I am trying to do
docker run -d --name artifactory -v D://JFrog/artifactory/var/:/var/opt/jfrog/artifactory -p 8281:8081 docker.bintray.io/jfrog/artifactory-oss
By following this tutorial: https://www.jfrog.com/confluence/display/JFROG/Installing+Artifactory#InstallingArtifactory-DockerComposeInstallation
However, even after setting permissions and adding localhost as shared.node.ip in $JFROG_HOME/artifactory/var/etc/system.yaml
The logs are as follows from docker console: https://pastebin.com/dQAckECE
Any leads/help will be appreciated. TIA
Related
I am trying to install Docker desktop on Mac m1 but after installation dockers asks to execute following command.
docker run -d -p 80:80 docker/getting-started
But, it gives following error
Unable to find image 'docker/getting-started:latest' locally
docker: Error response from daemon: Get "https://registry-1.docker.io/v2/": read tcp 192.168.65.4:58764->192.168.65.5:3128: read: connection reset by peer.
See 'docker run --help'.
Why is it not pulling docker data?
(Sorry for the miss... going to try this again)
Try docker exec command before your command.
Like this docker exec docker run -d -p 80:80 docker/getting-started
"Tried using the docker exec command and it appears to have worked OK with two different ubuntu instances. Did not try Docker Desktop.
It kind of looks like there is a problem with Docker Desktop manipulating Terminal.app.
I’m using the macOS default zshell."
https://forums.docker.com/t/problems-getting-started/116487/9
I am trying a basic docker test in GCP compute instance. I pulled a tomcat image from the official repo. then ran a command to run the container. Command is :
docker run -te --rm -d -p 80:8080 tomcat
It created a container for me with below id.
3f8ce49393c708f4be4d3d5c956436e000eee6ba7ba08cba48ddf37786104a37
If I do docker ps, I get below
docker run -te --rm -d -p 80:8080 tomcat
3f8ce49393c708f4be4d3d5c956436e000eee6ba7ba08cba48ddf37786104a37
However the tomcat admin console does not open. The reason is tomcat image is trying to create the config files under /usr/local. However, it is a read only file system. So the config files are not created.
Is there a way to ask Docker to create the files in a different location? Or, is there any other way to handle it?
Thanks in advance.
I'm new Elastic Stack. I've been able to install Elasticsearch and Kibana via Docker using the instructions on elastic.co. However, I'm having some difficulty installing filebeats using the directions on elastic.co. After starting Elasticsearch and Kibana, when I run:
docker run docker.elastic.co/beats/filebeat:7.13.0 setup -E setup.kibana.host=kibana:5601 -E output.elasticsearch.hosts=["localhost:9200"]
I get the following output:
Exiting: couldn't connect to any of the configured Elasticsearch hosts. Errors: [error connecting to Elasticsearch at http://localhost:9200: Get "http://localhost:9200": dial tcp [::1]:9200: connect: cannot assign requested address]
This is with a docker setup. Any guidance to fixing this would be great. Thanks.
if you were following instructions from tutorial You can see, that it should use the same network.
So instead of
docker run docker.elastic.co/beats/filebeat:7.13.0 setup -E setup.kibana.host=kibana:5601 -E output.elasticsearch.hosts=["localhost:9200"]
should be
docker run --net {network_name} docker.elastic.co/beats/filebeat:7.13.0 setup -E setup.kibana.host=kibana:5601 -E output.elasticsearch.hosts=["localhost:9200"]
Check Your elasticsearch container network with following command
docker inspect -f '{{.NetworkSettings.Networks}}' {es-container-name}
If You try to run Kibana+Elastic+Filebeat on Windows, I would suggest writing a dockerfile (or dockercompose) with Your own fileabeat.yml.
Of course, if You run Your elasticserach non-containered, You should use host network, but it's another story.
I read the blog: https://www.rubix.nl/blogs/tibco-monitoring-docker-how-create-instantiate-and-start-tibco-businessworks-container-edition
The blog entry is very interesting. Unfortunately, it does not work for me. My Tibco service does not connect to the monitoring.
Here is some data:
Bwce Version: 2.3
Bwce Mon Version: 2.4
Log entry from my Tibcoservice: Failed to register with Monitoring
application - response code [400] and Reason Phrase [Bad Request]
Log entry from my bwce-mon:
INFO:{"host":"172.17.0.4","port":"8090","instanceName":"6866a20e7bd6","appName":"6866a20e7bd6"
WARN : Container is not running for (host, port):(172.17.0.4, 8090). Please register running container
Docker run command for Tibcoservice: docker run -d -p 7575:7575 --link bwceadmin --name helloworld -e EMS_URL=tcp://ubdev-ws-003:7223 -e EMS_QUEUE=docker.queue -e BW_APP_MONITORING_CONFIG='{"url":"http://bwceadmin:8080"}'
helloworld:1.0.0
Docker run command for bwce-mon: docker run -p 8080:8080 -e persistence_DB="dockerpostgres" -e
DB_URL="postgres://postgres:#172.17.0.2:5432/postgres" -e
PERSISTENCE_TYPE=postgres --name bwceadmin bwcemon:2.4.0
Do you have any idea why this did not work for me?
I didn't write the blog post, but I think your issue might be in the configuration of the property "BW_APP_MONITORING_CONFIG".
Can you check if you can access the URL http://bwceadmin:8080? If you can't access that, the issue is most likely to do with the configuration of that property.
To find the setting for that URL, you'll need to know the IP address of the container running your app:
docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' <your container name>
After getting the IP address (like 10.100.22.1), you can start a new BWCE app and add a property for the monitoring URL:
BW_APP_MONITORING_CONFIG='{"url":"http://10.100.22.1:8080"}'
I'm brand new to both TeamCity and Docker. I'm struggling to get a Docker container with TeamCity running and usable on my local machine. I've tried several things, to no avail:
I installed Docker for Mac per instructions here. I then tried to run the following command, documented here, for setting up teamcity in docker:
docker run -it --name teamcity-server-instance \
-v c:\docker\data:/data/teamcity_server/datadir \
-v c:\docker\logs:/opt/teamcity/logs \
-p 8111:8111 \
jetbrains/teamcity-server
That returned the following error: docker: Error response from daemon: Invalid bind mount spec "c:dockerdata:/data/teamcity_server/datadir": invalid mode: /data/teamcity_server/datadir.
Taking a different tack, I tried to follow the instructions here - I tried running the following command:
docker run -it --name teamcity -p 8111:8111 sjoerdmulder/teamcity
The terminal indicated that it was starting up a web server, but I can't browse to it at localhost, nor at localhost:8111 (error ERR_SOCKET_NOT_CONNECTED without the port, and ERR_CONNECTION_REFUSED with the port).
Since the website with the docker run command says to install Docker via Docker Toolbox, I then installed that at the location they pointed to (here). I then tried the
docker-machine ip default
command they suggested, but it didn't work, error "Host does not exist: "default"". That makes sense, since the website said the "default" vm would be created by running Docker Quickstart and I didn't do that, but they don't provide any link to Docker Quickstart, so I don't know what they are talking about.
To try to get the IP address the container was running on, I tried this command
docker inspect --format='{{.Name}} - {{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $(docker ps -aq)
That listed the names of the running containers, each followed by a hyphen, then nothing. I also tried
docker ps -a
That listed running contaners also, but didn't give the IP. Also, the port is blank, and the status says "exited (130) 4 minutes ago", so it doesn't seem like the container stayed alive after starting.
I also tried again with port 80, hoping that would make the site show at localhost:
docker run -it --name teamcity2 -p 80:80 sjoerdmulder/teamcity
So at this point, I'm completely puzzled and blocked - I can't start the server at all following the instructions on hub.docker.com, and I can't figure out how to browse to the site that does start up with the other instructions.
I'll be very grateful for any assistance!
JetBrains now provides official docker images for TeamCity. I would recommend starting with those.
The example command in their TeamCity server image looks like this
docker run -it --name teamcity-server-instance \
-v <path to data directory>:/data/teamcity_server/datadir \
-v <path to logs directory>:/opt/teamcity/logs \
-p <port on host>:8111 \
jetbrains/teamcity-server
That looks a lot like your first attempt. However, c:\docker\data is a Windows file path. You said you're running this on a mac, so that's definitely not going to work.
Once TeamCity starts, it should be available on port 8111. That's what -p 8111:8111 part of the command does. It maps port 8111 on your machine to port 8111 in the VM Docker for Mac creates to run your containers. ERR_CONNECTION_REFUSED could be caused by several things. Two most likely possibilities are
TeamCity could take a little while to start up and maybe you didn't give it enough time. Solution is to wait.
-it would start the TeamCity container in interactive mode. If you exit out of the terminal window where you ran the command, the container will also probably terminate and will be inaccessible. Solution is to not close the window or run the container in detached mode.
There is a good overview of the differences between Docker for Mac and Docker Toolbox here: Docker for Mac vs. Docker Toolbox. You don't need both, and for most cases you'll want to use Docker for Mac for testing stuff out locally.