, hMap)
local minRand = 10
local maxRand = 20
for y = 1, hMap do
matrix[y] = {}
for x = 1, wMap do
matrix[y][x] = math.random(minRand, maxRand)
end
end
end
I suggest you use this function as inspiration for your future iteratins. You can make minRand and maxRand parameters or make matrix a returned value rather than manipulating an already declared matrix value outside of the function.
Best of luck!
EDIT:
Regarding your second question. Look back at the section I wrote about nested for loops. This will be crucial to "drawing" your map. I believe you have the building blocks to resolve this issue yourself as there isn't enough context provided about what "drawing" looks like. Here is a fundamentally similiar function, based on my previous function, on printing the map:
function printMap(matrix)
for i = 1, #matrix do
for j = 1, #matrix[i] do
io.write(matrix[i][j] .. " ")
end
io.write("\n")
end
end
For choosing random sprite, I recommend you to create a table of sprites and then save index of sprite in matrix. Then you can draw it in same loop, but now, you will iterate over matrix and draw sprite based on sprite index saved in matrix in position given by matrix position (x and y in loop) times size of sprite.
local sprites, mt = {}, {}
local spriteWidth, spriteHeight = 16, 16 -- Width and height of sprites
function buildMap(wMap, hMap)
mt = {}
for i = 1, wMap do
mt[i] = {}
for j = 1, hMap do
mt[i][j] = math.random(#sprites) -- We choose random sprite index (#sprites is length of sprites table)
end
end
end
function love.load()
sprites = {
love.graphics.newImage('sprite1.png'),
love.graphics.newImage('sprite2.png'),
-- ...
}
buildMap()
end
function love.draw()
for y, row in ipairs(mt) do
for x, spriteIndex in ipairs(row) do
-- x - 1, because we want to start at 0, 0, but lua table indexing starts at 1
love.graphics.draw(sprites[spriteIndex], (x - 1) * spriteWidth, (y - 1) * spriteHeight)
end
end
end
Im quite new to Lua so please pardon my ignorance but i cannot find the solution to my problem.
Whats going on
Im currently trying to move objects from A to B and once object is at B to restart at A and again move to B in a continuous cycle.
local function moveLeft(obj)
print("moving left")
local function resetObj(obj)
transition.to (obj,{ time = 10, x = obj.x + screenWidth + obj.width, onComplete=moveLeft })
end
transition.moveBy (obj,{ time = 3000, x = -screenWidth -obj.width, onComplete=resetObj })
end
and then called using
for idx1 = 1, 8 do
enemyRed = display.newImage("Images/enemyRed.png")
-- 7. Apply physics engine to the enemys, set density, friction, bounce and radius
physics.addBody(enemyRed, "dynamic", {density=0.1, friction=0.0, bounce=0, radius=9.5});
local xPositionEnemy = math.random() + math.random(1, screenWidth)
enemyRed.x = xPositionEnemy;
enemyRed.y = yPosition;
enemyRed.name = "enemyRed"..idx
moveLeft(enemyRed);
end
This is great and all objects are moving from A to B
Problem / issue
The issue here is that the onComplete is not called until ALL objects named "enemyRed" are at point B.
Question
What i want is for each individual object named "enemyRed" to reset to original position A once its reached its destination.
I can't answer the problem/issue because it is not clear (I added a comment). Re the question, you should probably add a A position field to each object, this way you can easily return to it (stylistic note: this is Lua, not c, you don't need semicolons). So In your loop do this:
enemyRed.x = xPositionEnemy
enemyRed.startPos = xPositionEnemy
then in your resetObj do this:
local function moveLeft(obj)
local function resetObj()
print("moving back")
transition.to (obj,
{ time = 10, x = obj.startPos, onComplete=function() moveLeft(obj) end })
end
print("moving left")
transition.moveBy (obj,
{ time = 3000, x = -screenWidth - obj.width, onComplete=resetObj })
end
The above also shows that when calling your moveLeft from the resetObj function, you have to give the obj to the moveLeft otherwise obj will be nil. The resetObjdoes not needobj` parameter since it is an upvalue already.
I have a model called door
Inside I have a BoolValue named Open
I have a model called Top that has all of the door blocks named Work Mabey Comeon and Proboblynot
And I have Block that when touched is supposed to make Top move up
Directly inside door I have this script
door = script.Parent
open = door.Open
Top = door.Top
opener = 18
speed = 100
steps = speed
startl = Top.CFrame
function MoveDoorToCFrame(cfrm,dr)
dr.Work.CFrame = cfrm
dr.Mabey.CFrame = dr.Work.CFrame * CFrame.new(0,-7.2,0)
dr.Comeon.CFrame = dr.Work.CFrame * CFrame.new(0,10.8,0)
dr.Problynot.CFrame = dr.Work.CFrame * CFrame.new(0,10.8,0)
end
function Update()
if speed/steps < 0.5 then
calc = 1-math.cos(math.rad((-90/speed)*steps*2))
else
calc = 1+math.sin(math.rad((90/speed)*((speed/2)-steps)*2))
end
MoveDoorToCFrame(startl * CFrame.new(0,(calc/2)*opener,0),Top)
end
Update()
while true do
wait()
if not open.Value and steps < speed then
steps = steps + 1
Update()
elseif open.Value and steps > 0 then
steps = steps - 1
Update()
end
end
Inside the button that is supposed to activate on touch I have
script.Parent.Touched:connect(function()
script.Parent.Parent.Open.Value = not script.Parent.Parent.Open.Value
end)
script.Parent.Parent.Open.Changed:connect(Update)
Update()
If you know how to fix this it would be gladly appreciated.
Update November 2015:
Using PrimaryPart
Since writing this post, ROBLOX has changed a lot in regards to the API. To move a model like requested, you should set the PrimaryPart property of the model to a central part inside the model. This will act as the origin for the model's movements.
You can then use model:SetPrimaryPartCFrame(cframe) to set the CFrame of the model. You can also retrieve this property by using model:GetPrimaryPartCFrame(), although I believe that is just a shortcut method for model.PrimaryPart.CFrame.
In code, it would look like this:
-- Set PrimaryPart:
MODEL.PrimaryPart = MODEL.SomeCentralPart
...
-- CFrame movement:
local movement = CFrame.new(0, 10, 0)
-- Move the model:
MODEL:SetPrimaryPartCFrame(MODEL:GetPrimaryPartCFrame() * movement)
Option A: Use Model's methods
I think you are making this much more difficult than it needs to be. Whenever you run into an issue like this, be sure to check the current APIs provided. The ROBLOX Model object contains a nifty method called 'TranslateBy' which takes a Vector3 argument to translate the model.
Using MODEL:TranslateBy(Vector3) is similar to moving a model via CFrame, since it ignores collisions.
Another alternative is MODEL:MoveTo(Vector3) which moves a whole model to the given Vector3 world position. The downside to this is that it does collide.
One way to get the same MoveTo effect but without collisions can be done with the TranslateBy method:
MODEL:TranslateBy(Vector3Position - MODEL:GetModelCFrame().p)
Option B: Write a custom function to manipulate the model's CFrame
Another alternative would be to manipulate the whole model's CFrame entirely. To do this, you can write a clever function that will move a whole model relative to an 'origin' point. This is similar to moving shapes on a grid given their points and an origin, except in three dimensions. Using ROBLOX's built-in functions, this is much easier though.
A good way to do this would be to write a function that lets you actually assign a CFrame value to a whole model. Another way would be to allow a translation via CFrame too.
Here's an example:
function ModelCFrameAPI(model)
local parts = {} -- Hold all BasePart objects
local cf = {} -- API for CFrame manipulation
do
-- Recurse to get all parts:
local function Scan(parent)
for k,v in pairs(parent:GetChildren()) do
if (v:IsA("BasePart")) then
table.insert(parts, v)
end
Scan(v)
end
end
Scan(model)
end
-- Set the model's CFrame
-- NOTE: 'GetModelCFrame()' will return the model's CFrame
-- based on the given PrimaryPart. If no PrimaryPart is provided
-- (which by default is true), ROBLOX will try to determine
-- the center CFrame of the model and return that.
function cf:SetCFrame(cf)
local originInverse = model:GetModelCFrame():inverse()
for _,v in pairs(parts) do
v.CFrame = (cf * (originInverse * v.CFrame))
end
end
-- Translate the model's CFrame
function cf:TranslateCFrame(deltaCf)
local cf = (model:GetModelCFrame() * deltaCf)
self:SetCFrame(cf)
end
return cf
end
-- Usage:
local myModel = game.Workspace.SOME_MODEL
local myModelCF = ModelCFrameAPI(myModel)
-- Move to 10,10,10 and rotate Y-axis by 180 degrees:
myModelCF:SetCFrame(CFrame.new(10, 10, 10) * CFrame.Angles(0, math.pi, 0))
-- Translate by 30,0,-10 and rotate Y-axis by 90 degrees
myModelCF:TranslateCFrame(CFrame.new(30, 0, -10) * CFrame.Angles(0, math.pi/2, 0))
This might be hard.
You might want to look to free models for this one unless the people above get it to work.
I, however, do have a script to move a model:
game.Workspace.Model:MoveTo(Vector3.new(0,0,0))
Your code indeed needs fixing.
You should NOT use a never-ending loop to make your stuff work (unless that is the only way).
You should rather base actions on events.
Consider to use this:
Structure:
Door [Model]
DoorScript [Script]
Button [Part]
DoorOpen [BoolValue]
Top [Model]
Mabey [Part]
Comeon [Part]
Problynot [Part]
DoorScript:
local Model = script.Parent
local Door = Model.Top
local Button = Model.Button
local DoorOpen = Model.DoorOpen
local Offset = 0
local ToOffset = 100
local Direction = 1
local StepLength = 0.1
local Moving = false
function StartMoving()
if Moving then return end
Moving = true
while (DoorOpen.Value and Offset ~= ToOffset) or (not DoorOpen.Value and Offset ~= 0) do
local Change = Offset
Offset = math.max(0,math.min(ToOffset,Offset + StepLength * (DoorOpen.Value and 1 or -1)))
Change = Offset - Change
Top:TranslateBy(Vector3.new(0,Change,0))
wait()
end
Moving = false
end
StartMoving()
DoorOpen.Changed:connect(StartMoving)
local Debounce = false
Button.Touched:connect(function()
if Debounce then return end
Debounce = true
DoorOpen.Value = not DoorOpen.Value
wait(4)
Debounce = false
end)
You might want to adjust the speed tho.
This can be used to move models, try adding something like this into your code. It's more dynamic.
a = Workspace.Model
for i=0.1,40 do
for i,v in pairs(a:getChildren()) do
if v:IsA("Part") then
v.CFrame = CFrame.new(v.CFrame + Vector3.new(0,0.1,0))
else print("Not a part")
end
end
end
I am attempting to add/remove objects from the physics engine (addBody() and removeBody()) in an app I am working on. The app I am working on is modular so the issue is in one of two files.
The objects file (TransmitterObject) or the main file (main):
This is the relevant code for both:
main.lua
local physics = require("physics")
physics.start()
physics.setGravity(0,0)
physics.setDrawMode( "debug" )
local TransmitterObject = require("TransmitterObject")
function updateGame(event)
if(ITERATIONS % 100 == 0) then
tran1:activate() --create new physics object here
end
ITERATIONS = ITERATIONS + 1
--print(ITERATIONS)
end
Runtime:addEventListener("enterFrame", updateGame)
TransmitterObject.lua
function transmitter.new(props) --constructor
Transmitter =
{
x = props.x,
y = props.y,
receivers = props.receivers
}
return setmetatable( Transmitter, transmitter_mt )
end
function transmitter:activate()
local group = math.random(1, #self.receivers)
local receiver = math.random(1,#self.receivers[group])
local x , y = self.receivers[group][receiver][1], self.receivers[group][receiver][2]
local d = math.sqrt(math.pow((self.x-x),2) + math.pow((self.y-y),2))
local dx = math.abs(self.x - x)
local angle = math.deg(math.acos(dx/d))
local beam = display.newRect(self.x,self.y, d, 10)
beam:setReferencePoint(display.TopLeftReferencePoint)
beam.rotation = 180 + angle
beam:setFillColor(0,255,0)
beam.alpha = 0
local function add(event)
physics.addBody(beam, "static")
end
local function delete(event)
physics.removeBody(beam)
end
transition.to( beam, { time=1000, alpha=1.0, onComplete=add } )
transition.to( beam, { time=1000, delay=2500, alpha=0, onComplete=delete})
end
Now let me try to describe the issue a little better. basically every 100th time that 'enterFrame' fires I tell the transmitter object (tran1) to call its function 'activate'
which then preforms some basic math to get coordinates. Then it creates a rectangle (beam) using the calculated information and sets some properties. That is all basic stuff. Next I tell it to transition from not visible (alpha = 0) to visible over the span of 1 second. When does it is to call the function 'add' which adds the object to the physics engine. Likewise with the next line where it removes the objects.
That being said, when i set physics.setDrawMode( "debug" ) the beam object appears as a static body, but does not accept collisions. Does anyone know why the above code would not accept collisions for the beam object?
Keep in mind I have other objects that do work properly within the physics engine.
Wow, I'm answering super late!
On collisions, modifying bodies aren't supported.
What I propose you is to create a new function,
local function addBody ( event )
physics.addBody(ball, "static")
end
and in your collision event you have to add this,
timer.performWithDelay(500, addBody)
The only thing that may cause some problems it's the delay, but as the collision doesn't take too much time it should be ok.
Sorry for this necroposting,
It's just to help other people that may have that problem,
Fannick
Apologies for the incredibly noob question, but I'm new to Lua, very very rusty at any code, stuck and can't find the solution!
I'm creating a series of random images on screen using:
for count = 1, 6 do
r = math.random ( 1, 5 )
mpart[count] = display.newImage ("mpart" .. r .. ".png")
mpart[count].y = 680
mpart[count].x = x
mpart[count].spawnednew = false
x = x + 170
mpart[count]:addEventListener ("touch", onTouch)
end
How do I know which object is being touched/moved in the function "onTouch", and how do I add a property to it, e.g.
mpart[1].spawnednew == true
Your onTouch function should have an event parameter passed in. The touched image can then be found by in event.target.
Well first off, lins is spot on about how to reference the touched object: the 'event' parameter of the listener function includes the value 'event.target'
As for adding new data to the touched object, that's as simple as 'event.target.moved = true' and now the object has data at object.moved