I use pip install spider-terminal
and use Anaconda to open spider and show terminal like picture.
But it doesn't show my user name like normal terminal.
How can I fix this problem,
I want to use terminal inside spider.
Related
Im working on Ubuntu 20. I've installed docker, nvidia-docker2. On Pycharm, I've followed jetbrain guide, but in the advanced steps it isn't consistent with what I see in my setup. I use PyCharm Proffesional 2022.2.
In this step:
in the run options I put additionally --runtime=nvidia and --gpus=all.
Step 4 finishes as same as in the guide (almost, but it seems that it doesn't bother anything so on that later) and on step 5 I put manually the path to the interpreter in the virtual environment I've created using the Dockerfile.
In that way I am able to run the command of nvidia-smi and see correctly the GPU, but I don't see any packages I've installed during the Dockerfile build.
There is another option to connect the interpreter a little bit differently in which I do see the packages, but I can't run the nvidia-smi command and the torch.cuda.is_availble return False.
The way is instead of doing this as in the guide:
I press on the little down arrow in left of the Add Interpreter button and then click on Show all:
After which I can press the + button :
works, so it might be PyCharm "Python Console" issue.
and then I can choose Docker:
which will result in the difference mentioned above in functionality and also in the path dispalyed (the first one is the first remote interpreter top to bottom direction and the second is the second correspondingly):
Here of course the effect of the first and the second correspondingly:
Here is the results of the interpreter run with the first method connected interpreter:
and here is the second:
Of the following code:
Here is the Dockerfile file if you want to take a look:
Anyone configured it correctly and can help ?
Thank you in advance.
P.S: if I run the docker from services and enter the terminal the command nvidia-smi works fine and also the import of torch and the command torch.cuda.is_available return True.
P.S.2:
The thing that has worked for me for now is to change the Dockerfile to install directly torch with pip without create conda environement.
Then I set the path to the python2.7 and I can run the code, but not debug it.
for run the result is as expected (the packages list as was shown before is still empty, but it works, I guess somehow my IDE cannot access the packages list of the remote interpreter in that case, I dont know why):
But the debugger outputs the following error:
Any suggestions for the debugger issue also will be welcome, although it is a different issue.
Please update to 2022.2.1 as it looks like a known regression that has been fixed.
Let me know if it still does not work well.
At some point, whenever I use vi from the command line (windows 10/WSL) it starts up in insert mode, meaning that everything I usually do to navigate ends up adding stuff to the file, wasting time having to clean it up.
I didn't have a vimrc file, and there doesn't seem to be anything in my bash rc files to modify vi behavior. Any ideas what I may have done or any ideas how to stop this behavior? I'm using Ubuntu-20.04
FWIW, adding a .vimrc file with tab related settings didn't change it's behavior. I looked at the /etc/vimrc file, and nothing inside it seemed relevant.
After plowing through google search and trying everything I understand about configuring 'vim' and doing comparison tests, I think:
This behavior is specific to Windows Terminal when opening a WSL terminal. Using WSL's "native" terminal (i.e., clicking the "Ubuntu 20.04 LTS" menu in the "Start" menu) doesn't have this problem.
My original motivation for switching to Windows Terminal is for its multi-tab feature. But this new behavior is crazy -- it works against years of my muscle memory of using "vi", and I'm almost certain that one day I'll accidentally update some configuration file while reading it in "vi". And, I cannot re-train a new muscle memory because all the rest of the UNIX world (e.g., when I SSH into a remote server) hasn't changed. This is like constantly switching between a Mac keyboard and a PC keyboard where the Ctrl key, etc., are in different places.
My solution: I switched to MobaXterm. It has multi-tab support, and is actually richer in features compared to Windows Terminal.
Please run the following:
alias | grep vim
sudo find / -name .vimrc 2>/dev/null
These commands should show you all the places to check, change the alias or fix the .vimrc files found.
Do you find it always going into edit mode, when you vim a file directly and when you use vim as the git commit editor for example?
EDIT:
You could also try which -a vim or whereis vim to see if you have multiple versions. Or failing that sudo find / -name vim 2>/dev/null
here is a better solution. I downloaded the binary.
https://github.com/lxhillwind/vim-bin/releases/tag/v9.0.0978
Put the vim command in /usr/bin/vi
Put the runtime in:
/usr/local/share/vim/runtim
sudo apt remove vim vim-common vim-runtime vim-tiny
sudo apt purge vim vim-common vim-doc vim-runtime vim-tiny
The second line actually gets rid of residual-defaults.
There is also a defaults.vim someplace on the system. I just nuked it.
I went through and made sure there were no aliases or vi or vim configuration files, but still no luck.
This is a horrible solution, but the only thing that is keeping my sanity right now.
vi -c ":imap jj "
You can alias it in your .bashrc. Looking into better solutions.
whem i use the comand:
$ go get -u -d gocv.io/x/gocv
i get the error:
package gocv.io/x/gocv: cannot download, /home/ariel/go is a GOROOT, not a GOPATH. For more details see: 'go help gopath'
iḿ using ubuntu 18.04
It looks like you have installed the go binary into where your default GOPATH is. Either set the GOPATH to be something different, or move your installation.
I'm using ubuntu and I call gedit by using this command:'sudo gedit filename.java'. I'm newbie in ubuntu so now I can not located that file. Ah I'm using windows XP and ubuntu and I have three disk C,D and E in windows XP the fourth disk for ubuntu is not display in windows XP. Can anyone show me where I can find my file? Thank you very much!
Try looking up the command "find". It will locate files.
The next time you need to find a file and you don't know where it is, just use the locate program included with Ubuntu. Sure, your file most likely won't show up immediately in the slocate database, but it's a really good searcher.
Also, the command line and the run prompt assume that the starting point, that is, the current working directory is always "~" unless you've set it differently. That means that all files and paths are relative to your home folder: /home/username for a user and /root for the root user.
Finally, you do not need to use the sudo command for writing code in your own home directory, and thus you can just stick with gedit filename.java. However, if you ever do need to use a graphical application with root/superuser privileges, use gksu for GTK apps and kdesu for KDE apps. sudo is for when you are running an program or need elevated privileges in a terminal.
Type "man find" into the terminal to get a description of how to use the command. But first place I'd look is the home folder. Open up the terminal and type "~" without quotes.
Open a terminal again ( from where you initially typed sudo ) and type ls -l you have to find it there.
I've just downloaded shoes but can't get them out the box.
double clicked on shoes2.run in ubuntu intrepid and gedit opened with the following message:
Could not open the file /home/mark/Marks files/2…ng/Programming/shoes2.run using the Unicode (UTF-8) character coding.
Please check that you are not trying to open a binary file.
Select a different character coding from the menu and try again.
It offered a dropdown with 2 options and a retry button:
Current locale (UTF-8)
Western (ISO-8859-15)
Neither of them are recognized.
How do i get it running?
m-
I had this same problem. try sudo chmoding the file :
sudo chmod 777 shoes2.run
then try running it as a script
./shoes2.run
that should work.
I am still trying to get shoes2 in my path so I can run it easily like the previous version (which I got through apt-get) right now I have to run it as a script each time I use it.
Good Luck!