Hi I'm building a docker image that starts Mysql, Elasticsearch and application, it completes the build of the image but when I run the container it doesn't start and remains in exited status.
DOCKERFILE:
FROM ubuntu:20.04
WORKDIR \\wsl.localhost\Ubuntu\home\marco\project\multiple-docker-container\backend
COPY . .
RUN apt update
RUN apt-get update
RUN apt-get install wget -y
RUN apt install apt-transport-https ca-certificates gnupg -y
RUN wget -qO - https://artifacts.elastic.co/GPG-KEY-elasticsearch | apt-key add -
RUN sh -c 'echo "deb https://artifacts.elastic.co/packages/7.x/apt stable main" > /etc/apt/sources.list.d/elastic-7.x.list'
RUN apt-get update -y
RUN apt-get install elasticsearch -y
RUN apt install mysql-server -y
RUN apt install npm -y
RUN npm install
RUN npm install nodemon
RUN apt install nodejs -y
EXPOSE 3306
EXPOSE 9200
EXPOSE 5000
COPY entrypoint.sh /bin/entrypoint.sh
RUN chmod +x /bin/entrypoint.sh
ENTRYPOINT ["/bin/entrypoint.sh"]
ENTRYPOINT.SH
#!/bin/sh
service elasticsearch start
service elasticsearch enable
service mysql start
npm start
I expect at least that it goes up, I would like to understand which is the problem since on WSL ubuntu gives me this problem while on the virtual machine it works
I'm new to docker and I'd like to understand the reason for this error, I'm creating a dockerfile where to start Elasticsearch, Mysql and the application, when I build it gives me this error "Error response from daemon: dockerfile parse error line 38: instruction unknown: ENTRYPOINT["/BIN/ENTRYPOINT.SH"]"
Dockerfile
FROM ubuntu:20.04
WORKDIR \\wsl.localhost\Ubuntu\home\marco\project\multiple-docker-container\backend
COPY . .
RUN apt update
RUN apt-get update
RUN apt-get install wget -y
RUN apt install apt-transport-https ca-certificates gnupg -y
RUN wget -qO - https://artifacts.elastic.co/GPG-KEY-elasticsearch | apt-key add -
RUN sh -c 'echo "deb https://artifacts.elastic.co/packages/7.x/apt stable main" > /etc/apt/sources.list.d/elastic-7.x.list'
RUN apt-get update -y
RUN apt-get install elasticsearch -y
RUN apt install mysql-server -y
RUN apt install npm -y
RUN npm install
RUN npm install nodemon
RUN apt install nodejs -y
EXPOSE 3306
EXPOSE 9200
EXPOSE 5000
COPY entrypoint.sh /bin/entrypoint.sh
RUN chmod +x /bin/entrypoint.sh
ENTRYPOINT ["/bin/entrypoint.sh"]
entrypoint.sh
#!/bin/sh
service elasticsearch start
service elasticsearch enable
service mysql start
npm start `
What could be the problem? I'm running this on an ubuntu terminal
In your question you wrote ENTRYPOINT["/BIN/ENTRYPOINT.SH"], in the Dockerfile I see ENTRYPOINT ["/BIN/ENTRYPOINT.SH"].
If your are talking about ENTRYPOINT["/BIN/ENTRYPOINT.SH"] the error is the missing space before the opening square bracket.
The previous answer is not very helpful.
I was getting the same error, but I wasn't missing a space and my error was not missing the space.
Turns out, there were newlines between directives in the Dockerfile.
So clearly spacing matters a little more than it should. 😉
I am trying to use a node agent container in Jenkins to run npm instructions on it. So that, I am creating a Dockerfile to get a valid image with ssh and nodejs. The executor runs fine, but when I use npm it says that it doesn't know the command.
The same problem happens when (after building the dockerfile) I do docker exec -it af5451297d85 bash and after that, inside the container, I try to do npm --v (for example).
# This Dockerfile is used to build an image containing an node jenkins agent
FROM node:9.0
MAINTAINER Estefania Castro <estefania.castro#luceit.es>
# Upgrade and Install packages
RUN apt-get update && apt-get -y upgrade && apt-get install -y git openssh-server
# Install NGINX to test.
RUN apt-get install nginx -y
# Prepare container for ssh
RUN mkdir /var/run/sshd && adduser --quiet jenkins && echo "jenkins:jenkins" | chpasswd
RUN npm install
ENV CI=true
EXPOSE 22
CMD ["/usr/sbin/sshd", "-D"]
I would like to run npm instructions like npm install, npm publish, ... to manage my project in a jenkinsfile. Could anyone help?
Thanks
I have already solved the problem (after two weeks haha).
FROM jenkins/ssh-slave
# Install selected extensions and other stuff
RUN apt-get update && apt-get -y --no-install-recommends install && apt-get clean
RUN apt-get install -y curl
# Install nodejs
RUN curl -sL https://deb.nodesource.com/setup_8.x | bash -
RUN apt-get install -y nodejs && apt-get install -y nginx
I'm trying to deploy the following container on google cloud app engine using gcloud app deploy, it's the meanjs.org vanilla image. It uses a dockerfile, I'm new to docker and I'm trying to learn it on the fly, so if anyone can help that'd be great, thanks.
It looks as if the install of node via the dockerfile fails, I've checked node's documentation on github, and nothing has changed syntactically to what is in the existing dockerfile. I will attempt to recreate on my local workstation this morning, and will update this query shortly.
the errors are as follows..first docker error second errorbuild fail error
The docker file..
# Build:
# docker build -t meanjs/mean .
#
# Run:
# docker run -it meanjs/mean
#
# Compose:
# docker-compose up -d
FROM ubuntu:latest
MAINTAINER MEAN.JS
# 80 = HTTP, 443 = HTTPS, 3000 = MEAN.JS server, 35729 = livereload, 8080 = node-inspector
EXPOSE 80 443 3000 35729 8080
# Set development environment as default
ENV NODE_ENV development
# Install Utilities
RUN apt-get update -q \
&& apt-get install -yqq \
curl \
git \
ssh \
gcc \
make \
build-essential \
libkrb5-dev \
sudo \
apt-utils \
&& apt-get clean \
&& rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
# Install nodejs
RUN curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
RUN sudo apt-get install -yq nodejs \
&& apt-get clean \
&& rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
# Install MEAN.JS Prerequisites
RUN npm install --quiet -g gulp bower yo mocha karma-cli pm2 && npm cache clean
RUN mkdir -p /opt/mean.js/public/lib
WORKDIR /opt/mean.js
# Copies the local package.json file to the container
# and utilities docker container cache to not needing to rebuild
# and install node_modules/ everytime we build the docker, but only
# when the local package.json file changes.
# Install npm packages
COPY package.json /opt/mean.js/package.json
RUN npm install --quiet && npm cache clean
# Install bower packages
COPY bower.json /opt/mean.js/bower.json
COPY .bowerrc /opt/mean.js/.bowerrc
RUN bower install --quiet --allow-root --config.interactive=false
COPY . /opt/mean.js
# Run MEAN.JS server
CMD npm install && npm start
Okay, so after much wrestling unsuccessfully trying to install docker on windows, I went back to the dockerfile to try and identify the core issue here. Fortunately I find a solution as follows..
NodeJS is attempting to install on Ubuntu.
In the dockerfile at the root of the app
Ubuntu version is configured as:
FROM ubuntu:latest
simply change it to:
FROM ubuntu:14.04
I'm not sure if this is the best version to use for the build but it seems to be running successfully. Please feel free to amend/recommend an alternative solution. I'm new to Docker so pls be kind.
I'm trying to connect a pyodbc python script running in a docker container to login to a MSSQL database I have tried all sorts of docker files, but not been able to make the connection (fails when bulding the docker or when python tries to connect), Does anyone have a working dockerfile, using pyodbc:
Dockerfile:
# Use an official Python runtime as a parent image
FROM python:2.7-slim
# Set the working directory to /app
WORKDIR /app
# Copy the current directory contents into the container at /app
ADD . /app
# Install any needed packages specified in requirements.txt
RUN pip install -r requirements.txt
# Run app.py when the container launches
CMD ["python", "App.py"]
requirements.TXT
pyodbc
App.Py
import pyodbc
connection = pyodbc.connect('Driver={SQL Server};'
'Server=xxxx;'
'Database=xxx;'
'UID=xxxx;'
'PWD=xxxx')
cursor = connection.cursor()
cursor.execute("SELECT [Id],[Name] FROM [DCMM].[config].[Models]")
for row in cursor.fetchall():
print(row.Name)
connection.close()
Bulding the container
docker build -t sqltest .
Output:
Sending build context to Docker daemon 4.096kB
Step 1/5 : FROM python:2.7-slim
---> 426d65ab9a72
Step 2/5 : WORKDIR /app
---> Using cache
---> 725f35122880
Step 3/5 : ADD . /app
---> 3feb8b7744f7
Removing intermediate container 4214091a111a
Step 4/5 : RUN pip install -r requirements.txt
---> Running in 27aa4dcfe738
Collecting pyodbc (from -r requirements.txt (line 1))
Downloading pyodbc-4.0.17.tar.gz (196kB)
Building wheels for collected packages: pyodbc
Running setup.py bdist_wheel for pyodbc: started
Running setup.py bdist_wheel for pyodbc: finished with status 'error'
Failed building wheel for pyodbc
Complete output from command /usr/local/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-EfWsmy/pyodbc/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/tmpa3S13tpip-wheel- --python-tag cp27:
running bdist_wheel
running build
running build_ext
building 'pyodbc' extension
creating build
creating build/temp.linux-x86_64-2.7
creating build/temp.linux-x86_64-2.7/src
gcc -pthread -fno-strict-aliasing -g -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DPYODBC_VERSION=4.0.17 -DSQL_WCHART_CONVERT=1 -I/usr/local/include/python2.7 -c src/cursor.cpp -o build/temp.linux-x86_64-2.7/src/cursor.o -Wno-write-strings
unable to execute 'gcc': No such file or directory
error: command 'gcc' failed with exit status 1
----------------------------------------
Running setup.py clean for pyodbc
Failed to build pyodbc
Installing collected packages: pyodbc
Running setup.py install for pyodbc: started
Running setup.py install for pyodbc: finished with status 'error'
Complete output from command /usr/local/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-EfWsmy/pyodbc/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-BV4sRM-record/install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_ext
building 'pyodbc' extension
creating build
creating build/temp.linux-x86_64-2.7
creating build/temp.linux-x86_64-2.7/src
gcc -pthread -fno-strict-aliasing -g -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DPYODBC_VERSION=4.0.17 -DSQL_WCHART_CONVERT=1 -I/usr/local/include/python2.7 -c src/cursor.cpp -o build/temp.linux-x86_64-2.7/src/cursor.o -Wno-write-strings
unable to execute 'gcc': No such file or directory
error: command 'gcc' failed with exit status 1
----------------------------------------
Command "/usr/local/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-EfWsmy/pyodbc/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-BV4sRM-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-EfWsmy/pyodbc/
The command '/bin/sh -c pip install -r requirements.txt' returned a non-zero code: 1
Need to Run:
sudo apt-get install gcc
need to add a odbcinst.ini file containing:
[FreeTDS]Description=FreeTDS Driver Driver=/usr/lib/x86_64-linux-gnu/odbc/libtdsodbc.so Setup=/usr/lib/x86_64-linux-gnu/odbc/libtdsS.so
need to add folowing to docker file
ADD odbcinst.ini /etc/odbcinst.ini
RUN apt-get update
RUN apt-get install -y tdsodbc unixodbc-dev
RUN apt install unixodbc-bin -y
RUN apt-get clean -y
need to change connection in .py to
connection = pyodbc.connect('Driver={FreeTDS};'
'Server=xxxxx;'
'Database=DCMM;'
'UID=xxxxx;'
'PWD=xxxxx')
Now the container compiles, and gets data from SQL server
Running through this recently I found it was necessary to additionally include the following line (note that it did not build without this step):
RUN apt-get install --reinstall build-essential -y
The full Dockerfile looks as follows:
# parent image
FROM python:3.7-slim
# install FreeTDS and dependencies
RUN apt-get update \
&& apt-get install unixodbc -y \
&& apt-get install unixodbc-dev -y \
&& apt-get install freetds-dev -y \
&& apt-get install freetds-bin -y \
&& apt-get install tdsodbc -y \
&& apt-get install --reinstall build-essential -y
# populate "ocbcinst.ini"
RUN echo "[FreeTDS]\n\
Description = FreeTDS unixODBC Driver\n\
Driver = /usr/lib/x86_64-linux-gnu/odbc/libtdsodbc.so\n\
Setup = /usr/lib/x86_64-linux-gnu/odbc/libtdsS.so" >> /etc/odbcinst.ini
# install pyodbc (and, optionally, sqlalchemy)
RUN pip install --trusted-host pypi.python.org pyodbc==4.0.26 sqlalchemy==1.3.5
# run app.py upon container launch
CMD ["python", "app.py"]
Here's one way to then actually establish the connection inside app.py, via sqlalchemy (and assuming port 1433):
import sqlalchemy as sa
args = (username, password, server, database)
connstr = "mssql+pyodbc://{}:{}#{}/{}?driver=FreeTDS&port=1433&odbc_options='TDS_Version=8.0'"
engine = sa.create_engine(connstr.format(*args))
Based on KÃ¥re Rasmussen's answer, here's a complete dockerfile for further use.
Make sure to edit the last two lines according to your architecture! They should reflect the actual paths to libtdsodbc.so and libtdsS.so.
If you're not sure about the paths to libtdsodbc.so and libtdsS.so, try dpkg --search libtdsodbc.so and dpkg --search libtdsS.so.
FROM python:3
#Install FreeTDS and dependencies for PyODBC
RUN apt-get update && apt-get install -y tdsodbc unixodbc-dev \
&& apt install unixodbc-bin -y \
&& apt-get clean -y
RUN echo "[FreeTDS]\n\
Description = FreeTDS unixODBC Driver\n\
Driver = /usr/lib/arm-linux-gnueabi/odbc/libtdsodbc.so\n\
Setup = /usr/lib/arm-linux-gnueabi/odbc/libtdsS.so" >> /etc/odbcinst.ini
Afterwards, install PyODBC, COPY your app and run it.
I was unable to use all of the above resolutions, I was keeping al kind of errors relating to the pyodbc package, in particular:
ImportError: libodbc.so.2: cannot open shared object file: No such file or directory.
I ended up with another resolution which defines the ODBC SQL Server Driver specifically for an Ubuntu 18.04 Docker image, in this case ODBC Driver 17 for SQL Server. In my specific use case I needed to make the connection to my MySQL database server on Azure via Flask SQLAlchemy, but the latter is not a necessity for the Docker configuration.
Dockerfile, with most important part adding the Microsoft repository and installing msodbcsql17 and unixodbc-dev:
# Ubuntu 18.04 base with Python runtime and pyodbc to connect to SQL Server
FROM ubuntu:18.04
WORKDIR /app
# apt-get and system utilities
RUN apt-get update && apt-get install -y \
curl apt-utils apt-transport-https debconf-utils gcc build-essential g++-5\
&& rm -rf /var/lib/apt/lists/*
# adding custom Microsoft repository
RUN curl https://packages.microsoft.com/keys/microsoft.asc | apt-key add -
RUN curl https://packages.microsoft.com/config/ubuntu/18.04/prod.list > /etc/apt/sources.list.d/mssql-release.list
# install SQL Server drivers
RUN apt-get update && ACCEPT_EULA=Y apt-get install -y msodbcsql17 unixodbc-dev
# install SQL Server tools
RUN apt-get update && ACCEPT_EULA=Y apt-get install -y mssql-tools
RUN echo 'export PATH="$PATH:/opt/mssql-tools/bin"' >> ~/.bashrc
RUN /bin/bash -c "source ~/.bashrc"
# python libraries
RUN apt-get update -y && \
apt-get install -y python3-pip python3-dev
# install necessary locales, this prevents any locale errors related to Microsoft packages
RUN apt-get update && apt-get install -y locales \
&& echo "en_US.UTF-8 UTF-8" > /etc/locale.gen \
&& locale-gen
# copy requirements and install packages, I added this for general use
COPY ./requirements.txt > ./requirements.txt
RUN pip3 install -r ./requirements.txt
# you can also use regular install of the packages
RUN pip3 install pyodbc SQLAlchemy
# and if you are also planning to use Flask and Flask-SQLAlchemy
Run pip3 install Flask Flask-SQLAlchemy
COPY ..
# run your app via entrypoint or change the CMD command to your regular command
COPY docker-entrypoint.sh wsgi.py ./
CMD ["./docker-entrypoint.sh"]
This should build without any errors in Docker.
My database url looked like this:
import urllib.parse
# name the sepcific ODBC driver by version number, we installed msodbcsql17
params = urllib.parse.quote_plus("DRIVER={ODBC Driver 17 for SQL Server};SERVER=<your.database.windows.net>;DATABASE=<your-db-name>;UID=<username>;PWD=<password>")
db_uri = "mssql+pyodbc:///?odbc_connect={PARAMS}".format(PARAMS=params)
And for the bonus if you are using Flask-SQLAlchemy, your app config should contain something like this:
app.config["SQLALCHEMY_TRACK_MODIFICATIONS"] = False
app.config["SQLALCHEMY_DATABASE_URI"] = db_uri # from above
Happy coding!
How to install the necessary dependencies for pyodbc is related to the linux distribution and its version (in docker case, that is the base image of your docker image). If none of the above work for you, you can figure out the commands by trying in the docker container instance.
First, exec into the docker container
docker exec -it <container id> bash
Try various ways to get the distribution name and version of your linux. Then try different instructions in Install the Microsoft ODBC driver for SQL Server (Linux)
Here is a working example for Debian 9 based images, deriving exactly as the document instructions.
# Install pyodbc dependencies
RUN curl https://packages.microsoft.com/keys/microsoft.asc | apt-key add -
RUN curl https://packages.microsoft.com/config/debian/9/prod.list > /etc/apt/sources.list.d/mssql-release.list
RUN apt-get update
RUN ACCEPT_EULA=Y apt-get -y install msodbcsql17
RUN apt-get -y install unixodbc-dev
RUN pip install pyodbc
For me to solve this issue I also had to add the following 2 lines in the dockerfile:
RUN echo MinProtocol = TLSv1.0 >> /etc/ssl/openssl.cnf
RUN echo CipherString = DEFAULT#SECLEVEL=1 >> /etc/ssl/openssl.cnf
For those who wanted to do official microsoft approach to install odbc driver and use python:slim docker image, you can use this as DockerFile:
FROM python:3.9-slim
RUN apt-get -y update && apt-get install -y curl gnupg
RUN curl https://packages.microsoft.com/keys/microsoft.asc | apt-key add -
# download appropriate package for the OS version
# Debian 11
RUN curl https://packages.microsoft.com/config/debian/11/prod.list \
> /etc/apt/sources.list.d/mssql-release.list
RUN exit
RUN apt-get -y update
RUN ACCEPT_EULA=Y apt-get install -y msodbcsql18
Then for sqlalchemy's this can be called:
con_str = f"mssql+pyodbc://{username}:{password}#{host}/{db}?" \
"driver=ODBC+Driver+18+for+SQL+Server&TrustServerCertificate=yes"
engine = create_engine(con_str)
I created a Gist on GitHub on how to do this. I hope it helps. I had to piece things together from what I found on different resources.
https://gist.github.com/joshatxantie/4bcf5d0243fba63845fce7cc40365a3a
Goodluck!
I fixed this problem by using pypyodbc instead of pyodbc.
pip install pypyodbc==1.3.5
https://pypi.org/project/pypyodbc/
Found the hint here:
https://github.com/Azure/azure-functions-python-worker/issues/249
For not more problem use library for python
pymssql this not need install driver
pip install pymssql
import pymssql
conn = pymssql.connect(server, user, password, "tempdb")
cursor = conn.cursor(as_dict=True)
cursor.execute('SELECT * FROM persons WHERE salesrep=%s', 'John Doe')
for row in cursor:
print("ID=%d, Name=%s" % (row['id'], row['name']))
conn.close()
and work in docker