Can a docker container 'go to sleep'? [duplicate] - docker

I have some containers which all of them have the always restart value in the docker-compose file like this:
version: "3.7"
services:
container:
image: ghost:latest
container_name: some_container
restart: always
depends_on:
- ...
ports:
- ...
...
As soon as the OS (Flatcar Linux / CoreOS) has updated itself none of the containers restart. But if I just do $ sudo docker ps all of the containers starts at once. Whats up with that and how do I fix it so my containers automatically restarts after an update?
EDIT:
Not sure what is unclear about my question, restart: always is turned on. Unless I'm missing some vital thing in the documentation, this command should restart the container even if the docker daemon is restarted (after an os reboot).
Copy of one my comments from below:
Ok, so help me out here. As you can see in my question, I have
restart: always turned on. All these containers are started
successfully and are running well. Then the OS updates itself
automatically and restarts itself. After this restart the docker
daemon is restarted. But for some reasons the containers I had running
WITH RESTART: ALWAYS turned on DOES NOT START. If I enter my server
at this moment, type sudo docker ps to list my running containers,
suddenly all containers are booted up and I see the list. So why
wasn't the containers started, even though the daemon is running?

From the comments it appears the docker service was not configured to automatically start on boot. Docker is a client server app, and the server runs from systemd with a separate service for the docker socket used by the client to talk to the server. Therefore it's possible for any call with the docker command to cause the server to get launched by hitting the docker socket.
The service state in systemd can be checked with:
systemctl status docker
or you may want to check:
systemctl is-enabled docker
It can be manually started with:
systemctl start docker
And it can be enabled to start with:
systemctl enable docker
All of the above commands need to be run as root.

This requires the Docker service to get started on boot instead of using the default socket activation that starts on-demand like you decribed with execution of "docker ps"
Here is the required Container Linux Config to enable the Docker service while disabling socket activation:
systemd:
units:
# Ensure docker starts automatically instead of being socket-activated
- name: docker.socket
enabled: false
- name: docker.service
enabled: true

always Always restart the container if it stops. If it is manually stopped, it is restarted only when the Docker daemon restarts, or the container itself is manually restarted.
unless-stopped Similar to always, except that when the container is stopped (manually or otherwise), it is not restarted even after the Docker daemon restarts.
If you had an already running container that you wanted to change the restart policy for, you could use the docker update command to change that, and the below command will ensure all currently running containers will be restarted unless stopped
$ docker update --restart unless-stopped $(docker ps -q)
NOTE: Keep the following in mind when using restart policies
A restart policy only takes effect after a container starts successfully. In this case, starting successfully means that the container is up for at least 10 seconds and Docker has started monitoring it. This prevents a container that does not start at all from going into a restart loop.
If you manually stop a container, its restart policy is ignored until the Docker daemon restarts, or the container is manually restarted. This is another attempt to prevent a restart loop.
Restart policies only apply to containers. Restart policies for swarm services are configured differently
Documentation

If the docker container has been created before, it's [restart policy][1] may not be updated automatically by changing it in the docker compose YAML file.
If you change Restart Policy in the YAML file:
# cat docker-compose.yml
version: "3"
services:
<your-service>:
restart: always
You can see the container details in which RestartPolicy has old value yet:
# docker inspect <your-container> | fgrep -i restart -A 5
"RestartCount": 0,
--
"RestartPolicy": {
"Name": "",
Name is the Restart Policy name! and has no value that means no restart policy is set and the default value [no][1] is used.
So you may not only need to update the Restart Policy in the file, but also update pre created container manually:
# docker update <your-container> --restart always
So new value is changed:
# docker inspect <your-container> | fgrep -i restart -A 5
"RestartCount": 0,
--
"RestartPolicy": {
"Name": "always",
"MaximumRetryCount": 0
},
Just this :(
[1]: https://docs.docker.com/config/containers/start-containers-automatically/

It's container restart policy. restart: always restart the container if it stops. If it is manually stopped, it is restarted only when Docker daemon restarts or the container itself is manually restarted.Please check this link restart_policy.

Related

Containers not restarted after update with restart always in docker-compose.yml

I have some containers which all of them have the always restart value in the docker-compose file like this:
version: "3.7"
services:
container:
image: ghost:latest
container_name: some_container
restart: always
depends_on:
- ...
ports:
- ...
...
As soon as the OS (Flatcar Linux / CoreOS) has updated itself none of the containers restart. But if I just do $ sudo docker ps all of the containers starts at once. Whats up with that and how do I fix it so my containers automatically restarts after an update?
EDIT:
Not sure what is unclear about my question, restart: always is turned on. Unless I'm missing some vital thing in the documentation, this command should restart the container even if the docker daemon is restarted (after an os reboot).
Copy of one my comments from below:
Ok, so help me out here. As you can see in my question, I have
restart: always turned on. All these containers are started
successfully and are running well. Then the OS updates itself
automatically and restarts itself. After this restart the docker
daemon is restarted. But for some reasons the containers I had running
WITH RESTART: ALWAYS turned on DOES NOT START. If I enter my server
at this moment, type sudo docker ps to list my running containers,
suddenly all containers are booted up and I see the list. So why
wasn't the containers started, even though the daemon is running?
From the comments it appears the docker service was not configured to automatically start on boot. Docker is a client server app, and the server runs from systemd with a separate service for the docker socket used by the client to talk to the server. Therefore it's possible for any call with the docker command to cause the server to get launched by hitting the docker socket.
The service state in systemd can be checked with:
systemctl status docker
or you may want to check:
systemctl is-enabled docker
It can be manually started with:
systemctl start docker
And it can be enabled to start with:
systemctl enable docker
All of the above commands need to be run as root.
This requires the Docker service to get started on boot instead of using the default socket activation that starts on-demand like you decribed with execution of "docker ps"
Here is the required Container Linux Config to enable the Docker service while disabling socket activation:
systemd:
units:
# Ensure docker starts automatically instead of being socket-activated
- name: docker.socket
enabled: false
- name: docker.service
enabled: true
always Always restart the container if it stops. If it is manually stopped, it is restarted only when the Docker daemon restarts, or the container itself is manually restarted.
unless-stopped Similar to always, except that when the container is stopped (manually or otherwise), it is not restarted even after the Docker daemon restarts.
If you had an already running container that you wanted to change the restart policy for, you could use the docker update command to change that, and the below command will ensure all currently running containers will be restarted unless stopped
$ docker update --restart unless-stopped $(docker ps -q)
NOTE: Keep the following in mind when using restart policies
A restart policy only takes effect after a container starts successfully. In this case, starting successfully means that the container is up for at least 10 seconds and Docker has started monitoring it. This prevents a container that does not start at all from going into a restart loop.
If you manually stop a container, its restart policy is ignored until the Docker daemon restarts, or the container is manually restarted. This is another attempt to prevent a restart loop.
Restart policies only apply to containers. Restart policies for swarm services are configured differently
Documentation
If the docker container has been created before, it's [restart policy][1] may not be updated automatically by changing it in the docker compose YAML file.
If you change Restart Policy in the YAML file:
# cat docker-compose.yml
version: "3"
services:
<your-service>:
restart: always
You can see the container details in which RestartPolicy has old value yet:
# docker inspect <your-container> | fgrep -i restart -A 5
"RestartCount": 0,
--
"RestartPolicy": {
"Name": "",
Name is the Restart Policy name! and has no value that means no restart policy is set and the default value [no][1] is used.
So you may not only need to update the Restart Policy in the file, but also update pre created container manually:
# docker update <your-container> --restart always
So new value is changed:
# docker inspect <your-container> | fgrep -i restart -A 5
"RestartCount": 0,
--
"RestartPolicy": {
"Name": "always",
"MaximumRetryCount": 0
},
Just this :(
[1]: https://docs.docker.com/config/containers/start-containers-automatically/
It's container restart policy. restart: always restart the container if it stops. If it is manually stopped, it is restarted only when Docker daemon restarts or the container itself is manually restarted.Please check this link restart_policy.

Difference in docker restart policy between on-failure and unless-stopped?

I have read the docker-compose documentation about restart policy of containers,
However I failed to understand the difference between on-failure and unless-stopped.
When will I use one over the other? In which situations a certain policy will lead to start a container and the other policy not?
on-failure will issue a restart if the exit code indicated a failure, whereas unless-stopped behaves like always and will keep an instance running unless the container is stopped.
You can try with the hello-world to see the difference.
docker run --restart on-failure hello-world will run once and exit successfully, and running a subsequent docker ps will indicate no currently running instances of the container.
However, docker run --restart unless-stopped hello-world will restart the container even if it successfully exits, so subsequently running docker ps will show you a restarting instance until you stop the container.
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
4d498ebd13a6 hello-world "/hello" 2 seconds ago Restarting (0) Less than a second ago modest_keldysh
Docker restart policies are there to keep containers active in all possible downfalls, we can leverage it in multiple ways as an example if we have a web server running on a container and have to keep it active even on bad request we can use unless-stopped flag, it will keep the server up and running till we stopped it manually.
Restart flag can be any one of these :-
"no" :- it is the default value, and it will never restart the container.
on-failure :- it will restart the container whenever it encounters an error, or say, whenever the process running inside the container exit with non-zero exit code. Exit code :- 0 means no error, we terminated the process intentionally, but any non-zero value is an error.
always :- as the name, it will always restart the container, no matter whatever be the exit code is. Also, it will restart the container even when we manually stopped it but for that we need to restart the docker daemon.
unless-stopped :- it is similar to the always flag the only difference is once the container is stopped manually it will not restart automatically even after restarting the docker daemon, until we start the container manually again.
The difference between unless-stopped and on-failure is the first will always restart until we stopped it manually no matter whatever be the exit code will be and another will only restart the container on real failure, i.e. exit code = non-zero.
Once the container is stopped its restart flags are ignored, this is one way to overcome from restarting loop. That's why in the case of always flag once we stopped it manually the container will not restart till we restart the docker daemon.
You can easily test all of these flags by creating a simple redis-server:
docker run -d --restart=always --name redis-server redis # start redis image
docker container ls # test the status
docker stop redis-server # stop the container manually
docker container ls # test the status again, got the redis-server did not restarted
sudo service docker restart # restart the docker daemon
# test the status again will find the container is again up and running
# try the same steps by changing the restart flag with *unless-stopped*
docker update --restart=unless-stopped redis-server # will update the restart flag of running container.

How to restore containers listed in docker ps?

Since a couple of days docker ps displays nothing anymore. I might be the source due to my attempts gaining space using docker system prune -a
I'm able to restart all services via docker restart $(docker ps -a -q) though
only for the current boot. After reboot I have to repeat the manual restart.
Can't see any entries searching for fail|warn|error using journalctl -b | grep docker
Offtopic: Despite being able to restart as explained above, I can't use the services properly anymore e.g. hassio homeassistant webui
You might have to use a process manager like systemd to specify containers to start when you boot your machine. Docker Compose might help you start a group of services you need. Depending on your process manager, you can add a service entry so it will start your services when booting up. This article and this article have a few good examples of how to do this with systemd.
You could also add a restart policy, though this applies to running containers and won't persist when you reboot. You can do this in the docker command: docker run --restart=always or in a docker-compose.yml file suggested in this answer:
version: '2'
services:
web:
image: apache
restart: always

docker-compose: how to keep showing logs in 'follow' mode even when container is down?

If you run docker-compose logs -f service in one terminal and try to restart service in other, then logging will be stopped and you will need to start dkc logs again. How to keep dkc logs running?
The only solution I've found so far is to run additional noop service which will not allow dkc logs to shut down. If this is the only solution then do you have any suggestion for simplest noop service which already exists on docker hub?
My workaround:
add new noop service to the docker-compose.override.yml (I picked redis because it was already installed and is quite lightweight):
services:
noop:
image: redis:5-alpine
run docker-compose logs -f service noop instead of with just service.
run docker-compose stop/restart service. logs process will be kept alive by noop service.
Con:
extra stuff to run
cannot use dkc stop and dkc restart without specifying the service
Maybe some information about what you are logging. For example on nginx or php containers we simply move logfiles outside of container just using volume to mount them to host machine, then you can parse them as you want.
volumes:
- /var/log/mysql/error_service_xy.log:/var/log/mysql/error.log

Docker - what does `docker run --restart always` actually do?

Although it seems like the --restart flag is simple and straightforward, I came up with a number of questions when experimenting with it:
With respect to ENTRYPOINT definitions - what are the actual defined semantics during restart?
If I exec into the container (I am on a DDC) and kill -9 the process, it restarts, but if I do docker kill it does not. Why?
How does restart interact with Shared Data Containers / Named Volumes?
Restart policies
Using the --restart flag on Docker run you can specify a restart policy for how a container should or should not be restarted on exit.
When a restart policy is active on a container, it will be shown as either Up or Restarting in docker ps. It can also be useful to use docker events to see the restart policy in effect.
docker run --always
Always restart the container regardless of the exit status. When you
specify always, the Docker daemon will try to restart the container
indefinitely. The container will also always start on daemon startup,
regardless of the current state of the container.
I recommend you this documentation about restart-policies
Documentation - Restart policies
Update Docker v19.03
Restart policies (--restart)
Use Docker’s --restart to specify a container’s restart policy. A restart policy > controls whether the Docker daemon restarts a container after exit. Docker supports the following restart policies:
always Always restart the container regardless of the exit status. When you specify always, the Docker daemon will try to restart the container indefinitely. The container will also always start on daemon startup, regardless of the current state of the container.
$ docker run --restart=always redis
Documentation - Restart policies
To configure the restart policy for a container, use the --restart flag when using the docker run command. The value of the --restart flag can be any of the following:
no Do not automatically restart the container. (the default)
on-failure Restart the container if it exits due to an error, which
manifests as a non-zero exit code.
always Always restart the container if it stops. If it is manually
stopped, it is restarted only when Docker daemon restarts or the
container itself is manually restarted.
unless-stopped Similar to always, except that when the container is
stopped (manually or otherwise), it is not restarted even after Docker
daemon restarts.
The following example starts a Redis container and configures it to always restart unless it is explicitly stopped or Docker is restarted.
$ docker run -d --restart unless-stopped redis
This command changes the restart policy for an already running container named redis.
$ docker update --restart unless-stopped redis
And this command will ensure all currently running containers will be restarted unless stopped.
$ docker update --restart unless-stopped $(docker ps -q)
Restart policy details
Keep the following in mind when using restart policies:
A restart policy only takes effect after a container starts successfully. In this case, starting successfully means that the container is up for at least 10 seconds and Docker has started monitoring it. This prevents a container which does not start at all from going into a restart loop.
If you manually stop a container, its restart policy is ignored until the Docker daemon restarts or the container is manually restarted. This is another attempt to prevent a restart loop.
Restart policies only apply to containers. Restart policies for swarm services are configured differently.
Documentation
I had some time to debug this more today -> because I was using an 'official' docker image I had little to no visibility into what was occurring. To resolve this, I extended the official image and invoked my own entrypoint. The Dockerfile:
FROM officialImage:version
ENV envOne=value1 \
envTwo=value2
COPY wrapper-entrypoint.sh /
ENTRYPOINT ["/wrapper-entrypoint.sh"]
Then I did a 'set -x' in the wrapper-entrypoint.sh script and invoked the original:
#!/bin/bash
set -x
echo "Be pedantic: all args passed: $#"
bash -x ./original-entrypoint.sh "$#"
From this I found:
Restart does call the original ENTRYPOINT with the original arguments. The official image I used detected it had already initialized and thus acted differently. This is why I was confused over the semantics. Using -x allowed me to see what was really happening.
I still don't know why docker kill stops the restart, but that is what I see - at least on Docker Data Center.
I don't believe Shared Data Volumes affect this in any way, SAVE for the actions a given ENTRYPOINT script might take based upon it's condition at the time of the restart.

Resources