Related
I've used docker to install couchbase on my ubuntu machine using (https://hub.docker.com/r/couchbase/server/). The docker run query is as follows:
docker run -d --name db -p 8091-8094:8091-8094 -p 11210:11210 -v /home/dockercontent/couchbase:/opt/couchbase/var couchbase
Everything works perfectly fine. My application connects, I'm able to insert/update and query the couchbase. Now, I'm looking to debug a situation wherein the couchbase is on my co-developers machine who also has the same installation i.e., couchbase on docker using the above link. For achieving this, I wanted to run cbbackup on his installation. To achieve this, I run the following command which is a variation of the above link:
bash -c "clear && docker exec -it couch-db sh"
Can anyone please help me with the location of /opt/couchbase/bin in this setup? I believe this is where I can get access to "cbbackup", "cbrestore" and "cbtransfer" which I can then use to backup and restore data from my colleague's machine.
Thanks,
Abhi.
When you run the command
docker run -d --name db -p 8091-8094:8091-8094 -p 11210:11210 -v /home/dockercontent/couchbase:/opt/couchbase/var couchbase
you're pulling a docker image and spawning a docker container.
Please read more about Docker and containerization.
In order to run cbbackup you need to log into your docker container.
Follow these steps:
Retrieve the container-id:
$ docker ps -a
Look for the CONTAINER ID for IMAGE NAME=couchbase
Login to the container using the command:
$ docker exec -it <container-id> bash
Go to the directory : /opt/couchbase/bin using:
$ cd /opt/couchbase/bin
You'll find cbbackup binary in this directory.
I need to run the docker container with logs redirected to a file in a shared location. I searched a lot for but didn't a solution for this.
what I tried is:
Run the docker container first
docker run --name sample -d -p 8083:8080 xxxxx.yyyy.zzz/test/test-application:latest
then I ran
docker run -v /home/ubuntu/logs:/opt/logs sample
but when i check /home/ubuntu/logs folder, nothing is there.
Can anyone help me on this?
Thanks in advance,
You need to mount your external directory where you want logs to be stored when running the container.
docker run --name sample -d -p 8083:8080 -v /home/ubuntu/logs:/opt/logs xxxxx.yyyy.zzz/test/test-application:latest
you redirect it with a command such as
docker logs sample > /home/ubuntu/logs
see also
Redirect application logs to docker logs
and
how to redirect docker logs to a single file?
According to tutorial I read so far, use "docker run -d" will start a container from image, and the container will run in background. This is how it looks like, we can see we already have container id.
root#docker:/home/root# docker run -d centos
605e3928cdddb844526bab691af51d0c9262e0a1fc3d41de3f59be1a58e1bd1d
But if I ran "docker ps", nothing was returned.
So I tried "docker ps -a", I can see container already exited:
root#docker:/home/root# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
605e3928cddd centos:latest "/bin/bash" 31 minutes ago Exited (0) 31 minutes ago kickass_swartz
Anything I did wrong? How can I troubleshoot this issue?
The centos dockerfile has a default command bash.
That means, when run in background (-d), the shell exits immediately.
Update 2017
More recent versions of docker authorize to run a container both in detached mode and in foreground mode (-t, -i or -it)
In that case, you don't need any additional command and this is enough:
docker run -t -d centos
The bash will wait in the background.
That was initially reported in kalyani-chaudhari's answer and detailed in jersey bean's answer.
vonc#voncvb:~$ d ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
4a50fd9e9189 centos "/bin/bash" 8 seconds ago Up 2 seconds wonderful_wright
Note that for alpine, Marinos An reports in the comments:
docker run -t -d alpine/git does not keep the process up.
Had to do: docker run --entrypoint "/bin/sh" -it alpine/git
Original answer (2015)
As mentioned in this article:
Instead of running with docker run -i -t image your-command, using -d is recommended because you can run your container with just one command and you don’t need to detach terminal of container by hitting Ctrl + P + Q.
However, there is a problem with -d option. Your container immediately stops unless the commands keep running in foreground.
Docker requires your command to keep running in the foreground. Otherwise, it thinks that your applications stops and shutdown the container.
The problem is that some application does not run in the foreground. How can we make it easier?
In this situation, you can add tail -f /dev/null to your command.
By doing this, even if your main command runs in the background, your container doesn’t stop because tail is keep running in the foreground.
So this would work:
docker run -d centos tail -f /dev/null
Or in Dockerfile:
ENTRYPOINT ["tail"]
CMD ["-f","/dev/null"]
A docker ps would show the centos container still running.
From there, you can attach to it or detach from it (or docker exec some commands).
According to this answer, adding the -t flag will prevent the container from exiting when running in the background. You can then use docker exec -i -t <image> /bin/bash to get into a shell prompt.
docker run -t -d <image> <command>
It seems that the -t option isn't documented very well, though the help says that it "allocates a pseudo-TTY."
Background
A Docker container runs a process (the "command" or "entrypoint") that keeps it alive. The container will continue to run as long as the command continues to run.
In your case, the command (/bin/bash, by default, on centos:latest) is exiting immediately (as bash does when it's not connected to a terminal and has nothing to run).
Normally, when you run a container in daemon mode (with -d), the container is running some sort of daemon process (like httpd). In this case, as long as the httpd daemon is running, the container will remain alive.
What you appear to be trying to do is to keep the container alive without a daemon process running inside the container. This is somewhat strange (because the container isn't doing anything useful until you interact with it, perhaps with docker exec), but there are certain cases where it might make sense to do something like this.
(Did you mean to get to a bash prompt inside the container? That's easy! docker run -it centos:latest)
Solution
A simple way to keep a container alive in daemon mode indefinitely is to run sleep infinity as the container's command. This does not rely doing strange things like allocating a TTY in daemon mode. Although it does rely on doing strange things like using sleep as your primary command.
$ docker run -d centos:latest sleep infinity
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d651c7a9e0ad centos:latest "sleep infinity" 2 seconds ago Up 2 seconds nervous_visvesvaraya
Alternative Solution
As indicated by cjsimon, the -t option allocates a "pseudo-tty". This tricks bash into continuing to run indefinitely because it thinks it is connected to an interactive TTY (even though you have no way to interact with that particular TTY if you don't pass -i). Anyway, this should do the trick too:
$ docker run -t -d centos:latest
Not 100% sure whether -t will produce other weird interactions; maybe leave a comment below if it does.
Hi this issue is because docker containers exit if there is no running application in the container.
-d
option is just to run a container in deamon mode.
So the trick to make your container continuously running is point to a shell file in docker which will keep your application running.You can try with a start.sh file
Eg: docker run -d centos sh /yourlocation/start.sh
This start.sh should point to a never ending application.
In case if you dont want any application to be running,you can install monit which will keep your docker container running.
Please let us know if these two cases worked for you to keep your container running.
All the best
You can accomplish what you want with either:
docker run -t -d <image-name>
or
docker run -i -d <image-name>
or
docker run -it -d <image-name>
The command parameter as suggested by other answers (i.e. tail -f /dev/null) is completely optional, and is NOT required to get your container to stay running in the background.
Also note the Docker documentation suggests that combining -i and -t options will cause it to behave like a shell.
See:
https://docs.docker.com/engine/reference/run/#foreground
I have this code snippet run from the ENTRYPOINT in my docker file:
while true
do
echo "Press [CTRL+C] to stop.."
sleep 1
done
Run the built docker image as:
docker run -td <image name>
Log in to the container shell:
docker exec -it <container id> /bin/bash
execute command as follows :
docker run -t -d <image-name>
if you want to specify port then command as below:
docker run -t -d -p <port-no> <image-name>
verify the running container using following command:
docker ps
Docker container exits if task inside is done, so if you want to keep it alive even if it does not have any job or already finished them, you can do docker run -di image. After you do docker container ls you will see it running.
Docker requires your command to keep running in the foreground. Otherwise, it thinks that your applications stops and shutdown the container.
So if your docker entry script is a background process like following:
/usr/local/bin/confd -interval=30 -backend etcd -node $CONFIG_CENTER &
The '&' makes the container stop and exit if there are no other foreground process triggered later.
So the solution is just remove the '&' or have another foreground CMD running after it, such as
tail -f server.log
If you are using CMD at the end of your Dockerfile, what you can do is adding the code at the end. This will only work if your docker is built on ubuntu, or any OS that can use bash.
&& /bin/bash
Briefly the end of your Dockerfile will look like something like this.
...
CMD ls && ... && /bin/bash
So if you have anything running automatically after you run your docker image, and when the task is complete the bash terminal will be active inside your docker. Thereby, you can enter you shell commands.
Maybe it is just me but on CentOS 7.3.1611 and Docker 1.12.6 but I ended up having to use a combination of the answers posted by #VonC & #Christopher Simon to get this working reliably. Nothing I did before this would stop the container from exiting after it ran CMD successfully. I am starting oracle-xe-11Gr2 and sshd.
Dockerfile
...
RUN ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N '' && systemctl enable sshd
...
CMD /etc/init.d/oracle-xe start && /sbin/sshd && tail -f /dev/null
Then adding -d -t and -i to run
docker run --shm-size=2g --name oracle-db -d -t -i -p 5022:22 -p 5080:8080 -p 1521:1521 centos-oracle:7.3.1611
Finally after hours of bashing my head against the wall
ssh -v root#127.0.0.1 -p 5022
...
root#127.0.0.1's password:
debug1: Authentication succeeded (password).
For whatever reason the above will exit after executing CMD if the tail -f is removed, or any of the -t -d -i options are omitted.
I had the same issue, just opening another terminal with a bash on it worked for me :
create container:
docker run -d mcr.microsoft.com/mssql/server:2019-CTP3.0-ubuntu
containerid=52bbc9b30557
start container:
docker start 52bbc9b30557
start bash to keep container running:
docker exec -it 52bbc9b30557 bash
start process you need:
docker exec -it 52bbc9b30557 /path_to_cool_your_app
Running docker with interactive mode might solve the issue.
Here is the example for running image with and without interactive mode
chaitra#RSK-IND-BLR-L06:~/dockers$ sudo docker run -d -t -i test_again1.0
b6b9a942a79b1243bada59db19c7999cfff52d0a8744542fa843c95354966a18
chaitra#RSK-IND-BLR-L06:~/dockers$ sudo docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
chaitra#RSK-IND-BLR-L06:~/dockers$ sudo docker run -d -t -i test_again1.0 bash
c3d6a9529fd70c5b2dc2d7e90fe662d19c6dad8549e9c812fb2b7ce2105d7ff5
chaitra#RSK-IND-BLR-L06:~/dockers$ sudo docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
c3d6a9529fd7 test_again1.0 "bash" 2 seconds ago Up 1 second awesome_haibt
You can simply use:
docker container run -d -it <container name or id> /bin/bash
I have explained it in the following post that has the same question.
How to retain docker alpine container after "exit" is used?
I was also facing the same problem but in a different manner. When I create the docker containers. it automatically stops the unused containers which are just running in the background. Sometimes it also stops the containers that are in the use.
In my situation, this is because of the permission of the docker.sock files it earlier has.
what you have to do is :-
Install docker again.(As i work on ubuntu i install it from here)
Run the command to change the permissions.
sudo chmod 666 /var/run/docker.sock
Install docker-compose (this is optional as I have compose file to create many containers together)
sudo curl -L "https://github.com/docker/compose/releases/download/1.26.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
sudo chmod +x /usr/local/bin/docker-compose
check for the version to ensure that I have the latest one and not get problem with some deprications.
Then I run the docker container build.
Argument order matters
Jersey Beans answer (all 3 examples) worked for me. After quite a bit of trial and error I realized that the order of the arguments matter.
Keeps the container running in the background:
docker run -t -d <image-name>
Keeps the container running in the foreground: docker run <image-name> -t -d
It wasn't obvious to me coming from a Powershell background.
if you want to operate on the container, you need to run it in foreground to keep it alive.
There are multiple options out there to run the container in foreground/detached state. But if you still feel the issue is not resolved, you can try troubleshooting the issue by viewing the logs.
sudo docker logs -f >> container.log
additionally you can also use --details to show extra details provided to logs.
Incorrect Path to App in Dockerfile:
I was migrating an application from a RHEL server to a Docker container using Alpine Linux.
No errors during the build, so I was surprised to see the container immediately exit!
First port of call:
docker logs <containerID>
This revealed the path of the binary I had supplied to CMD in the Dockerfile was bogus:
line 0: /sbin/postfix: not found
Well that told me how things were broken, but not specifically where: I still required the correct path for the binary in Alpine Linux...
Troubleshooting:
Googling didn't reveal the correct path to it, so I added the following line to my Dockerfile:
RUN which postfix
I then reviewed my build logging- provided by the below command appended to my build command- to retrieve the value of RUN which postfix
--progress=plain > /path/to/build.log 2>&1
The Fix:
I deleted this test build, supplied the correct path- /usr/sbin/postfix - to CMD in the Dockerfile, deleted RUN which postfix and ran another build.
Voila; the process now remained up.
So a duff path was causing the container to immediately exit...
These 4 commands all work to keep your docker container running:
docker run -td centos
docker run -dt centos
docker run -t -d centos
docker run -d -t centos
Firstly, You need to check if any container is running
Type command,
docker ps -all
If any container is running then stop them
Type command,
docker stop Container Id
Now, Finally run the docker by using below command..........
docker run -t -p 2020:3000 dockerImageName
Hence, Open your google chrome and visit on localhost:2020
Congrats :)
I created a container with -d so it's not interactive.
docker run -d shykes/pybuilder bin/bash
I see that the container has exited:
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d6c45e8cc5f0 shykes/pybuilder:latest "bin/bash" 41 minutes ago Exited (0) 2 seconds ago clever_bardeen
Now I would like to run occasional commands on the machine and exit. Just to get the response.
I tried to start the machine. I tried attaching. I thought I could call run with a container, but that does not seem to be allowed. Using start just seems to run and then exist quickly.
I'd like to get back into interactive mode after exiting.
I tried:
docker attach d6c45e8cc5f0
But I get:
2014/10/01 22:33:34 You cannot attach to a stopped container, start it first
But if I start it, it exits anyway. Catch 22. I can't win.
In October 2014 the Docker team introduced docker exec command: https://docs.docker.com/engine/reference/commandline/exec/
So now you can run any command in a running container just knowing its ID (or name):
docker exec -it <container_id_or_name> echo "Hello from container!"
Note that exec command works only on already running container. If the container is currently stopped, you need to first run it with the following command:
docker run -it -d shykes/pybuilder /bin/bash
The most important thing here is the -d option, which stands for detached. It means that the command you initially provided to the container (/bin/bash) will be run in the background and the container will not stop immediately.
Your container will exit as the command you gave it will end. Use the following options to keep it live:
-i Keep STDIN open even if not attached.
-t Allocate a pseudo-TTY.
So your new run command is:
docker run -it -d shykes/pybuilder bin/bash
If you would like to attach to an already running container:
docker exec -it CONTAINER_ID /bin/bash
In these examples /bin/bash is used as the command.
So I think the answer is simpler than many misleading answers above.
To start an existing container which is stopped
docker start <container-name/ID>
To stop a running container
docker stop <container-name/ID>
Then to login to the interactive shell of a container
docker exec -it <container-name/ID> bash
To start an existing container and attach to it in one command
docker start -ai <container-name/ID>
Beware, this will stop the container on exit. But in general, you need to start the container, attach and stop it after you are done.
To expand on katrmr's answer, if the container is stopped and can't be started due to an error, you'll need to commit it to an image. Then you can launch bash in the new image:
docker commit [CONTAINER_ID] temporary_image
docker run --entrypoint=bash -it temporary_image
Some of the answers here are misleading because they concern containers that are running, not stopped.
Sven Dowideit explained on the Docker forum that containers are bound to their process (and Docker can't change the process of a stopped container, seemingly due at least to its internal structure: https://github.com/docker/docker/issues/1437). So, basically the only option is to commit the container to an image and run it with a different command.
See https://forums.docker.com/t/run-command-in-stopped-container/343
(I believe the "ENTRYPOINT with arguments" approach wouldn't work either, since you still wouldn't be able to change the arguments to a stopped container.)
I had to use bash -c to run my command:
docker exec -it CONTAINER_ID bash -c "mysql_tzinfo_to_sql /usr/share/zoneinfo | mysql mysql"
Creating a container and sending commands to it, one by one:
docker create --name=my_new_container -it ubuntu
docker start my_new_container
// ps -a says 'Up X seconds'
docker exec my_new_container /path/to/my/command
// ps -a still says 'Up X+Y seconds'
docker exec my_new_container /path/to/another/command
If you are trying to run shell script, you need run it as bash.
docker exec -it containerid bash -c /path/to/your/script.sh
This is a combined answer I made up using the CDR LDN answer above and the answer I found here.
The following example starts an Arch Linux container from an image, and then installs git on that container using the pacman tool:
sudo docker run -it -d archlinux /bin/bash
sudo docker ps -l
sudo docker exec -it [container_ID] script /dev/null -c "pacman -S git --noconfirm"
That is all.
Pipe a command to docker exec bash stdin
Must remove the -t for it to work:
echo 'touch myfile' | docker exec -i CONTAINER_NAME bash
This can be more convenient that using CLI options sometimes.
Tested with:
docker run --name ub16 -it ubuntu:16.04 bash
then on another shell:
echo 'touch myfile' | docker exec -i ub16 bash
Then on first shell:
ls -l myfile
Tested on Docker 1.13.1, Ubuntu 16.04 host.
I would like to note that the top answer is a little misleading.
The issue with executing docker run is that a new container is created every time. However, there are cases where we would like to revisit old containers or not take up space with new containers.
(Given clever_bardeen is the name of the container created...)
In OP's case, make sure the docker image is first running by executing the following command:
docker start clever_bardeen
Then, execute the docker container using the following command:
docker exec -it clever_bardeen /bin/bash
I usually use this:
docker exec -it my-container-name bash
to continuously interact with a running container.
Assuming the image is using the default entrypoint /bin/sh -c, running /bin/bash will exit immediately in daemon mode (-d). If you want this container to run an interactive shell, use -it instead of -d. If you want to execute arbitrary commands in a container usually executing another process, you might want to try nsenter or nsinit. Have a look at https://blog.codecentric.de/en/2014/07/enter-docker-container/ for the details.
Unfortunately it is impossible to override ENTRYPOINT with arguments with docker run --entrypoint to achieve this goal.
Note: you can override the ENTRYPOINT setting using --entrypoint, but
this can only set the binary to exec (no sh -c will be used).
For Mac:
$ docker exec -it <container-name> sh
if you want to connect as root user:
$ docker exec -u 0 -it <container-name> sh
Simple answer: start and attach at the same time. In this case you are doing exactly what you asked for.
docker start <CONTAINER_ID/CONTAINER_NAME> && docker attach <CONTAINER_ID/CONTAINER_NAME>
make sure to change <CONTAINER_ID/CONTAINER_NAME>
I am running windows container and I need to look inside the docker container for files and folder created and copied.
In order to do that I used following docker entrypoint command to get the command prompt running inside the container or attach to the container.
ENTRYPOINT ["C:\\Windows\\System32\\cmd.exe", "-D", "FOREGROUND"]
That helped me both to the command prompt attach to container and to keep the container a live. :)
# docker exec -d container_id command
Ex:
# docker exec -d xcdefrdtt service jira stop
A quick way to resume and access the most recently exited container:
docker start -a -i `docker ps -q -l`
An easy solution that solved a similar problem for me:
docker run --interactive --tty <name_of_image>
I was naively expecting this command to run a bash shell in a running container :
docker run "id of running container" /bin/bash
it looks like it's not possible, I get the error :
2013/07/27 20:00:24 Internal server error: 404 trying to fetch remote history for 27d757283842
So, if I want to run bash shell in a running container (ex. for diagnosis purposes)
do I have to run an SSH server in it and loggin via ssh ?
With docker 1.3, there is a new command docker exec. This allows you to enter a running docker:
docker exec -it "id of running container" bash
EDIT: Now you can use docker exec -it "id of running container" bash (doc)
Previously, the answer to this question was:
If you really must and you are in a debug environment, you can do this: sudo lxc-attach -n <ID>
Note that the id needs to be the full one (docker ps -notrunc).
However, I strongly recommend against this.
notice: -notrunc is deprecated, it will be replaced by --no-trunc soon.
Just do
docker attach container_name
As mentioned in the comments, to detach from the container without stopping it, type Ctrlpthen Ctrlq.
Since things are achanging, at the moment the recommended way of accessing a running container is using nsenter.
You can find more information on this github repository. But in general you can use nsenter like this:
PID=$(docker inspect --format {{.State.Pid}} <container_name_or_ID>)
nsenter --target $PID --mount --uts --ipc --net --pid
or you can use the wrapper docker-enter:
docker-enter <container_name_or_ID>
A nice explanation on the topic can be found on Jérôme Petazzoni's blog entry:
Why you don't need to run sshd in your docker containers
First thing you cannot run
docker run "existing container" command
Because this command is expecting an image and not a container and it would anyway result in a new container being spawned (so not the one you wanted to look at)
I agree with the fact that with docker we should push ourselves to think in a different way (so you should find ways so that you don't need to log onto the container), but I still find it useful and this is how I work around it.
I run my commands through supervisor in DEAMON mode.
Then I execute what I call docker_loop.sh
The content is pretty much this:
#!/bin/bash
/usr/bin/supervisord
/usr/bin/supervisorctl
while ( true )
do
echo "Detach with Ctrl-p Ctrl-q. Dropping to shell"
sleep 1
/bin/bash
done
What it does is that it allows you to "attach" to the container and be presented with the supervisorctl interface to stop/start/restart and check logs.
If that should not suffice, you can Ctrl+D and you will drop into a shell that will allow you to have a peek around as if it was a normal system.
PLEASE DO ALSO TAKE INTO ACCOUNT that this system is not as secure as having the container without a shell, so take all the necessary steps to secure your container.
Keep an eye on this pull request: https://github.com/docker/docker/pull/7409
Which implements the forthcoming docker exec <container_id> <command> utility. When this is available it should be possible to e.g. start and stop the ssh service inside a running container.
There is also nsinit to do this: "nsinit provides a handy way to access a shell inside a running container's namespace", but it looks difficult to get running.
https://gist.github.com/ubergarm/ed42ebbea293350c30a6
You can use
docker exec -it <container_name> bash
Here's my solution
In the Dockerfile:
# ...
RUN mkdir -p /opt
ADD initd.sh /opt/
RUN chmod +x /opt/initd.sh
ENTRYPOINT ["/opt/initd.sh"]
In the initd.sh file
#!/bin/bash
...
/etc/init.d/gearman-job-server start
/etc/init.d/supervisor start
#very important!!!
/bin/bash
After image is built you have two options using exec or attach:
Use exec (preferred) and run:
docker run --name $CONTAINER_NAME -dt $IMAGE_NAME
then
docker exec -it $CONTAINER_NAME /bin/bash
and use CTRL + D to detach
Use attach and run:
docker run --name $CONTAINER_NAME -dit $IMAGE_NAME
then
docker attach $CONTAINER_NAME
and use CTRL + P and CTRL + Q to detach
Note: The difference between options is in parameter -i
There is actually a way to have a shell in the container.
Assume your /root/run.sh launches the process, process manager (supervisor), or whatever.
Create /root/runme.sh with some gnu-screen tricks:
# Spawn a screen with two tabs
screen -AdmS 'main' /root/run.sh
screen -S 'main' -X screen bash -l
screen -r 'main'
Now, you have your daemons in tab 0, and an interactive shell in tab 1. docker attach at any time to see what's happening inside the container.
Another advice is to create a "development bundle" image on top of the production image with all the necessary tools, including this screen trick.
There are two ways.
With attach
$ sudo docker attach 665b4a1e17b6 #by ID
With exec
$ sudo docker exec - -t 665b4a1e17b6 #by ID
If the goal is to check on the application's logs, this post shows starting up tomcat and tailing the log as part of CMD. The tomcat log is available on the host using 'docker logs containerid'.
http://blog.trifork.com/2013/08/15/using-docker-to-efficiently-create-multiple-tomcat-instances/
It's useful assign name when running container. You don't need refer container_id.
docker run --name container_name yourimage
docker exec -it container_name bash
first, get the container id of the desired container by
docker ps
you will get something like this:
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
3ac548b6b315 frontend_react-web "npm run start" 48 seconds ago Up 47 seconds 0.0.0.0:3000->3000/tcp frontend_react-web_1
now copy this container id and run the following command:
docker exec -it container_id sh
docker exec -it 3ac548b6b315 sh
Maybe you were mislead like myself into thinking in terms of VMs when developing containers. My advice: Try not to.
Containers are just like any other process. Indeed you might want to "attach" to them for debugging purposes (think of /proc//env or strace -p ) but that's a very special case.
Normally you just "run" the process, so if you want to modify the configuration or read the logs, just create a new container and make sure you write the logs outside of it by sharing directories, writing to stdout (so docker logs works) or something like that.
For debugging purposes you might want to start a shell, then your code, then press CTRL-p + CTRL-q to leave the shell intact. This way you can reattach using:
docker attach <container_id>
If you want to debug the container because it's doing something you haven't expect it to do, try to debug it: https://serverfault.com/questions/596994/how-can-i-debug-a-docker-container-initialization
No. This is not possible. Use something like supervisord to get an ssh server if that's needed. Although, I definitely question the need.